Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

iProspect is a global digital marketing agency and work primarily with search marketing. They were the first search engine marketing agency in the world when the company started up 1996 in Boston, Massachusetts, and the first in Sweden to offer services in search marketing after establishing themselves on the Swedish market the following year. iProspect can be found in the södermalm office in south central Stockholm. They are a comprehensive agency within search and offer everything from search engine optimization and sponsored links to advertising on social media. They?re goal is to lead developments in search marketing and to keep ahead of competition.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the Prototypes used in functionality tests to establish their feasibility.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

AbstractThis thesis was conducted by Jenny Jansson and Maria Madsen, students at the Faculty ofTechnology and Science and the Innovation and Design Engineer programme at KarlstadUniversity, during the spring 2008. The thesis covers 22,5hp for each student. AnnaHolmquist and Chandra Ahlsell at the company FOLKFORM were the ones who requestedthe theis, their company are located at Stora Skuggan in Stockholm. Tutor for this thesis wasLennar Wihk and the examiner was Monika Jakobsson of Karlstad University.The given assignment came from FOLKFORM and the aim for the thesis was to create afurther development of two already existing lamps from an earlier collection at FOLKFORM,?Jaipur? and ?Modern Times?.

The purpose of this thesis is to investigate how Digital Signage systems such as public info kiosks can be designed to better fulfill its main use; to enlighten, encourage and influence the public with information. The challenges presented from earlier studies shows that the public interests and goals, together with proper and relevant content displayed in info kiosks have impact on the attention the public have towards public displays. Qualitative methods such as interviews, usability testing and observations were conducted to further examine how a public info kiosk can be designed to draw attention and grow interest amongst students at K3, Malmo University. Usability testing were used on the digital Prototypes that were developed to ensure that the gestural user interface meet the requirements of a proper interaction from the users. Important insights were made concerning; the attention and interest to relevant content, the aspects of the gestural user interface along with the placement of the info kiosk in terms of context.

Denna studie är en fallstudie av ett privat sjukvårdsföretag. Studien syftar till att undersöka hur olika gestaltningsteknikersamt gruppers sammansättning kan påverka diskussioner kring design och därmed fungera som strukturerande resurser församtalet. Studien vidgar begreppet prototyper till att hantera mer än de delar som behandlats i tidigare forskning: medium,detaljrikedom och närhet till slutprodukt.Datainsamling har skett vid sex fokusgruppstillfällen där tre olika grupper (inom olika delar av en och samma organisation:användare hos kund, användare hos systemleverantören och systemutvecklare hos leverantören) har fört en diskussion kringdesignen utifrån tre olika gestaltningstekniker (gränssnittsskisser, scenarios och dynamiska datorprototyper).Diskussionerna har sedan analyserats i termer av domäner för interaktionsdesign och aspekter av IT-systemet i användning.Studiens huvudsakliga slutsatser är att gestaltningstekniker påverkar vilka domäner och aspekter som diskuteras varfördesignern kan välja gestaltningsteknik efter vad han eller hon vill få ut av diskussionen. Skisserna bedöms ge den mestheltäckande diskussionen, medan scenarios fungerar bäst för dem som inte är teknikvana och tar då upp struktur ochfunktion. Datorprototypen lämpar sig bäst för diskussion kring interaktion och presentation.

Organisations constantly live under the potential threat of events and accidents that seriously could harm the organisation. Forsmarks Kraftgrupp AB, the company that this master thesis focus on, is in no aspect excepted from this threat. Through an early identification of near misses and the taking of corrective action in use, Forsmarks Kraftgrupp AB has managed to reduce the likelihood and the consequence of events and accidents. The purpose of this master thesis is to evalutate Forsmarks Kraftgrupp AB?s operation experience process on the basis of IAEA?s and WANO?s requirements within the field of operation experience and to develop a usable system applicably within the field of operation experience.The thesis is divided into two parallel tracks, where one is the evaluation of the operation experience process and the other the design of a usable system, applicably within the field of operation experience.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.