This thesis has been made on behalf of Forsmarks Kraftgrupp AB and is the final part of the education of Bachelor of Engineering in ? Innovation, production and logistics atMälardalens Högskola.Forsmark nuclear power plant is located in Östhammars municipality at the coast of Uppland. The three nuclear reactors in Forsmark together produces approximately one-sixth of Sweden?s electricity consumption each year.The background of this study is that a large number of requests come to the purchasing department with incomplete information. Usually it is in the description of what is to be acquired as the information is incomplete, but also in knowing when Quality Control-functions (QC) is supposed to be used.The aim of this work is to describe and analyse the material acquisition process.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

Detta är vårt C-arbete där vi valde att göra ett sällskapsspel av vår frågeställning. Spelet går ut på att producera en film, den spelare som producerar den bästa filmen vinner Oscar för bästa film och även spelet. När man spelar spelet så lär man sig hur en filmproduktion går till och vilka komponenter som är extra viktiga när det gäller bedömningen för vinnaren av Oscarstatyetten för bästa film..

The level of increased central government that we have experienced during the last decades in school, for the purpose of increasing equality and to adapt the Swedish school to a certain international standard, clearly shows that increased control scarcely leads to improvement.The aim of this paper is to examine whether teachers believe that national tests contribute to equivalent assessment and increased goal attainment. Furthermore the teachers? attitude towards and work with national tests is described. The paper is written from a school improvement perspective, where good examples from current research on what creates increased quality in school meaning increased goal attainment and equivalent assessment are related to research on school effectiveness and increased testing in schools. The study builds upon a quantitative survey among teachers in upper primary - and secondary school in a medium-sized municipality in Sweden.The result shows that the teachers have a somewhat more positive than negative attitude towards national tests, as a whole.

The aim of the study was to illustrate how music therapy can be used in the care of patients with schizophrenia and other psychotic illness.The method used was a literature review. Scientific articles were searched in PubMed, Cinahl, PsycINFO och Scopus databases with an outcome of ten articles, with in total 330 participants, that underwent quality and outcomes analysis.The results showed that music therapy could provide potential improvement in the patients' social functions and that it could also improve negative, some positive and general schizophrenia and psychotic symptoms in some patients. The form of music therapy used was often creative music activities with music therapist, with or without structure, or individually customized. The length of treatment varied widely. It was not possible to draw conclusions about which type of music therapy was best.

The purpose of this essay is to see if villages or bigger settlement locations can be found in south-eastern Blekinge during the viking age. There have been many archaeological findings from this period in Blekinge, for example grave findings, ring-forts , old roads and ancient harbors. But no evidence of a village has been found yet. If south-eastern Blekinge is compared with the area surrounding Järrestad on Österlen in south-eastern Skåne and the area surrounding Sorte Muld on Bornholm, many likenesses can be seen. In this essay, the findings in Blekinge will be used as different components when the three areas are compared with each other.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

In 2005, Outokumpu began to implement its system of continuous improvement, OK> 1, at Avesta Jernverk. OK> 1 has not generated sufficient results on plant KPI:s. The purpose of this study is to identify the understanding,  participation and commitment regarding to OK> 1, and to suggest some actions to make OK> 1 more successful with emphasis on these three aspects. The thesis shall also determine whether there are any differences in the attitude towards OK>1 between Blue Collars and White Collars.The study consisted of a survey, and interviews. The output from these methods were processed and analyzed and finally resulted in a SWOT ? analysis and suggested actions for improving the understanding, participation and commitment towards OK>1.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.