Scania?s discount rate - the return requirement of investments - refers to Scania?s WACC or weighted average cost of capital. The capital markets return requirement on equity and the credit market interest cost of borrowing is weighted to become the single discount rate, the WACC. The purpose of this study is to investigate which asset pricing model of APT and CAPM Scania should use in their WACC calculations. The company now uses a group WACC of 11 percent which is used in all company levels.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a Requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The main purpose of this study is to investigate and with it clarifying what is meant by a dismissal for personal reasons must be based on valid reasons. More specifically, what is valid reason and what is required for that demand to be regarded as fulfilled.To my help to achieve this I have asked questions such as what kind of behavior from the employee can be the basis for a valid termination of the employment, what factors do the court put emphasis on in a trial and what is the requirements for the employer during the dismissal.The study has further objectives which are to illustrate the phenomenon of valid reason from a diversity perspective and from an international perspective. To achieve those objectives following questions have been asked: Is some groups covered in a greater extent than others by the requirement that a termination of employment must have valid reasons and are there international counterparts to the Swedish requirement that a dismissal must be factually based.What emerged from the study judicial inquiry is that the phenomena to which the employee is guilty of first is to see as valid reason when the employee are aware of the obligations undertaken in the employment but acting against them and inflicts some sort of damage for the employer.With regard to the employer's obligations in a termination proceeding are they to see as comprehensive and can be summed up to the fact that the employer should do everything in his power to avoid a dismissal.When it comes to the factors a court should take into account is this also a matter of major proportions. The court shall take into account all of the circumstances relating to the dismissal, which means that, with absolutely certainty, determine in advance what the court will decide is an almost impossible task.Furthermore, it emerged from the study that the requirement that a dismissal for personal reasons must be based on valid reasons may come to certain groups of workers to a greater extent than others. The study's investigation also indicates that the Swedish legislation, as it reads today, probably in breach of regulations enacted by the European Union.   .

Den här rapporten redogör för utveckling, design och sömnadskonstruktion för en sadelpadd. Rapportens ämne valdes för att jag fann det intressant och har själv stort intresse för hästar och produktutveckling. Fokus på rapporten låg på att ta fram en fungerade prototyp som testades av hästägare för att se om en distansväv skulle klara av att vara det stötdämpande och tryckutjämnande materialet i en sadelpadd. Rapporten och utvecklingen av rapporten bygger på en enkätundersökning och några intervjuer med relevanta personer insatta i ämnena sadelpadd och ryggskador hos hästar. Utifrån den insamlade informationen från de intervjuade och de som svarade på enkäten samt tidgare skrivna källor gjordes en studie i hästars uppkomst av ryggbesvär.

Background: The audit has not always been as it is today. The first law requiring auditing was legislated in the Companies Act 1895. Many events have taken place in the audit history; among them was the Krueger crash, which affected the auditing profession hard in Sweden. This led to new recommendations and laws that would save the profession. Because of the events in the past, there are many who question the audit profession and discussions have been held regarding the auditor's independence and objectivity.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

Background: With the removal of audit requirement for companies in Sweden from the first of november 2010, a lot of companies has chosen not to keep the audit requirement. So far 57 percent of the small companies has chosen to keep the audit, in spite of that they don´t need to which led us to the problem statement: Which are the factors that affect a small limited company to choose to keep the audit, in spite that now there is a possibility to choose not to use audit anymore?Purpose: The purpose of the essay is to examine why small limited companies choose to keep the audit, in spite that now there is a possibility to choose not to use audit?Method: This research founds itself in a qualitative study with a deductive research approach. We have been studying secondary data in books and articles and preformed 29 phone interviews with small ltd company owners in Sweden. The selection consisted of 14 companies with credit debts and 15 companies without credit debts.

This thesis examines the problems related to IT in the Swedish healthcare system, specifically the drug searching part of the electronic healthcare systems used in Sweden. The question formulation is divided into two questions: What parameters and functions are of greatest importance when performing a search on drugs, and how should these be presented in a graphical user interface? Thus the purpose is to answer these questions through developing a design concept, in the form of a prototype, which describes how a drug search can be carried out.The entry point is a central quality checked drug database that is managed and owned by Swedish county councils and regions. The problem is attacked through user-centered methods where interviews of physicians and developers, in conjunction with observations, are used to give an overview of the problem area as well as to specify a requirements specification for the prototype that this thesis aims to develop. The thesis result is a requirements specification in combination with a prototype that exemplifies how drug searching can be performed, the prototype is based the requirements gathered from the interviews with the user group of physicians..

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

This report has a purpose to identify the payment methods available for e-commerce, tosee if they fulfill certain requirements. By investigating thirty of the most popular webshops, a few primary services have been found and revised. Security requirements fore-payment systems include authentication, non-repudiation, integrity and confidentiality.Other requirements considered to be important are usability, flexibility, affordability,reliability, availability, speed of transaction and interoperability. Advantages and disadvantageshave been identified to see if the services fulfill the requirements. Also surveysof consumer payment habits have been investigated to identify the factors of decisive importanceto the usage of payment services.

This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.

Kravhantering a?r en viktig del av systemutvecklingsprocessen. Genom att samla in, analysera och prioritera krav skapas en tydlig bild av hur ett framtida system ska fungera. De krav som faststa?lls kan anva?ndas fo?r utva?rdering av fo?rslag fra?n leveranto?rer och senare i systemutvecklingsprocessen fo?r utva?rdering av prototyper.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.