We were assigned to do this master thesis by Husqvarna AB who at the time for this thesis just had implemented a new material and production planning system called Replenishment system. Husqvarna AB wanted us to examine the effects of their new planning system to see if it was profitable or not. Husqvarna AB had for a time considered their delivery and supplier service to bee their biggest problem and they wanted to solve this problem by improving the communication with all involved actors in the logistic chain, which they hoped would result in a better mix of products in their warehouses. The aim of this report was therefor to analyze eventual effects for Husqvarna AB when changing from a traditional material- and production planing system to a more information intensive one. The result of this report showed effects on decreasing administrational routines and improved flexibility and lead-times.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Car-commercials are something that many people come in contact with on a daily basis.This is a study on commercials for cars and is focusing on visual effects that are madein post-production. In this report we are trying to find out if and how visual effects incommercials for cars affect how the observer remembers them. The second subjects thatwe use in this report is popularity and we try to find out if and in that case how visualeffects affect the commercials for cars popularity. We also investigated how frequentlycommercials for cars are showed on TV and how the visual effects are in them, it givesa better foundation to the other parts.The methods we applied were interviews, quantitative and qualitative content analysisof car commercials and also observation analysis of the 6 swedish TV-channels thatshows commercials and have the most viewers, to get an idea how frequently thesecommercials are shown. The commercials that were applied in this paper was from late2011 to early 2012.

I am a glassblower and I am a woman. In this project I've been working with alternative representations of the female body, muscles and technology. Mouthblown objects contains traces of body and form representations.I've been using muscle sensors to collect data from my arms while I blow glass. A special has made 3D-models from the collected data and I've blown these viritual objects in glass.My work is based around issues like: What happens when I measure my muscles? Am I (and my process) affected by the data gathering? How can I create alternative representations of the female body? What is the relation between glassblowing, the objects, body and gender?.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

This report is the result of a sub-project of a larger project to create a platform formathematical education. The sub-project focuses on authentication with associ-ated security, where security is emphasized. The project environment is Java EE 6where GlassFish 4.0 acts as the server. The project has been divided into threeparts; password encryption, Java EE authentication and brute force attack. Thepassword encryption part focuses on examining different hash functions executionspeed, the result shows that none of the examined hash algorithms is suitable fordirect use.

?Development of methods for the planning and implementation of ditch clearing with modern methods?, is a long title for an exam work but that is what this report describes. In Sweden, we have a limited area available, and with the present development with increasing market oil prices, and enormous forces on the renewable energy sources, we need every hectare possible to protect the output of the forests. So with this in mind, many people are now considering how to increase the production of the forests that are already available. A part of production increases is to manage the existing forests, and not to allow this area to go to cultivation or become marshland. We manage our forests in a way that benefits the environment, and we consider that our working practice over the years has shown us to be correct and well functioning. A part of our way of producing forests is to ensure that we have functioning drainage systems in the forest holdings which we administer. The responsible at Holmen Skog requested a good method to make inventories of the drainage systems of Holmen forests. This Degree Project is about ways to identify and implement drainage systems with modern methods. It deals with authorities regulations, and how they operate in different counties.

Society has depended on fossil-based fuel for a long time, which has led to a fundamental increase of greenhouse gases in the Earth?s atmosphere. To tackle this problem the international community has agreed that action is necessary. Focus is now directed towards local extraction of energy from renewable sources such as biogas.Utö is participating in the Green Island project, which aims to investigate the possibility of making the island climate neutral. This report has been implemented on behalf of Skärgårdsstiftelsen, the main partner responsible for the Green Island project in Sweden.

This essay deals with the same task that utilitarians have tried to solve for a long time, what is happiness? In the eighteenth-century utilitarians suggested that happiness should be the base for social political decisions. But the lack of definition disposed so that GDP became the measurement of happiness, which proved to be wrong when the unhappiness continued to increase. More than two hundred years later scientists came up with a new definition of happiness and new ways to measure it. And during the last decade economists have taken the discussion to a higher level.So once again we?re dealing with the same old issue, if happiness ought to be the base of social political decisions.

This report describes the development of a high-voltage connector at the request of Scandinova Systems AB in Uppsala. The development process is described from the making of a customer demand specification, to the making of drawings for the manufacturing of prototypes. Scandinova develops high-voltage modulators, hence the need for connectors that can handle very large power pulses. Their current connector has several weaknesses that may cause the connector to melt or catch fire. The development began with a number of studies that included the modulator structure and the current connector structure and functions.

This essay is regarding the problematic facts about child poverty in Sweden. Since the beginning of the new millennium child poverty has increased, in Sweden. The last report which came out in the spring this year (2012) opened up for a lively political debate as well as big headlines in news papers and other media. The attention it got in Society became hard for the politicians to avoid. The Swedish section of Save the Children, demanded in their report concerning child poverty in Sweden that the Swedish Government need to do an inquiry about the increasing child poverty.  Today in Sweden, there are two big parties, and they have been the biggest for a long time now.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Today's real estate buyers value the purchase different today compared to a decade back. Previously it was the return value that ruled the market. This has created problems when the broker must allocate the purchase price of the property's various elements, because non-monetary values such as forest for leisure, recreation, and the feeling of owing has increased in recent years and an increasingly important part in the valuation process. The assessed value can be a guide, but is perceived today to be stereotyped to put a fair value at the individual item. The purpose of this study was to provide the real estate agent decision support and a guide to the likely value of accounting for the purchase price. The report is written on behalf of LRF Konsult. The result is based on a questionnaire survey which was conducted in June 2014 among all those who had bought a farming property in Dalarna and Gävleborg province mediated by LRF Konsult in 2013. The report was made with a split to see if the valuation and motives differ between new and previous owners. It was possible to see a big difference in the reason for the purchase, where a large share of new owner bought the land for capital investment, in contrast to previous owners whose biggest group bought for an active use. At several points it was possible to identify a higher non-monetary value of the new owner from the previous landowner.