This master thesis is about Augmented Reality (AR), a phenomenon that has existed since the mid-fifties but only recently has become available for the general public. This report is a knowledge compilation about AR, focusing on AR in cell phones and the use of the technology in traffic related situations.AR is usually described as adding a digital layer of information onto the real world. There are different technologies to make virtual images; in cell phones sensor-based and camera-based technologies are the most common ones.In this report, the market of AR applications for cell phones has been investigated. Three use cases have also been investigated in order to get more knowledge about the designers' thoughts and visions.In order to analyze the technology and the applications in a broader and more scientific perspective, two theories has been used: Situation Awareness (SA) and the Service Dominant Logic (SDL). These theories seem useful when reflecting on the Swedish road administrations vision, and to investigate what the applications and the AR technology can contribute to the traffic domain.The conclusions of this thesis are that:- AR can be applied on most of the human senses, but augmenting by visualization is most common.- The market for cell phone applications is growing rapidly: AR applications are relatively new but on the rise.

The purpose of this essay is to investigate if signage for tourists in Stockholm is enough to easily find your way to attractions and public modes of transport and how the city works with the issue. Triangulation was chosen for the essay, that is, a mix of qualitative and quantitative methods. A survey of 100 tourists was carried out in the Old town of Stockholm and interviews were made with stakeholders in the tourism industry and signage policy in Stockholm. The survey showed that most of the tourists found it easy to find their way in Stockholm and that they were content with the signage. Few of the tourists thought it was difficult to find their way in Stockholm.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

?ÄTA-work? (Changes, Supplementary and Retiring works) is more or less common in all construction projects whether it is about houses, roads or railways, in the planning stage, or in the construction stage. For the Swedish Transport Administration, which is the largest purchaser of infrastructure in Sweden, ÄTA-work is a hotter topic than ever.Economists and managers want to draw conclusions on the projects share ÄTA-work, while the project manager is concerned about whether it is possible to draw any conclusions at all as each project is unique in itself and has its own merits. There is a big variation in the amount of ÄTA-work in different geographic districts in the Swedish Transport Administration.This study shows that the Swedish Transport Administration does not have a unanimous approach regarding the management of ?ÄTA-work?.

Kan man förhöja hela upplevelsen av att resa kollektivt genom att förändra textilierna i denna miljö? Hur anpassar man sin estetik till en miljö som är så hårt utsatt för smuts, slitage och skadegörelse? Kan man genom att förändra textilien skapa en bättre relation mellan passageraren och sätet?Textile design for public transport..

Sweden has a natural gas grid extending along the west coast, from Trelleborg to Stenungsund. There are also several smaller local networks where a planned natural gas pipeline from Skutskär to Hofors prompted the need for a comprehensive study. This study examines the linkages that exist in terms of technology and market of natural gas and biogas in Sweden. Sweden has set high targets for the future with ambition to become independent of coal and oil as energy sources. Since 1985, a part of the solution has been import of Danish natural gas.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

We are in an emerging digital society where we are increasingly dependent on the mastery of IT and digital technologies to better carry out our everyday tasks. They cover everything from keeping in touch with family and friends to pay bills and declare. At the same time there are those who have not learned how to use the new technology and live their lives outside of the digital society. What happens to these people, in a society that is becoming increasingly digitized? Do they take harm by being in digital exclusion? It looks like this are issues that will not become less important as digital technology constantly changes.

This research is based on the observation that people in the service industry is being replaced by technology.  This insight formed a foundation for the presentation of the problem this essay is based upon. We began to speculate over how tourist information bureaus handle the changes, regarding information technology, in their surroundings when their main task is to inform and communicate with their market. Information technology has created new possibilities for organizations to reach their consumers and it has influenced all kinds of industries. We decided to examine organizations in the tourism sector because it is one of the biggest and fastest growing industries in the world. The entering of information technology in the tourism industry has changed its structure and we want to examine how tourist information bureaus succeed to deal with this phenomenon.The aim with this essay is to examine how and to what extent tourist information bureaus integrate with changes in their surroundings caused by information technology and which values that slip away/ is added by the adaption.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

This report discusses how well the competences the master program in Information Technology, given by the Royal Institute of Technology, meet the demands from the business life. It is made qualitative and about 20 companies have taken part to get the results. The study has been made to see how well the three first years and the entire five year master, with different aiming, meets the demands. The results shows that the master program needs to be remodeled to meet the demands in the more ?softer competencies?, which for example is people management and an understanding about economical, juridical and cultural aspects.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

The purpose of this thesis is to examine the Swedish Plymouth brethren?s relation to contemporary technology. What types of technology are considered acceptable and where do they draw the line? Due to the brethren?s separation from the parts of the world they believe leads people away from God, such as the entertainment industry, immoralities etc., they reject use of television and radio. These two are viewed as uncontrolled types of technology since the user does not have control of its contents.