Peat litter is a soft material with high absorbency. About hundred years ago many farmers in Sweden used peat litter to their dairy cows. After the World War II the use of peat litter decreased and the farmers used more straw. Nowadays (year 2007), when it is harder to find straw and sawdust to buy, peat litter is advancing again. The purpose with this study is to investigate peat as a litter to dairy cows.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

Syftet med studien var att beskriva och jämföra tandvårdsrädsla och attityder till tandhygienist vid studiens start samt 3 månader efter icke kirurgisk parodontalbehandling hos patienter med kronisk parodontit samt att beskriva hur olika bakgrundsfaktorer påverkar tandvårdsrädsla och attityder till tandhygienist. Ett ytterligare syfte var att studera sambandet mellan attityder till tandhygienist och tandvårdsrädsla. Studien var en jämförande studie med kvantitativ ansats och en del i en större experimentell studie med två aktiva interventioner för att påverka munhygienbeteende. Studien innefattade 109 studiedeltagare, 57 kvinnor och 52 män i åldrarna 25-65 år som var remitterade till specialistklinik för parodontologi. Frågeformuläret som användes gällande tandvårdsrädsla var Dental Anxiety Scale (DAS) med 4 påståenden avseende upplevelser för att besöka tandhygienist.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

One purpose of our study was to investigate if equality in work time and parental leave in a relationship affect the time that parents spend with their children. Our first hypothesis was that increased equality in work time and parental leave leads to a reduction of the parents? total time with their children, ie the children spend more hours in pre-school and begin pre-school earlier. In order to test our hypothesis, we investigated the relationship between the woman?s and the man?s work time and parental leave and the time that the children spend in pre-school as well as at what age they began pre-school by using two surveys.Our study showed a significant coherence between both working women?s work time and the children?s time in pre-school as well as women?s parental leave and the children?s age at start in pre-school.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Den svenska skogsindustrin står inför en rad utmaningar inom den närmaste framtiden. Bioteknik anses kunna skapa en rad konkurrensfördelar åt svenska skogsindustriföretag för att möta dessa utmaningar. I denna kandidatuppsats jämförs de två företagsformerna start-up företag och storföretag för att undersöka i vilken organisationsform som bioteknik har störst sannolikhet att lyckas kommersialiseras inom. Företagsformerna jämförs genom att studera tre dimensioner, vilka uppfattats som särskilt viktiga i det teoretiska ramverk som sammanställts i uppsatsen: betydelsen av entreprenören, kunskapen och teknologin. Resultatet visar att den viktigaste förutsättningen för en lyckad innovationsprocess är en entreprenör som har en stor drivkraft och vision, samt en stor villighet att ta risker.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

Cross-suckling, i.e. when an offspring nurses a female other than their own mother, occurs in pig production systems where sows are group housed during lactation. As production systems where several sows and their litters are housed together during lactation are getting more common, the need of knowledge regarding cross-suckling increases. The overall aims with this thesis was to investigate how sow behaviour and productivity are associated with the occurrence of cross-suckling, and to investigate consistency in sow nursing behaviour related to cross-suckling. The study included information about the first 4 parities of 40 LxY sows kept in outdoor and indoor production environments. Sows were single housed the first 2 weeks after farrowing and group housed (4 or 5 sows per group) from 2 weeks after farrowing until weaning, 7 weeks after farrowing.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.