SummaryIntroductory: Since the mid-90s, the numbers of places in psychiatric inpatient settings have decreased and accommodations for individuals with schizophrenia have become increasingly common. In addition to the basic needs that we humans have, individuals with schizophrenia may be in need of special support. Social support can be seen as a protective factor for maintaining health and the recovery of the individual. Lack of social support has shown to be linked to mental illness. The extent of need and support of individuals with mental disabilities may be such that they live in a special accommodation where such assistance can be provided by staff.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

All small- and medium-sized family owned enterprises need to sooner or later undergo a change of ownership. When the elder generation is approaching their retirement they have to make a choice; either hand over the business to the younger generation or sell it to an outsider. The succession of the family owned business can create a life long dilemma for the entrepreneur. From the view of taxation there are, according to current legislation, no reasons to plan the succession to the younger generation. If no preparation has been done, the optional law system concerning inheritance will divide the property left.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The intention of this essay is to describe the problems with loss of books at three Swedish University libraries. It?s based on interviews with librarians. The library codes of ethics, the library law and the terms of reference of the libraries are central for my understanding. Interview results: Little was being done to stop theft.

                                  The study aimed to explore how patients with ICDs experience their quality of life with a focus on everyday life, electric shocks, and how support from the health service is perceived. The studydesign is descriptive with a qualitative approach. Semi-structured interviews were conducted with seven patients. Data collection lasted for three weeks and interviews were conducted in the participant´s homes, at the participants? workplaces or over the phone.The study shows that most participants have learned to live with the ICD.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Not enough attention has been paid to the correlation between the failure of peacekeeping operations and the actual source of civil wars. This text is an attempt to fill that gap. Hence the question: under which conditions is it possible for peacekeeping operations to replace the responsibility of the state concerning the security aspects of the social contract? The outset of the text, using the theories of Robert Nozick, is a theoretical approach towards the founding of states, described as the merging of entities. The theory serves a purpose since it, in combination with identity, illustrates in what manner the glue of society occurs and the rallying around other kind of loyalties like clans and ethnicities.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

En central del i ett systemutvecklingsprojekt är de tekniker som används för att strukturera organisationer och informationen i dessa. I flera årtionden har traditionella tekniker utvecklats. Exempel på tekniker som anses traditionella är ER-modellering och dataflödesdiagram. Idag används objektorienterade programspråk mer och mer för att implementera databaser. Det har dock inte funnits stöd för att analysera ett system objektorienterat förrän i början på 1990-talet.

The aim of this study is to enhance the knowledge of target and performance management?s effects on the judiciary. In the past decades there have been a number of reforms in the general public sector of many countries. The management philosophy often used to describe these public sector reforms is called New Public Management (NPM). One main theme has been an increased focus on the management control systems, for example a greater emphasis on target and performance management.