This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

In the middle of the 19th century was Calluna heath the major nature type in Halland, but the remaining parts today is only 1 500 hectares which is a 99 % decrease of the Calluna heath mainly due to an increase in forest plantations and arable fields. I have made a quantitative study how the Calluna heath of Grönabur & Sandsjöbacka has changed between 1841 and 2005 and why it didn?t disappear in the same manner, as it did in other parts of Halland. The studying of original sources as historical maps, literature and by doing field visits has been significant for the final result. The main reason for the different development of the Calluna heath in the investigation area (69 % decrease), compare to elsewhere in Halland, is the establishment and management of a nature reserve..

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

The product structure of the fuel tank installation is one of the most complex product areas at Scania. Caused by the number of parameters, which affect the fuel tank installation, a product structure is created which is very difficult to handle. Knowledge exist that the structure in a nearby future will be considerable more complex. The purpose of the study has been to understand in why this complexity exist and find ways to break the trend of a growing product structure. The goal was to achieve a more standardized fuel tank installation.A theoretical study was performed in order to bring knowledge in relevant areas both in general theory but also in documentation at Scania.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Thesis purpose: The purpose of this thesis is to make a contribution, by connecting the transfer of meaning within the context of TV series. The meaning is transferred from the brand to the character in a TV series and then further to the viewer. To look at different role functions that are used in dramaturgy and narrative techniques, we will be able to see how the brand will have a specific role and thereby make the transfer of meaning more successful and effective. This role will have an important impact on product placement according to the meaning that will be transferred from the brand to the viewer, through the character. Methodology: By looking at the transfer of meaning process that is created from the brand, an unstructured observation is applied where we observed the placement and usage of different within a specific TV series. Qualitative strategy is conducted by using a case study.

This thesis is concerning private brands on special display. ICA Gott Liv! was used as a study object and a latin square design was employed, using 2 ICA Kvantum stores. Two displays were built in order to compare which created the most awareness and interest, one with the best selling Gott Liv! product and one with four randomly chosen Gott Liv! products. The data was collected using triangulation, questionnaires, sales data and observations were conducted in the two stores. The results indicated that private brands works as well as manufacturer brands on special display and a display with four randomly chosen products creates more interest and higher sales than the display with the best selling product..

Produktnedläggning är ett sätt för företag att få bort produkter som inte presterar tillfredsställande. Tidigare studier har visat att företag med ordentliga rutiner kring produktavveckling har kunnat tillgodogöra sig flera fördelar i form av bland annat bättre lönsamhet och försäljning. Ändå har forskning visat att de flesta företag inte har några formella rutiner för nedläggning av produkter och att produktnedläggning inte ses som lika viktigt som andra produktaktiviteter. Av den anledningen studeras i denna uppsats hur väl utvecklade rutiner två utvalda företag har för avveckling av produkter.Syftet med uppsatsen är att undersöka hur två utvalda företags rutiner för produktnedläggning ser ut. Resultaten jämförs sedan med den teoretiska referensramen samt mellan företagen i fråga för att urskilja likheter och olikheter.Till denna uppsats har en kvalitativ metod använts för att klargöra hur företag går tillväga vid nedläggning av produkter. Genom intervjuer med AB Karl Hedin och Spendrups Bryggeri AB har empirisk data samlats in för att möjliggöra jämförelser företagen emellan samt med den teori som sammanställts.    De två studerade företagen har helt skilda förfaranden kring produktavvecklingar.

This paper quantitatively examines the effects of marketing brands within the same product category and the same brand portfolio jointly. We have chosen to call this type of marketing category advertising. The results of the study show that category advertising leads to increased brand awareness within the category, which is particularly important for brands within less salient subcategories. For strong brands however, category advertising leads to lower purchase intentions, an effect which could potentially be moderated by focusing the advertisement on the complementary nature of the products combined with promotional elements. The study also shows that there is no difference between advertising products jointly and separately when it comes to brand attitude, category attitude, typicality, brand purchase intention for weak brands and category purchase intention.

The competition amongst companies is getting tougher and the economic markets are getting even bigger with new products and businesses. One way for companies to differentiate themselves from the competitors is through packaging design. If the merchandise is to send a reliable and solid message to consumers, the attributes of the packaging must be consistent and uniform. If the different attributes are not coherent, the message loses credibility towards the consumer. Through the sent messages, the pack signals the products? expected quality and price.This paper includes two studies, in which the main objective is to discover and build understanding about Swedish consumers? perception of a product?s price depending on the pack?s design.

In this essay I examine how a municipal- and an independent upper secondary school compare to the ideal types the Company and the Political organization and how that affects the school practise as it?s described in policy documents. The conclusions are that the municipal school on a number of variables correlate to the ideal type the Political organization. At the same time the school reforms of the 1990s are considered as an intention to ?companylize? the municipal school and a number of tendencies how that have affected the municipal school are shown.

Författarna har haft ett samarbete med Panduro Hobby i samband med deras årliga miljökampanj. Syftet med examensarbetet har varit att med hjälp av befintliga produktutvecklingsprocesser och livscykelanalyser (LCA) ta fram en hållbar textil produkt med växtfärgning. Tanken var att konsumenter sedan själva skall kunna ta fram och växtfärga denna hållbara textilprodukt. Miljömedvetenhet och hållbarhet inom textilindustrin är ett aktuellt ämne. Trots det saknar dagens konsumenter förståelse för textilindustrins påverkan på miljön och har bristande kunskap om textila material för att kunna göra miljövänliga val ute i handeln.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

Today's communication solution between the vehicle and trailer is one many see as anon-viable solution, then breakdowns on both the lights and cables are common. Now, anew innovation enters the market, a system that can transmit wireless control signalsbetween the vehicle and trailer.Parvus and Zap, the two solutions that the projekt group has come up with during thisthesis work carried out over the last year on Utvecklingsingenjörsprogrammet.Technologists Peter Jägevall and Christopher Åberg has developed this project on theirown. The group has developed various concepts and chosen to work on, two of them.The project has resulted in this report and a prototypeThe solution that the group has developed is a wireless communication between vehicleand trailer. The project team has developed new power-efficient LED lighting fixtures inorder to implement an internal power source in the trailer. The result of this has becomea maintenance-free and wireless product to trailers.