In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

Launching and marketing a health food product is associated with larger problems than a launch of a traditional food product. There are several sales channels that can be used for a health food product, for example the product can be sold as a traditional food product, natural health food product or as a prescription drug. A smaller company can however experience problems while launching its product as a prescription drug because of the large costs associated with this particular sales channel. There is often no other alternative than to launch the product as a traditional food product, this can however create other problems because of the existing regulations on what can and cannot be mentioned in the marketing of a health food product. The limited amount of information about the product that can be enclosed together with it makes it hard for a company to differentiate and position it on the market.

The management of information is one of the key aspects within a successful andefficient product development process, particularly regarding complex products.Scania CV AB is at the moment developing a new IT-system, OAS, which aims tomanage the company?s product data. With this as a background, the purpose of thismaster thesis is to identify the cross-functional user needs within Scania?s organizationconcerning product data and the management around it.To fulfill the purpose, an empirical study consisting of 40 personal interviews with 50representatives from different functions within Scania?s organization was carriedthrough. The empirical data was then analyzed focusing on identifying thecross-functional needs and issues.The study points out that there is a big potential regarding improvement among themanagement of product data.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

Studies show that activity based costing (ABC) is not widespread in practice even though it has been present in the academic world since the 80's. This thesis examines the reasons for the discrepancy between theory and practice through a case study of a Swedish manufacturing company. The intension is to answer the question of what contributes to the choice of precision in product costing.We found arguments for increasing precision in product costing but not to the extent of a full-scale ABC implementation. The company's estimation of the value of increased precision. In the study three company unique factors were isolated that affected the company's estimation of value; drifting purpose of product costing, historical use of product costing and knowledge about product costing..

Purpose: The purpose of our thesis is to analyze the application of models from product branding on job-seeking business students as a way to establish a personal brand.Conclude: We found that the principles of product branding closely resembles those of personal branding and are therefore applicable. The models that build a products brand can do the same for a business student. Thereby we can conclude that personal branding does derive from product branding..

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

This report describes the development of a high-voltage connector at the request of Scandinova Systems AB in Uppsala. The development process is described from the making of a customer demand specification, to the making of drawings for the manufacturing of prototypes. Scandinova develops high-voltage modulators, hence the need for connectors that can handle very large power pulses. Their current connector has several weaknesses that may cause the connector to melt or catch fire. The development began with a number of studies that included the modulator structure and the current connector structure and functions.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Abstract Title: A conjoint analysis of packaging attributes. How can the attributes of a product?s packaging best look like to attract the consumer? Authors: Linda Granberg & Helena Niklasson Supervisor: Jan Svanberg Department: School of Management, Blekinge Institute of Technology Course: Bachelor?s thesis in Business Administration, 15 credits Purpose: The purpose is to find out how visual and technical attributes on product packaging affects the consumers tendency to want to buy the product. Method: Conjoint analysis and a quantitative survey. Results: When developing a package for a food product we?ve reached the conclusion that it is most important to have clear product information on it. The consumer wants it to be simple and easy to use, the people under time pressure seeks product with new technology which can save them time..

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

The gaming market is growing and the number of people, men and women, who play computer games, is also increasing every day. In addition, computer games are also interactive media which leads to the fact that product placement in computer games attracts and is used more frequently by marketers. It is therefore important for marketers and game developers to understand how product placement in computer games affects players' attention and attitude towards the brand or product that is product placed. We therefore examine how product placement in computer games affects players' recall of and attitude towards the brand. The aim is to help companies and game developers to see the effect of product placement in computer games on players and thus product place more efficiently.