AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.

The theme in this report has been how to benefit experience from accident investigations. The demand on the municipality to perform accidet investigations is relatively new, and maybe they aren?t clear what the demands means. This causes that there might be a problem to benefit experience from accident investigations, for improving the overall safety in the municipality. The main purpose of this report has been to clarify how experience from accident investigations, can be of benefit to society on a local level.

Examensarbetets problemområde återfinns i den tidiga delen inom informationssystemutveckling. Denna utvecklingsfas, kallad Requirements Engineering (RE), innefattar aktiviteter för att förstå, dokumentera och validera de behov och krav som föreligger för ett framtida informationssystem. RE är en avgörande aktivitet i processen att utveckla ett informationssystem som tillfredsställer användare och kunders förväntningar och behov.De olika intressenterna som är involverade i RE-processen har olika roller, bakgrund och kunskaper. Av denna anledning föreligger olika problem och möjligheter med avseende på intressenterna. I examensarbetet utreds vilka dessa möjligheter och problem kan vara.

The purpose of this report is to study the relationship between the rescue service fire prevention activities and the number of arson fires in schools. An objective of the project is also to investi-gate the need of developing national methods for fire prevention. The results are based on a questionnaire study among 35 fire departments and further interviews with five of them. The results indicate that there is a relationship between the rescue service fire prevention activities and the number of arson fires in schools. The relationship is positive in the sense that arson fires in schools decrease with increasing prevention activities.

Denna rapport handlar om ett examensarbete utfört åt multimediaföretaget Animero. Det är ett litet företag med åtta anställda som jobbar med olika multimediaproduktioner med fokus på webb- och videoproduktion. Problemet för Animero var att det saknades en ordentlig kravspecifikation i projekten och att kunderna brukade utgå ifrån vad de själva tycker om istället för att tänka på dem som ska besöka webbplatsen. Vårt uppdrag blev att utveckla en applikation som ska ta fram underlag till en kravspecifikation vid beställning av webbplatser. Applikationen ska samla in information om kundernas målgrupp, deras företagsidentitet och de funktioner de vill ha med på webbplatsen.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

The aim of this study is to evaluate whether the value of occupant load is over or under estimated when the Swedish general value for department stores, 0,5 person/m2, is used for dimensioning shopping centers. The data that was analyzed derives from seven shopping centers and one department store. A conservative method was used to calculate the occupant load factor. The analysis shows that two groups can be discerned: one group that is characterized by a lower occupant load factor that does not exceed 0,3 person/m2, and one group with a higher occupant load factor. Shopping centers with a higher occupant load factor are located centrally in large urban areas.

The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

This report focuses on work schedules in the retail sector, where work schedules are dynamic and change according to the needs and work schedule is a requirement for an effective structure of the work. This structure is important for maintaining a good order and all this is a requirement for a profitable business for both long and short term future. Work schedule also contributes to safety at the workplace. The purpose of this study was to investigate the transfer of knowledge by work schedules. The HRM employee we interviewed worked in Reitan Servicehandel Sverige AB which includes 7-Eleven, Pressbyrån and Shell.

By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

Arbetet har utförts på ABB i Ludvika med avsikt att förbättra revisionsprocessenför kontroll och skydd. En revision är en ändring på ett godkänt och klarmarkeratobjekt. Då objektet i fråga redan kan vara levererat till kund och man behöver göraen ändring krävs en strukturerad process för att utföra denna ändring. Processen föratt göra detta är i dagsläget komplicerad och kräver en hel del administrativt arbete.Processen använder sig utav ett antal program för lagring och databaser så som,Lotus Notes, HiDraw Studio, och HiDra32.Avdelningen för kontroll och skydd är i fasen att övergå till ett annat elCADsystem, Engineering Base. Detta är också en av anledningarna att man önskar en nyprocess för revisionshantering.Arbetet bestod till en början av inlärning av den dåvarande processen.

The purpose of this study was to examine vitamin A and E in equine nutrition and especially in relation to forages. A literature review was conducted to examine factors that influence the level of vitamins present in forage, the vitamin A and E requirement of horses, and the absorption of vitamin A and E in horses. The influence of DM level on alpha-tocopherol and beta-carotene content in ensiled forage was investigated in a controlled ensiling study using baled silage and haylage. The results from the ensiling study were combined with data of vitamin A and E concentrations collected from literature. Calculations were done to theoretically establish how well the vitamin content in ensiled forage can cover the maintenance requirements of vitamin A and E in horses.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.