MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.

Workplace accidents in Sweden have in recent years increased. Companies are at the same time putting a greater emphasis on preventing accidents and inform about safety and risks. Therefore there is a need to know how to visualize this safety information. This study is based on a part of a project proposed by the industrial company AB Wahlquists Verkstäder, in which they want to visualize their safety information for new employees and existing staff, and also for temporary contractors and apprentices. The purpose of this study is to see what is required of the visualization of safety information and what guidelines that should be followed.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

This essay examines the using of consensus method for decision making within the World Council of Churches (WCC) and the process that led to the decision to adopt its usage. The main question of my essay is why the method was introduced to the WCC and what motives lay behind its introduction. Other questions are how the consensus method works; both in theory and in practice, and what the predecessors and Prototypes for the method are.The consensus method belongs to a broad Christian tradition of spiritual discernment and spiritual decision making. The New Testament, in particular Acts, gives examples of decision making in the early church which show that discerning God's will was considered essential. However the most influential model for the consensus method have been the decision making process of the Religious Society of Friends or Quakers, and also the consensus model of the Uniting Church in Australia.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

När företag ska utveckla produkter och tjänster behöver de informationsunderlag om kunder och användare. Traditionella marknadsundersökningar kräver ett rationellt förhållningssätt och avslöjar åsikter och attityder, men uppvisar brister när det kommer till att upptäcka omedvetna behov hos användare. Lösningen på denna problematik är att observera användare i deras egen kontext, ett tillvägagångssätt som är vanligt bland industridesigners.Syftet med studien var att jämföra hur industridesigners och marknadsförare arbetar för att samla in information om användare i samband med produkt- och tjänsteutveckling. Därefter syftade studien till att ställa dessa likheter och skillnader i kontrast till tre teorier: Marketing Research Process, Design Thinking samt Empathic Design. Tre intervjuer genomfördes med tre olika företag: ett industridesignföretag, ett marknadsundersökningsföretag samt ett tjänstedesignföretag.Studien resulterade i ett antal slutsatser.

The idea for the thesis ?Construction and implementation of a mobile prototype; The Lovebomb? originates from doctoral candidates Rebecca Hansson and Tobias Skog from PLAY Research Group at the Interactive Institute in Gothenburg. The object of the master thesis is to construct two working LoveBomb Prototypes, one mother console belonging to the LoveBomb and blueprints for both. The LoveBomb (the picture to the right shows a possible design) is intended to encourage people to express themselves emotionally when situated amongst strangers in public spaces. Two buttons control the device, which contains a radio transceiver.

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.

Den här rapporten redogör för utveckling, design och sömnadskonstruktion för en sadelpadd. Rapportens ämne valdes för att jag fann det intressant och har själv stort intresse för hästar och produktutveckling. Fokus på rapporten låg på att ta fram en fungerade prototyp som testades av hästägare för att se om en distansväv skulle klara av att vara det stötdämpande och tryckutjämnande materialet i en sadelpadd. Rapporten och utvecklingen av rapporten bygger på en enkätundersökning och några intervjuer med relevanta personer insatta i ämnena sadelpadd och ryggskador hos hästar. Utifrån den insamlade informationen från de intervjuade och de som svarade på enkäten samt tidgare skrivna källor gjordes en studie i hästars uppkomst av ryggbesvär.

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.