Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

This paper examines the non-profit organization Friskis&Svettis in order to gain insight into whether governmentality is used and if it is being used in what way. Furthermore we analyzed the requirements and consequences that that may have developed out of this governance structure. To get answers to the questions asked in this paper, a qualitative approach has been taken by the use of interviews with officials at Friskis&Svettis Uppsala. The conclusions drawn from the survey is that there are factors that indicate that governmentality is used within the organization by way of the use of guidelines which can be seen as a technique to control individuals and point them in the desired direction, and the follow-ups that can verify that the guidelines are being followed by the officials. The guidelines and the follow-up have also been an organizational requirement.

There are over 1,5 billion Muslims living on earth and the religion is one of the world´s most increasing. Sweden is a country with a cultural diversity where about 300 000 Muslims lived in 1999. Today, the requirement for knowledge about caring for Muslims and the need of culturally competent nursing care are increasing.The aim of this study was to define cultural factors which the nurse has to recognize to be able to give culturally competent care to the Muslim patient. The method that has been used was a The Sunrise Model, which illustrates Leininger´s theory of culture care diversity and universality, provides a theoretical framework for the study. The results are presented on the basis of Leininger´s three cultural factors; cultural values, beliefs and lifeways.

This thesis is an addition to pictures and animation that has been developed using CATIA V5. The animation and the images are a market basis to test whether the product is of interest in the Nordic market. The thesis is structured with elements of the Fredy Olsson method. In this thesis there is also a short presentation of the company Tylö AB, which been chosen to market test the product. A product definition with the sub-headings; ?Description and use of product?, ?Environmentand users?, ?Economy? and ?Product inquiry?, are the basis for the product.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

Section 25-27, i.e. the rights of priority of the Employment Protection Act, is a form of post-employment protection which exists to support those employed on a part-time basis and former employees. When a vacancy arises an employer should first and foremost offer part-time employees employment at a higher level of occupation or offer employment to former employees. The various types of employment contracts, other than those valid for an indefinite term, have increased during the last decades on the Swedish labour market. Labour hire has become more common and therefore we find it interesting to investigate how the rights of priority apply.The purpose of this thesis is to describe and analyze the law with regards to labour hire when people with rights of priority are available.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

In this Bachelor's thesis the result from a Delphi study regarding FRBR, performed by Yin Zhang and Athena Salaba in 2007 and published in 2009 ? What is next for Functional Requirements for Bibliographic Records? A Delphi study ? is analyzed by qualitatively interviewing professionals active within the library and information science field in Sweden. The results are compared and possible deviations and adjustments are illuminated and discussed. The purpose of the thesis is to determine the topicality of the Delphi study in 2011 from a Swedish perspective. Conclusions made from the thesis shows that the main areas are still the same, but adjustments regarding the relative order of issues might be needed; primarily a shift of focus from theoretical to practical issues.

Gtherm is an innovation company who has an unique air heat exchanger underdevelopment. The purpose of this thesis is to provide data of suitable motors for theheat exchanger and to find suitable motor suppliers.A motor specification was designed. It is an important basis for the search of suitablemotors. A compilation was made of nine motor suppliers and the suitable motorsfrom those. The compilation can be used by GTherm in their choice of suppliers andmotors.The compilation of the demands on the motor and analysis of suppliers indicated thatthere were no standard motors available to GTherms air heat exchanger.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

The essay explores how the category ?religion? occurs and functions in the regulatory documents governing the Swedish public service companies. The study also highlights Swedens changed religious demographics and the changing media landscape. The material that is under investigation is the external and internal policy documents for Sveriges Radio, Sveriges Television and Utbildningsradion. The study is done by a qualitative content analysis which results are carved out by search units in relation to the category religion and then discussed and analyzed.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

The aim of the literature review was to illuminate the importance of nutritional management to patients who have sustained a traumatic brain injury (TBI) and describe nurses responsibility and meaningful function in the nutritional support. TBI patients tend to be associated with hypermetabolism and hypercatabolism, resulting in negative nitrogen balances. The results reveal increased energy expenditure and assessments of needs energy requirements at the TBI patients. This study determining the route of feeding: enteral versus parenteral nutrition. Furthermore describes complications associated with enteral feeding.