This is the final documentation of the basis that can be the foundation of how to solve theproblem with leaking hydraulic oil in a shoe press at the company Albany InternationalAB in Halmstad, Sweden.The project has been performed at Halmstad University as a degree project commissionedby Albany International AB. The purpose of the degree project was to find a way ofdetecting the hydraulic leak of a shoe press. The reason is that the shoe press runsunattended during nights and weekends, this can cause an extensive decontaminationwork and production stop if leak. The hydraulic oil could be leaking in large amounts orslowly as a fine mist. The development of a working system that can detect a hydraulicoil leak and stop the machine before a large amount of hydraulic oil leaks out wouldconsiderably reduce the cost of the decontamination work.

Vi vill genom denna studie av revisionsbranschen öka förståelsen för hur organisationskontexten bidrar till det kunskapsintensiva företagets möjlighet att dra nytta av den kunskap som medarbetarna besitter genom intern kunskapsspridning, med fokus på en projektstruktur där arbetet utförs i team. Vi har utifrån teorier försökt definiera begreppet kunskap. Kunskapens vikt i företagets jakt på konkurrensfördelar har också rätts ut utifrån tillgängliga teorier. Vi har också redogjort för organisationsstrukturens, framförallt projektorganisationens, förmåga att underlätta kunskapsspridning och hur kommunikation och sammansättning av team bidrar till detta. Studien har utifrån kvalitativa, semistrukturerade intervjuer införskaffat empiri från företag inom den kunskapsintensiva branschen.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

This project has created a web-application for the service technicians at the paper plant Gruvön. The project was outsourced to the IT-company Sogeti.The application visualizes information about reparation-work of the equipment at the paper plant. The displayed information is work-orders, the status of the work-orders and errors. It is also possible to see the costs and hours spent on reparation-work.. The work-orders and related information is stored in a relational database.The application is created mainly for web-browsers in mobile-phones and tablets.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

With a starting point in a project for reinforcing small scale business among immigrants in Sweden, carried out within Swedish for immigrants (sfi), the aim for this thesis is to examine the project from the view and experiences of the participants. Interviews with participants in the project have been inspired by the teoretical and methodological views of Grounded Theory.The interviews show that some participants want to start their own business, but almost as many don?t have that dream. The former group all have experience of being self-employed. They are aware of the difficulties but are nevertheless determined to proceed their dream.

The purpose of this paper was to understand internal communication?s critical tradition by studying the interface of the subjective experience and the objective behavior within a management team. During almost two years this group was observed, several semi-structured interviews were conducted and a specific incident was analyzed. The interview texts where analyzed, using the Meaning Constitution Analysis developed by Roger Sages (2010) at Lund University. The observations were summarized in sociograms showing relationships in the organization.

This thesis has been conducted at Volvo Bussar ABunder a period of ten weeks. Within the organizationVolvo, the work is conducted with leaders and teamson every level; from production to top management.They have three tasks, besides executing their dailywork, they are expected to actively work on improvingtheir individual work as well as themselves as persons.The two latter are future value adding activities for theorganization. When doing so, however, it has beennoticed that they often lose the grasp of their dailywork. The question that consequently arises is whythis happens. Is it because of lack of time or it isbecause the co-workers do not have the competenceand simply do not know how they are to execute thethree tasks? Or, is it because the motivation to executethe three tasks is not enough? With this in regard, thestatement of issues for this bachelor thesis were thefollowing: how can the conditions for leaders and theteam be improved, in order for them to execute thesethree tasks.To find out why the execution of these threeassigments did not always succeed, the decision wastaken to conduct a survey and interview study in reallife and at the plants.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated Project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

The purpose of ?The Lake? was to create an experience with music and visuals working with no budget.A personal purpose was that I wanted to explore new areas in design, like scenography, and combine them with my previous knowledge and skills. My method was to keep my hands busy at all times and use new materials. I also wanted to work with other creators and learn from their methods. Together with a musician I created the music and the concept for the project.

This project practise methods used in the interaction design discipline to develop a concept related to the Swedish Guinness World Records Magazine. This project is a challenge to accommodate both the users? and client?s needs. We focus on interaction and the experience, which is acquired through the use itself, and how to connect it to a theme from a client. The aim of this project is to create a meeting place for children where they can interact with technology.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Internal communication is an important factor in organisations today. For many system development teams it?s critical that the communication works well. Without communication, success would be impossible. This study aims to highlight the effect communication has on the members of agile Project teams.

This is a thesis report from SLU in Skinnskatteberg, the Swedish university of agricultural sciences. This study is an evaluation of a course in attitudes and behavior for participants of the ETT- project led by Skogforsk, the forestry research institute of Sweden. They do research for the benefit of Swedish forestry. The ETT-project is a project where there are both 74 tons ST-trucks and 90 tons ETT-trucks in test on the public roads. This study is concentrated on the ST-trucks and their drivers, company owners and logistics managers. The evaluation is done by interviews with the various participants.