There are several factors influencing the profitability of production with sheep. Two of the most important factors are ewe fertility and lamb survival. Also growth capacity of the lambs is important. This paper aims to review correlations between the ewe?s fertility and maternal behavior and lamb survival.

In 2005, Outokumpu began to implement its system of continuous improvement, OK> 1, at Avesta Jernverk. OK> 1 has not generated sufficient results on plant KPI:s. The purpose of this study is to identify the understanding,  participation and commitment regarding to OK> 1, and to suggest some actions to make OK> 1 more successful with emphasis on these three aspects. The thesis shall also determine whether there are any differences in the attitude towards OK>1 between Blue Collars and White Collars.The study consisted of a survey, and interviews. The output from these methods were processed and analyzed and finally resulted in a SWOT ? analysis and suggested actions for improving the understanding, participation and commitment towards OK>1.

All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

This project is a learning CD-ROM production aimed at first-time parents. It is using both sound and images, moving as well as non-moving. The purpose of the production is to be an interesting alternative to traditional books. We have been looking at similar productions like drivers license educational CD-ROMs and encyclopedias for inspiration and ideas on how to proceed. In order to give the content some dynamics, we've also added the element of 3D-animated sequences. The application is supposed to be run as a simple executable file with flash embedded.

This master thesis is about the production of the record ?Brutus? with the band ?Trilobit?. Trilobit consists of the three musicians, myself, Stina Hellberg Agback on pedal harp, Simon Sva?rd on guitar and Karl Jansson on drums.During the production, I have analyzed different aspects of my own musicality and also the role of the pedal harp in jazz. I have found techniques that have simplified chromatic movements on the pedal harp, and also techniques that has developed the rhythmical aspect of my improvisation.I have also looked into my process in improvising and composing and developed new aspects, many thanks to the close collaboration with Simon Sva?rd..

In Kenya the Maasai pastoralists have based their livelihoods on dairy production and the production goal is to maintain a sufficient milk supply throughout the year. The pastoral dairy production has two vital characteristics; breeding and milking. Traditionally, breeding is the men?s responsibility, while milking is the duty of women. Depending on this partition of chores between men and women, they also have different management routines, ambitions and strategies regarding the milk production.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

The purpose of this study is to examine which factors played an important role in the food price crisis of 2007-2008. Theories used are Microeconomic theory, explaining changes in supply and demand, and Macroeconomic theory, explaining the impact of changes in exchange rate on prices. A theory regarding speculation is also used to explain the impact of speculative activities effects on price. The method used is multiple regression analysis in order to determine the effects which ethanol production, oil price and dollar exchange rate had on the surge in the price of corn, rice and wheat.The data used is in monthly observations during the period 2005-2008. However, other factors are taken into consideration during the study, such as production quantity, stock size, economic growth, speculative activity and population growth.

 This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.

I robotikkursen Autonoma Mekatroniska System på Halmstad Högskola finns ett problem som kan uppstå vid bygget av deras hjulförsedda mobila robotar. Studenter har en tendens att bygga roboten så att den körs med maximal effekt från start till inbromsning. Detta medför att vid test av deras robotar så slits motorerna ut fortare vilket ger en onödig kostnad. För att minska på kostnaden är målet med detta projekt att bygga och reglera en sådan robot med hjälp av en banplanerare. Banplaneraren skapar mjuka övergångar vid start och inbromsning av roboten vilket gör att motorerna inte slits ut lika fort.I detta projekt ska vi utveckla en robot som kan användas som ett pedagogiskt undervisningsmaterial.

Healthy calves are the foundation in order to run a profitable diary production. Being healthy as calf results in a better start in life and good growth is expected to follow. Within dairy production it becomes more common to rear calves in groups and feed them by an automatic milk feeder. The milk feeder enables for the calves in greater extent to ingest milk or milk replacer several times per day and they are also able to perform natural behaviors in greater extent. Group rearing of calves puts higher demands on the animal keepers to localize individual calves in the group pen, showing signs of illness.

Abstract This report is our bachelor thesis. Our work has taken place at a galvanising company in Sölvesborg. The company faced major changes, of which one was a computerisation process. The new system could involve changes in work practice and in specific tasks, affecting the workers. If the coming system was to support work, from the production personnel?s perspective, we felt a legitimate participation in the development and design of the future work practice, was a requirement that was not met. During our ethnographical studies we noted that conflicts arose between production and administrative -personnel.

Game fields are one way to divert animals away from sensitive areas, create shelter and forage, and also to increase the biological diversity. In this study I investigated how the plant composition in six different crop mixes used for game fields affected the biomass production, biomass consumption and biological diversity at the Koberg estate in southwestern Sweden. Six experimental fields were used and each field contained six plots, approximately 1500 m2 each, that was sown with a different crop mix. The crop mixes ranged from a pure grass mix (A), 70 % grass and 30 % leguminous plants (B), 53 % grass, 21 % leguminous plants and 26 % other herbs (C), 100 % leguminous plants (D) to the most complex mixes constituting of 91 % leguminous plants and 9 % other herbs (E) and 87 % leguminous plants and 13 % other herbs (F). The fields were cut weekly during the summer in 2010, to estimate weekly biomass production.

This literature review examines different forages which are well suited for suckle cow production in Sweden today. They should also be possible to cultivate in Sweden under the current circumstances. Crops suitable for grazing in Swedish climate but not used in Sweden today, but which may be relevant for Swedish conditions are also mentioned. In Sweden today, mainly grass silage, straw and hay are used as forage, but also wholecrop silage is used to some extent. However, concentrates are not used to a greater extent, since it contains too much energy.