I den här rapporten presenterar vi vår argumentation angående datoriseringen av två arbetsuppgifter på Habiliteringen, Karlskrona har inneburit ett understöd av det direkta arbetet med patienter eller av det administrativa arbetet. De anställda anser att den direkta kontakten med patienten är det viktiga, medan dokumentering och det administrativa arbetet är det ?oviktiga?, aspekt som också framgår från vår empiriska undersökning. Det finns en ambivalens med datoriseringen av dessa arbetsuppgifter som vi beskriver i vår uppsats. Å ena sidan stödjer datoriseringen dokumenteringen och det administrativa arbetet, det oviktiga, medan å andra sidan användningen av dataprogrammen har en stor potential i att indirekt understödja huvudarbetet, det direkta arbetet med patienter, vilket är det viktiga. För att belysa de här aspekterna skildrar vi i vilket syfte de anställda använder dataprogrammen, på vilket sätt de använder datorn och dataprogram, och de olika problemen som har uppstått sedan datorn har införts. Vi föreslår ett antal förslag/förbättringar som kan leda till effektivisering av huvudarbetet (arbetet med patienter) och kollateralt av arbetssättet..

This thesis revolves around co-opetition and boundary spanning activities with IETF (Internet Engineering Task Force) as research case. The main objective is to through qualitative interviews and a passive observation of email conversations explore how the participants of IETF experience and is affected by a double membership where they sometimes are cooperating with their competitors. Theories states that boundary spanning activities can create role conflicts for these participants when different role-senders, IETF and the employer, send incompatible expectations. We also believe that this can have a negative impact on discussions and the standard development process, which is why we are conducting the passive observations mentioned above.The result shows that the environment of co-opetition is a contributing factor to role-conflicts. These conflicts appear when participants are forced to choose between the role as an employee and the role as an IETF participant.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

This study's interest area loops around how it is possible to understand texts' leverage over human thinking and acting. Focus lies on understanding which forces that form people?s views around men and women's relationships and relations in the public room. From this perspective our interest is to explore how the phenomenon rape is expressed in texts and how we can understand how rape through these texts are to be shaped in individuals' thoughts awareness and. Finally, it is also relevant to create understanding for how rape as a discoursive practice can have effects on individuals and society.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

It is a well-known fact that textiles and carpets have benign sound-absorbing properties. It is desirable to have quantified values of these properties ? especially for architects and interior designers. They often need to be able to giveaccount for the acoustic properties of their designs at a relatively early stage and sometimes have strict acoustic classifications imposed upon them by their contractor. A product with documented acoustic properties would aid when prescribing interior elements.The purpose of this thesis is to develop a wall-mounted panel in hand-tufted material ? aesthetically pleasing and versatile but also having documented and quantified acoustic properties.

A trend in modern landscape architecture is to design pedestrian streets so that vehicles and people move in the same area. By doing this, traffic tends to slow down. On the market though, there is a lack of furniture that corresponds to the requirements of these kinds of public places. Therefore, I have designed this furniture, called VOX, which is planned to be used on streets, schoolyards and squares. One objective has been to promote the product to the industry.To achieve this, I have been in contact with people from different professions, which have all influenced my designprocess.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This Master thesis discusses the development of a virtual human soft tissue object for use in exercise applications of various medical procedures.The soft tissue object to be developed shall look like, feel like and behave as living human tissue. It shall give the user a realistic feeling of weight, softness and roughness, and shall behave in a correct way for exercise purposes. The soft tissue model is to be used in a three dimensional stereo graphic environment with haptic feedback. A prototype for practicing the procedure of inserting a catheter is built. The prototype is used to evaluate the potential of the virtual environment for medical exercise applications, and to assess the realism and usability of the soft tissue object.

This thesis presents a system which has been implemented to satisfy a need in theresearch on how speech planning interacts with syntactic and prosodic structure inspontaneous speech. The long-term purpose of the research is to provide models forautomatic parsing of spontaneous speech and for psycholinguistical modelling of speechproduction. Identification of inhalation pauses is an important step in the developmentof automatic methods for spontaneous speech parsing.Identification of inhalation pauses is considered to be a keyword-spotting speechrecognition problem. Hybrid HMM(Hidden Markov Models)/ANN(Artificial NeuralNetworks) approach is applied to this problem. Method gets 90,8% in Recall, 66,4% inPrecision and 76,7% in F-score.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Produktframtagningen av en moduluppbyggd destinationsskylt för bussar utfördes på Högskolan i Skövde i samarbete med företaget Mobitec AB som bland annat säljer de skyltar som används i stadsbussarna i London. Den destinationsskylt som togs fram var tänkt att fungera som ersättare för de tryckta dukskyltar som var befintliga i Londons stadsbussar och var därför tvungen att leva upp till deras krav på upplösning och läsbarhet. Detta skulle åstadkommas genom att bygga upp skylten med ett modulärt system av Super Fine Pitch LED Matriskort. Modulsystemet behövde klara viss påfrestning från vibrationer från bussen och tillåta enskilda moduler att lätt monteras och demonteras. För att ta fram ett fungerande system användes riktlinjer för DFA och DFD och användarbehov från montörer och reparatörer undersöktes. Under idégenereringen användes Set-based concurrent engineering för att inte felaktigt vidareutveckla ej fungerande koncept på bekostnad av eliminering av fungerande koncept. Tre resterande, likvärdiga koncept modellerades och testades för vibrationssimulationer i Creo Parametric 2.0.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

Bolivia is a multiethnic country where the indigenous people constitute the majority of the population. Despite two decades of attempts to take the democracy further is its foundation more volatile than ever. The aim of this bachelor thesis is to examine if exclusion is taken place in Bolivia from year 1982 until today and if so in which way political exclusion constitute problems of democracy in Bolivia. The answer depends on the understanding of democracy used in the analysis. In this thesis I use theories of process-, participation- and deliberative democracy.