Internal communication is an important factor in organisations today. For many system development teams it?s critical that the communication works well. Without communication, success would be impossible. This study aims to highlight the effect communication has on the members of agile project teams.

This is a thesis report from SLU in Skinnskatteberg, the Swedish university of agricultural sciences. This study is an evaluation of a course in attitudes and behavior for participants of the ETT- project led by Skogforsk, the forestry research institute of Sweden. They do research for the benefit of Swedish forestry. The ETT-project is a project where there are both 74 tons ST-trucks and 90 tons ETT-trucks in test on the public roads. This study is concentrated on the ST-trucks and their drivers, company owners and logistics managers. The evaluation is done by interviews with the various participants.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The theme of this essay is literacy training in pre-school. The theme takes it starting point in a project, where my colleagues and I noticed our children playing with writing and symbols. It leads to an exciting, reflecting and developing project, a project that will go on for six months together with twenty children in the age of five and six.The essay describes how I and the rest of the staff work with the project, and also how we try to find challenges that are meaningful for our children. When we worked with the project I ended up in a dilemma how I as a teacher was to retain the children?s joy and curiosity for writing without making it boring.

During the last decade of the twentieth century both ?manhood? and gender studies seems to have undergone changes. With the field of masculinity and the critical studies of men, added as ?subsections? of broader gender studies, new knowledge has been produced to better grasp the production of gender and power relations of patriarchy. During the same decade as the ?metrosexual? first appeared of the urban stage, acts of homophobia and attitudes towards ?manhood? seems to have changed.

This report is the result of a sub-project of a larger project to create a platform formathematical education. The sub-project focuses on authentication with associ-ated security, where security is emphasized. The project environment is Java EE 6where GlassFish 4.0 acts as the server. The project has been divided into threeparts; password encryption, Java EE authentication and brute force attack. Thepassword encryption part focuses on examining different hash functions executionspeed, the result shows that none of the examined hash algorithms is suitable fordirect use.

How can a vacuum cleaner motivate you to use it? From a sustainability perspective,the author asked the question of how such a solution would looklike? These where issues that the project tackled and devised solutions for. Theproject wanted to explore the physical modeling and a large part of the finalresult consisted of a full scale model. The project found that the problem ofvacuuming largely consisted of the problem of storage the product. The projectfound that the motivation for the job, therefore, could be resolved by a betterdesigned vacuum cleaner with a built-in hose, folding handles, which couldbe stored integrated within the vacuum cleaner.

 Abstract This paper is to examine a specific integration projects by the name of SFINX, the participants' perspective. We chose to highlight three themes that concern the analysis what the participants thought about the content / efficacy, effectiveness and efficiency analysis, which means what the participants thought could be improved in the project. What emerged in our study is that research shows that Swedish education with professional orientation and integrated practice is a key factor for migrants to get into the Swedish labor market. And that Sfx teaching has been implemented in several places with good results. SFINX is also a Sfx project but is addressed to engineers.

Syfte med detta arbete är att skapa förståelse för gymnasieskolans utbildningsinnehåll på Hotell och Restaurangprogrammet respektive Livsmedelsprogrammet i relation till arbetslivets utveckling och utbildningsbehov. Genom en kartläggning av berörda branschers uppfattning om elevernas utbildningsbehov vill vi undersöka om det finns behov av att utveckla nytt specialutformat program med inriktning mot ?Butik och Cateringkock?. Metod Vi har genomfört en kvalitativ studie, där vi gjort intervjuer med berörda branscher. Där söker vi svar på frågan om utbildningsinnehållet på gymnasieskolans ?Hotell och Restaurang program? och ?Livsmedelsprogram? motsvarar arbetslivets utveckling och framtida krav på utbildningsbehov. Resultat Resultatet inleds med en övergripande introduktion som handlar om förändrade mattrender och livsstilar i dagens samhälle.

This report is a result of a degree thesis at Luleå University of Technology together with Stram AB in Växjö. The project aimed to develop a size reducible bed, that gets small when folded and has a new slim design. The development of the new folding bed had the purpose to give Stram AB new ideas of how guest beds can look like and be used in the future. Information about Stram´s products and also information of other similar products on the market was gathered. A visit at a store, internet and interviews gave grater insight of the market, and of customer needs.

Problem: How does project managing appear in small IT-consulting companies and how does the project manager carry out their projects to create successful solutions for their customers?Purpose: The research has the purpose to analyze and review how IT-consults in small companies work and lead their projects to create profitability for the company, which leads to a good development for the company.  Methodology: The research is made on eight research objects in IT-consulting business and the sizes of them are between 1-49 employees. The research is made with a qualitative method to get closer to the research objects. Therefore the research is made in forms of interviews. The analysis is grounded on a comparison between the research data and the theories that are used in the research.Theoretical perspectives: The theories which have been used in the research are Involvement theory (Fill, 1999), PAFF-metoden (Marcusson & Ahlin, 2002), Projektledning (Tonnquist, 2006), Jakten på det effektiva projektet (Engwall, 1999) och Mervärde (Grönroos, 2002)Empirical foundation: The research data are founded from the interviews of the eight research objects, they have the fictive names: Gondor, Minas Morgul, Minas Tirith, Mordor, Osgiliath, Rivendell, Rohan and The Shire. Analysis/Result: Each study object starts their projects with a pre-study phase, as the PAFF-method describes it.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

?Optimizing the workflow of hydraulic reservoir tanks? is a degree project made by Jonas Olsson, student within the faculty of technology and science, during spring semester 2012. The project comprise 22,5 ECTS.Volvo Construction Equipment, located in Arvika, was the client in this project. The mentor at Volvo CE was A?sa Barck, and the mentor at Karlstad University was Monica Jakobsson.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.