Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.

Introduction: 1 November 2010  came the amendment about the audit requirement into force. The amendment concerned only micro-enterprises. The most common form offinancing for micro-enterprises are bank loans, therefore the banks play a major role in the business and wellness of micro-enterprises.Purpose: Purpose of this paper is to examine if the credit assessment has been affected by the removal of the audit requirement for micro-enterprises.Method: This study will be conducted by a qualitative study in the form of interviews. Five interviews were conducted, with four respondents from the large banks and    one respondent from Almi Företagspartner.Conclusion: All respondents agreed that the audit is seen as a mark of quality, some lenders will continue to request it from the micro-enterprise while other lenders look at other factors such as ownership, relationship or business concept..

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

The purpose of this study is to highlight the second home sector in Sweden and Denmark, in a comparative study of regulations for the second home market, and residence requirement. Two attractive second home island destinations is being compared in Ven, Landskrona and Gudhjem, Bornholm. The study addresses issues such as the local effects of a regulation of the second home market get at a local level, and the effects generated by deregulation, as well as local people's opinions about second home regulation in a popular second home area in southern Sweden. This has been examined using a mix between qualitative method and quantitative methods, and the study is based on six semi-structured interviews from informants from Ven, Bornholm, and Gudhjem which has been analyzed throughout a thematic analysis. In addition to the interviews, diagrams from the Central Bureau of Statistics of Sweden and Statistics Denmark, and various real estate websites, and a field observation from Ven and Gudhjem will be presented.The result shows that show that the discussion on residence requirement has been going on for a long time in Sweden and Ven, but the local organizations found more disadvantages than advantages and are now looking in to other solutions, while other locals believes that there are more advantages with a residence requirement. In Denmark it?s revealed that there is recently started discussion between municipal decision-makers and local organizations about the regulations, and if it should be abolished or not.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.

This report describes the development of a high-voltage connector at the request of Scandinova Systems AB in Uppsala. The development process is described from the making of a customer demand specification, to the making of drawings for the manufacturing of prototypes. Scandinova develops high-voltage modulators, hence the need for connectors that can handle very large power pulses. Their current connector has several weaknesses that may cause the connector to melt or catch fire. The development began with a number of studies that included the modulator structure and the current connector structure and functions.

This thesis is a case-study of an ongoing court case between the Swedish Competition Agency and Växjö Municipality about a set-up requirement to the long-distance heating system for newly built private houses on municipality owned land. This requirement was set up as part of the municipality?s long-term environmental goals; however the Competition Agency claims that the demand is damaging the free market in the municipality. The purpose of this thesis is to determine which normative assumptions the decision makers have based their actions and re-action on, and whether or not these assumptions are valid, thru theoretical ideal types. This is determined via method of textual analysis.

In the light of new technology health care is now given the opportunity to form a more mobile way of working that would bring about potential gains in terms of efficiency and quality. On the other hand, a more mobile health care also requires a more generous handling of personal information, something that may raise issues in terms of privacy. This study shows that the privacy of the patient requires two things: (i) that the personal information of the patient is handled in a way that generates her an overall positive expected utility and that (ii) the negative expected utility that each risk of an information leakage causes is offset by the expected utility it also makes possible. The first requirement (i) is shown, in comparison with today?s way of working, to be met due to the potential gains in efficiency and quality in combination with no increase in the probability of informational leakage or negative effects of such a leakage. The second requirement (ii) was also considered met since no separate risks of information leakage could be identified that was not offset by the gains it made possible in terms of expected utility..