The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

The crucial factor for successful municipal climate work is that there are driving forces. Most importantly is that the senior officials and politicians in the municipality are dedicated to the cause considering that they have the power to influence and make a change. Besides proactive and committed individuals, it is necessary that the work is organized and anchored by clear and concrete documents and control systems. It is also important that the work is continuously monitored and evaluated. To collaborate with other municipalities, authorities or participate in various networks is another factor contributing to the improved climate work in the form of exchange of information, knowledge and experience.A major driving force for municipalities to improve themselves is the distribution of state aid and grants.

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

A change has occurred in terms of recruitment to teacher education. From having been an educationof high status and reputation, a reduced application rate has led to lower admission requirementsand thus that students with much lower educational qualifications entering, which in turn means thatthe education status and reputation have been reduced significantly. Mathematics, on the other hand,has always been a topic of high status and reputation. Although there are few students who chooseto study to be a mathematics teacher. By conducting a survey of students on teacher educationtoday, both with mathematics and other approaches, I wanted to get answers to my questions aboutwhat influences students' choice of education: who are the students studying to be teachers inmathematics? Do they distinguish themselves from the student teachers who studies to be teachersin other subject specializations? Pierre Bourdieu's sociological ideas about cultural capitaltransmitted from parent to child constitute the theoretical framework of the study.Early in the study, I noticed that there is a difference between students studying to be a teacher inpreschool, primary or middle school and them studying to be a teacher in secondary and highschool, especially in terms of the mathematics student teachers.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

The purpose of this essay is to examine the Swedish relations to Nato and by doing so see on what terms the cooperation is executed and why. However, Sweden is not a member of Nato and is thereby not seen as an ally of the organization but even so Sweden has a close cooperation with Nato. The theories used in this essay is The Rational Actor Model and The Organizational Behaviour Model by Graham Allison and Philip Zelikow. To this a number of additional theorises are used as to complement these two main theories. The aim with these theories is to see which one gives the most satisfying explanation of the Swedish strategy to cooperate with Nato and still not be a member of the alliance or if all theorises are needed.

Energy is an important issue in the current world which significantly affects sustainability and development. Energy generation and use are major sources of CO2 emissions which is one of the most important driving factors in global climate changes. The amount of energy used in house hold section can lead to estimation of the amount of CO2 emitted within this section which subsequently would be a ground to better management and maintaining a sustainable society. This study which is a bachelor?s project in sustainable energy, deals with estimation of CO2 emission from different types of residential houses in Sweden. An extensive literature review on energy use in Sweden by different residential sectors has been conducted.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

The aim of this Master?s thesis is to examine how the introducing of municipal library plans has influenced some compulsory schools in Malmö. I wanted to know if the library plan is a possible way to improve the quality of the school library. Through qualitative interviews with four school librarians and four headmasters, I investigate their knowledge of the library plan and their opinion of the possibilities to realize the directions of the plan. The theoretical framework is based on a model of organizational culture by Bakka, Fivelsdal and Lindkvist.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

Svenska Lantchips is a Swedish SME sized snack manufacturer. Being a small, medium sized, family-owned business with branches throughout the world, they make an interesting company for a case study. The case study I have conducted focuses on the internationalisation process of this family owned company ? how they, despite their size, find ways to keep up an unique business structure, designed for internationalisation.The aim of this essay is to compare Svenska Lantchips? internationalisation process with traditional internationalisation theories and see if these are compatible with this company. The theories used are The Uppsala Model, The Network Model, and The Born Global Theory, with The Born Global Theory representing the younger generation of models.After undertaking an in-depth interview with Michael Hansen, business developer at Svenska Lantchips, I collated a substantial amount of material, which I have used as the basis of this essay.