Large retirement numbers and fierce competition of available labour, results in municipalities have to be more attractive as an employer. One way for the municipalities to fulfil their staffing requirement is partly to increase their recruitment efforts, and partly to educate their existing employees. Discussions about the supply of competence are therefore pressing within municipal activity. The aim of the study was to investigate how the concept of competence is used within a municipal administration. The method that has been used is Norman Fairclough?s critical discourse analysis, a method that allows multi dimensional analysis.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

Sweden currently has no legislated regulation of lobbying, but the professional lobbyist can voluntarily subscribe to, among others, the professional code of standars created by the trade association of Public Relations, Precis. There is an ongoing discussion in Sweden to regulate lobbying, both in mass media and in politics. This study examines this debate and focus on which arguments there are for and against lobbying regulation in Sweden. It also attempts to identify the differences, if there are any, between left and rights parties with regards to their views on regulation of lobbying.Tha main method used was document analysis of parliamentary bills which have been raised concerning a lobbying regulation in Sweden. In the theory section, I include four different types of requirements placed on democratic lobbying (se for example Jaatinen 1998, Kitchen 1999, Larsson 2005, Möller 2009 and Naurin 2001).

 SammanfattningKravhanteringsprocessen är en av de viktigaste faserna vid utvecklandet av ett IT-system. Kravhantering är alltså grundläggande för att utveckla ett stabilt system som uppfyller beställarens önskemål. Med en väl utförd kravhantering som grund får man ett system som är fritt från bristfälliga fel, utvecklandet av systemet går även till på ett effektivare sätt. Vid byggandet av ett system eftersträvar man alltid en framgångsrik mjukvara. Kravhantering ses som den viktigaste faktorn vid utvecklandet av ett IT-system.Föreliggande studie genomförs som en litteraturstudie där undersöks vilka brister som är vanligt förekommande under kravhanteringsprocessen.

Syftet med uppsatsen är att analysera om det i samband med denavskaffande revisionsplikten skett förändringar i arbetssättet förbetydande intressenter samt undersöka hur synen på småaktiebolags trovärdighet efter reformen har förändrats.Metodik:I studien har ett kvalitativt tillvägagångsätt med en abduktiv ansatsanvänts. Insamling av data har skett genom semi-struktureradeintervjuer med respondenter från en arbetsgivarorganisation, trekreditgivare och två myndigheter.Resultat:De främsta slutsatser som dragits är att kreditgivares arbetssätt inteförändrats i den omfattning som förväntats. Myndigheternasarbetssätt har däremot påverkats i större grad, vilket förklaras medatt de arbetar mot intressenter på ett annorlunda sätt. Efterreformen är det inte trovärdigheten till bolag som förändrats, utantill de sammanställda räkenskaperna..

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

The aim of the study learn about if the court assesses boys and girls on an equal basis, or if there are norms of gender constructed in society that appears in the Administrative Court of Appeal. And we want to find out how norms, in this field, are different between boys and girls. We used the judgments of the Administrative Court of Appeal and went through the descriptions of the girls and boys. What basis was used in the judgment of LVU, to do this, we used discourse analysis. We summarized all judgments and then described the outcome of each requirement in LVU, we categorized the results for three requirements, other socially destructive behavior, criminal activity and abuse.

This Thesis is performed in cooperation with Kalmar Industries in Lidhult, Sweden. Theprojects main purpose was to develop a draft design of a test equipment. The equipmentwill simulate and valuate the drive-train and brakes at Kalmar?s bigger forklifts.The equipment will be designed so the wheels of the forklift are placed on two rollers;these absorb and affect the forklifts brake- and driving force. With this characteristic anup- and downhill can be simulated.

The development in electronics increases the demand for good design methods and design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two testcases has been designed. The testcases are selected to represent the FPGA designs made at Ericsson Microwave Systems.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

WebGL is a standard for drawing graphics in a web browser. Currently it isn?t widely understood how consistently WebGL performs across a majority of the de- vices that support it. Determining if an image looks correct to a human observer is an interesting problem. The solution for this is useful when developing WebGL applications, since a developer could make better informed decisions during de- velopment.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

The point of departure for this essay is the observation that themunicipality of Lund is giving priority to handicap associations overother forms of associations. This act can be regarded as trespassinginto the realm of civil society. In respect of this, two aspects appearto be particularly interesting to explore. The first is to determinewhich perspective of freedom the municipality of Lund holds. Ireconstruct how the liberal and the communitarian state relate to thenegative and the positive freedom.