The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard Protocol J1939.Important conclusions: The use of CAN Protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate Protocol project in a case study. Uppsala climate Protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

This essay describes a single case self-study of a music composer in order to track the compositional process in real time. In the study the subject and the researcher are the same person. The study builds on previous empirical studies that have used methodological approaches such as analysis of computer-based digital data collection, verbal Protocol and video observations. It deals with issues of the compositional process related to for example time consumption, number of artistic decisions, the different roles and skills of a music composer, and methods of research in the musical composition process. During three shifts the researcher worked as a music composer dealing with the issue of converting an audio sketch of a composition into a representative finished audio product.

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate Protocol project in a case study. Uppsala climate Protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

The purpose of this study was to compare normal electroretinographies (ERGs) from three different canine breeds in order to evaluate if there were any marked similarities or differences between these breeds as to ERG responses. It is known that healthy dogs from different breeds but also dogs within the same breed but in different age categories may have different appearances of their ERG responses. This may be a problem when evaluating if an ERG is normal or not from a dog within a breed not previously examined. Because of this it is important to obtain normal values for each breed and age group in order to be able to use these for later comparisons of ERGs obtained from individuals affected with various retinal diseases. In this study we have chosen to examine dogs within the three breeds: Labrador Retriever (LR), English Springer Spaniel (ESS) and Chinese Crested Dog (CCD). All of these breeds may be affected with hereditary retinal diseases such as Progressive Retinal Atrophy (PRA). It is possible that ERG-responses vary due to a number of different factors.

At Saab Aerosystems, situated in Linköping Sweden, there is a presentation and manoeuvre simulator simulating the fighter jet JAS-39 Gripen. This flight simulator is called PMSIM. In this thesis we study how to transfer sensor images generated by PMSIM to other simulators or desktop computers. The transmission is band-limited so some kind of image coding must be used. Because of this the greater part of this thesis is concerned with image coding.

AimThe aim of this study was to, through a systematic literature review of evidence based electromyographic (EMG) studies, identify specific exercises for rehabilitation of the Serratus Anterior muscle. The research questions were: ?Which exercises can be recommended to use to activate the Serratus Anterior?? and ?Are the recommended exercises altered between studies on individuals with and without shoulder dysfunction??. MethodThe method was a systematic literature review. First the study aim and research questions were formulated. A research Protocol was then formulated with inclusion and exclusion criteria and search terms.

Animal welfare is of increasing concern in present society. In commercial pig farming, animal welfare problems are common. One of the causes for these problems is the barren environment in which pigs are housed, which can cause oral manipulation of pen mates. Providing straw might be one solution to this problem. Another solution could be reached through genetic selection.

Denna rapport handlar om att använda en trådlös kommunikationsteknik som kallas NFC (Near Field Communication) vid kommunikation mellan en Android mobiltelefon och en NFC-läsare som kallas ACR122U. Syftet med detta projekt är att:Välja en Androidtelefon som har stöd för NFC.Skapa en applikation som skall köras på Androidtelefonen och som skall skicka ett lösenord via NFC.Skapa ett program som skall köras på en dator med operativsystemet Windows 7 och som skall hantera ACR122U.Förklara den insamlade kunskapen i detta dokument så andra lättare skall kunna arbeta med NFC.Följande frågor kommer att besvaras i denna rapport:Vilken Androidtelefon bör användas vid utveckling av en applikation som kan kommunicera via NFC?Vad krävs vid utveckling av en applikation som kan kommunicera via NFC?Aktionsforskning är den forskningsmetod som användes vid sökandet efter svar på frågorna ovan. Detta innebär att forskningen görs genom att läsa om ämnet, genomföra en eller flera lösningar för att hitta en fungerande lösning och sedan dokumentera resultaten. Implementeringen av programvaran på mobiltelefonen genomfördes med mycket hjälp från Android Developers hemsida.

IPv6 har, till skillnad från tidigare versioner av protokollet, inbyggt stöd för redundans hos gatewayenheter. Vid nyttjande av ett flertal gatewayenheter kan det, med hjälp av Neighbor Unreachability Detection, ske automatisk övergång till en ny gatewayenhet utifall att den aktiva skulle gå ur funktion. Innan IPv6 har man varit tvungen att förlita sig på externa lösningar för att uppnå denna redundans. Den huvudsakliga fråga som ställs i rapporten är om det inbyggda stödet för gatewayredundans i IPv6 är tillräckligt snabbt för att kunna nyttjas självständigt, utan att förlita sig på externa lösningar. För att kunna ta fram ett värde om vad som var ?tillräckligt snabbt? har vi, genom att läsa tidigare forskning om användares upplevelse av fördröjningar, kommit fram till att en fördröjning ej får överstiga tio sekunder.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A Protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

Tidigare studier visar att det finns skillnader mellan flickor och pojkar avseende hur de upplever ämnet matematik, vilket återspeglas i utbildnings- och yrkesval. Tidigare studier visar även att det finns skillnader mellan flickor och pojkar avseende hur de lär och tänker när de löser matematiska problem och attlärare inte alltidtar hänsyn till dessa skillnader. Denna studie syftar till att undersöka hur flickor och pojkar löser aritmetiska uppgifter genom kognitiva, kroppsliga och externa strategier samt likheter och skillnader mellan flickor och pojkar. Totalt har 23 barn (11 flickor och 12 pojkar) i grundskolans årskurs ett löst nio aritmetiska och fyra andra matematiska uppgifter. Barnen instruerades att tänka högt och blev videofilmade.

I januari 2011 delades de tva? sista fria IPv4-adressblocken ut av Internet Assigned Numbers Authority (IANA) till den asiatiska Internetregistratorn Apnic (Asia Pacific Network Information Centre). Detta inneba?r att adresserna som fanns i den centrala adresspoolen nu a?r slut. Registratorn hade anso?kt om dessa adressblock eftersom det ra?der akut brist pa? Internet Protocol version 4- (IPv4-adresser) i Asien samtidigt som Internetanva?ndarna i denna del av va?rlden o?kar explosionsartat (Magnusson, 2011a).

Denna rapport handlar om att använda en trådlös kommunikationsteknik som kallas NFC (Near Field Communication) vid kommunikation mellan en Android mobiltelefon och en NFC-läsare som kallas ACR122U. Syftet med detta projekt är att:Välja en Androidtelefon som har stöd för NFC.Skapa en applikation som skall köras på Androidtelefonen och som skall skicka ett lösenord via NFC.Skapa ett program som skall köras på en dator med operativsystemet Windows 7 och som skall hantera ACR122U.Förklara den insamlade kunskapen i detta dokument så andra lättare skall kunna arbeta med NFC.Följande frågor kommer att besvaras i denna rapport:Vilken Androidtelefon bör användas vid utveckling av en applikation som kan kommunicera via NFC?Vad krävs vid utveckling av en applikation som kan kommunicera via NFC?Aktionsforskning är den forskningsmetod som användes vid sökandet efter svar på frågorna ovan. Detta innebär att forskningen görs genom att läsa om ämnet, genomföra en eller flera lösningar för att hitta en fungerande lösning och sedan dokumentera resultaten. Implementeringen av programvaran på mobiltelefonen genomfördes med mycket hjälp från Android Developers hemsida.