This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This report describes the tactics used by the Swedish Air Force rescue services against crashed military aeroplanes and helicopters. The aim of the report is to study and analyze the tactics used by the different Air Force bases, standards, regulations and equipment. The report also discusses the different work environment problems and hazards around military ARFF. Much of the information gathered for the report comes from interviews with personnel working in and with the military rescue services. The overall conclusion is that the basic conditions for a good ARFF tactic are there, but a lot needs to be improved and optimized..

This report aims at giving you as a reader a basic knowledge in measurement techniques used in the road/land construction and witch instrument and methods that is commonly used. It also tries to shed light on the problem with unfinished or incomplete blueprints, which cause additional work performed by the surveyor. This report is written in collaboration with PEAB Umeå whom has given insight in their work.The goal of this report is to examine what kind of work surveyors has to perform on blueprints delivered by a technical consultant. The reader of this report gets a run-through of the different theoretical measurement techniques used today and a short explanation of different measuring instruments used by surveyors in their day to day work. Computer programs used in the field of construction are briefly explained, and some of the most common file extensions used, for example dwg and Land-xml.The report concludes in a questionnaire that was sent out to surveyors employed by PEAB.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

The aim of this study is to describe a group of youths in compulsory care at a SiS institution in the south of Sweden. The study focuses on intelligence (measured with WISC-III) and self-report, i. e. what the youths think of themselves (measured with Jag tycker jag är). Attempts were made to see if background factors (based on information from the standardized ADAD-interview) seem to be coherent with intelligence and/or self-report and if so, what those background factors are.

iPhone belongs to the group smartphones. It is a type of mobile phones that has a richer interface and allows more advanced preformences, i.e surfing the Internet and handling e-mails. This report outlines the work to develop an iPhoneapplication from idea to released product. The project is a thesis which was commissioned by ICA AB (a major Swedish grocery chain). The report includes how the work has been carried out in practice and theory.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

The report contains three parts. The first part is a summary and overall presentation of thermalcracks and preventing measures against such cracks. This is a theoretical part where theinterested designer can get acquainted with various alternatives, be guided to more detailedliterature, and receive some practical information regarding the design of the respectivemeasures.The second part deals with calculation of the risk for thermal cracks and design of water coolingas a limiting measure. Two complementary methods are reviewed for efficient calculation:?the handbook method CraX1(by Lulea University of Technology) is used for quickverification?finite differential analysis in the calculationtool ConTeSt Pro for more precise projectingHere is also presented a development of existing standards through design of the cooling systemby means of the Bernoulli equation.

This report describes how wavefiles can be recorded with programs written in the C++ language . The report also describes how the recorded sound is handled before it can be analyzed. The report describes the different parts that make a wave file to a wave file and how Windows handle these files. There is always some silence or noise of unknown length that passes through the system before some interesting sound arrives. That silence or nose must not be recorded and therefore some function must be developed that can detect interesting sound or speech.

The purpose of this thesis is to gain a deeper understanding about why Swedish banks choose to work and report CSR and also analyze differences and similarities between two banks.Research question: Why do Swedish companies within the financial sector choose to report and work with Corporate Social Responsibility?The major incentives to work and report CSR are because it benefits bank´s businesses, which is driven by stakeholders. Stakeholder pressure is also an important incentive, especially pressure from customers and employees. The incentives that differed between the two banks were morality of the business leader, society and the priority of stakeholders. The incentives that we could not support were guidelines and competitors-.

This student report is about canine infectious skin diseases. It is primarily directed at veterinary assistans. The report includes a description of the skin?s structure and immunologic defences. The four types of allergic reactions are described. Different diagnostic techniques are also accounted for. The skin diseases included in the report are: fleas, lice, Sarcoptes scabiei, ringworm, Cheyletiella and leishmaniosis.

This dissertation is a case study on the Co-branding between Prada and LG, ?The Prada phone by LG?. The purpose of the study is to broaden the understanding of Co-branding and the effects this type of collaboration can have on a company?s brand. The research questions are: ?What effects can a Co-branding have on a company?s Brand Equity?? and ?How can these effects be measured??.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.