Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

This master thesis is developed based on the desire of the water and sewage department in the municipality of Karlskrona. The department, which vouches for the quality of produced drinking water and sewage cleaning, was in need of help dealing with risk analysis.The water and sewage department is obliged to identify and assess risks according to Swedish legislation. However, no guides for this purpose regarding safety, health, environment and quality were available. The aim of this report was to accomplish a guideline for the performance of risk analysis within water and sewage plants. If the guideline is used, the requirements in the legislation will be obtained.

AbstractMatchmaking on an organisational level? about co-operation between municipal introduction-units and voluntary organisationsEssay in Political Science D, by Rebecka Johansson, spring 2006The aim of this study is to examine co-operation between municipal introduction-units, which work to integrate newly arrived immigrants and refuges, and voluntary organisations in Sweden. The essay is a comparative case study which examines three local authorities and the main questions are;- Do voluntary organisations constitute a functioning co-operation partner to the municipal introduction-units? Are there conditions for future co-operation?The answer to the questions is that there are no, or rarely any, co-operation between voluntary organisations and municipal introduction-units. It is difficult to judge whether there are conditions for future co-operation.

The investigation was initiated because of the high workload of the sellers and, additionally, because the Tunadal sawmill has received low ratings in customer surveys. Thus,  two main approaches are adopted here,  the first being to investigate which of the three methods  of working, namely, market divided flow organization, function organizationand flow organization with collaboration, proves to be the most beneficial. The second is to investigate whether there is an available method to ease the daily work. A literature review has been made in order to determine more efficient ways for the sellers to work in the Tunadal sawmill. During the investigation, an in-depth investigation into the total quality management using a balanced scorecard as a management tool was conducted.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.

On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.

In todays competitive business climate the concept of ?quality management? is a significant part of daily work for many companies, as they want to achieve high performance quality and delivery success. Within the services sector third-party logistics companies play an increasingly central role when it comes to the goods that are being transported. These companies are presented with continuous challenges to ensure that goods are loaded on trucks efficiently and delivered on time, at the right place and in the right condition. The present case study was conducted in collaboration with Schenker AB and Schenker Åkeri in Jönköping, to help these two company branches serving under the same major corporation to solve a common problem they both encounter, namely the fact that it regularly occurs handling abnormalities in the terminal process that affects overall quality for customers.The study aims to find out how the daily quality control concerning the handling of goods in the terminal process can be improved hopefully resulting in a higher quality in cargo shipments.

This thesis examines how a company can get an effective, high quality, maintenance of their computerized systems. After literary studies concerning the life cycle activity Maintenance we have studied how the maintenance at the department IT Supply of IKEA IT AB in Älmhult is carried out. What steps and measures in the analyzing of results of changes are carried out and if they have predefined processes for changes. Based on the facts we found most important in our literary studies we have created a model and theoretically applied this to the maintenance of a specific system to see what they can work with to further improve the quality and efficiency in their maintenance. The basis for our thesis is literary studies and the collected material has been used as a foundation for the research at the company, which was carried out through interviews. This thesis is based on the question: ?How do the lack of a model for maintenance and the lack of orientation affect the maintenance in a company??.

ABSTRACTBackground: Children and adolescents growing up in families where parents have serious problems are exposed to an increased risk of developing poor mental or physical health themselves. In a support group work they can meet other children in the same situation, receive help and support to process their emotions and manage their everyday life.Aim: To investigate if support group work at Trappan can reduce the psychological problems load and increase the experience of life quality, hopefulness and optimism in children and adolescents growing up in families where either addiction or mental illness occur in one of the parents. The purpose was also to investigate if there was any difference between these both child groups regarding psychological problems load, experience of life quality, hopefulness and optimism before and after support group participation.Method: Questionnaire study on children and adolescents of parents with addiction or mental illness. The children participated in support group work at Trappan. The measuring?s were conducted before and after support group participation.Results: In both groups an increased life quality in connection to finished support group participation was observed.

The aim of this thesis was to describe the services offered to students with dyslexia, and from a service- and quality perspective describe how the consumers of these services experienced the supplied services. Dyslexia refers to certain problems with the written language. With the demand for students in higher education to accumulate much knowledge through reading, this becomes a question of vital importance. A qualitative descriptive approach was used, and a case study was conducted. The case study covered 'Student support' at the University of Borås and how dyslectic students at the university experienced the help from 'Student support'.

The purpose of this thesis is to describe property definition and special boundary demarcation and to analyze the differences between the two cadastral procedures. Property boundaries, especially unlawfully determined boundaries created through unofficial parcelling, can create conflicts between landowners and make it diffi-cult to know which land that a property contains of. It is possible to clarify the boundary conditions through a property definition or through a special boundary demarcation re-establish boundary marks.The methods used are: (1) A literature review to collect background information, (2) A case study to summarize court cases and (3) A questionnaire study to collect opinions from cadastral surveyors.The result is summarized in two comparisons. Firstly between restoration of landmark and special boundary demarcation (which replaced restoration of landmark in a legislative change in 2010), which demonstrated that the change in the law is considered positive because special boundary demarcation gives a legal effect on the boundaries. Secondly between property definition and special boundary demarcation which demonstrated that the two procedures are similar to each other.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

Background: Patients with leg ulcer suffers often of woundpain. Healthcare professionals will strive after having knowledge and understanding for how woundpain influences the patient's quality of life. Aim: The aim is to elucidate the patient's experiences of pain at venous leg ulcer and the effects on their daily life. Method: The procedure has been a systematic literature overview with a systematic search in different databases. The search resulted in nine scientific articles.