Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

The importance of internal communication within companies has increased in recent years. However, there are still a number of companies that are not adapted to the modern world and the new modes of communication the Internet provides. This study evaluates the internal communication of a medium sized company by holding semistructured interviews with the employees. The goal of the interviews was to develop a requirement specification. This requirement specification was later used as the basis to analyze possible aids for the internal communication of the company.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

Modern IT systems tend to become more and more complex, while the number of active systems in companies increases. Furthermore, the number of security-related incidents is at an all-time high. These new conditions impose new demands on organizations. For example, it is no longer possible to manually collect and examine the systems log messages.The purpose of this thesis has been to make a comprehensive study of solutions for automated collecting and managing of log messages, analyze the Swedish Armed Forces specification for solutions for central log collection and management, and evaluating exis- ting solutions. The work consisted primarily of literature studies and evaluations of two of the Swedish Armed Forces of selected products: NetIQ Security Manager and Splunk.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

Product development is essential for all companies that want to survive in competitive markets regardless of the characteristics of the product that the company sells. Companies that sell products within product categories which can be seen as bad, also need to develop their products in order to remain competitive. If these bad products add a positive attribute, for example that they get organic, a contradiction within the product arises and they get incongruent. This thesis investigates which effects that follow a launch of an incongruent product. The thesis also examines if these effects are affected by the strength of the brand under which the product is launched.A total of 240 respondents participated in an experimental study where product incongruity was manipulated for two different product categories, where one well known brand and one unknown brand were examined in each category.

This study investigates whether creative online product exposure within the clothing industry has a positive effect on the behaviour and attitude of today's consumers. Product exposure is the most important stimulus in the online marketing universe, yet few studies exist on this topic. Thus, this study pioneers in this specific research field. Through empirical analysis this study reveals that product exposure has a significant and direct effect on the perceived corporate ability and consumer involvement. Moreover creative product exposure indirectly increases the perceived product quality, intention to buy and the overall attitude towards the brand.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

The PhonePages of Sweden is a company that develops software for mobile units, especially cell phones. This thesis treats the development of, and contingencies for, a mobile phone directory, using the limited resources found in a mobile unit. The project was implemented and executed at The PhonePages with the intention of creating a product to sell to a third party.By studying different solutions, their benefits and drawbacks, an abstract picture of the product was constructed. Problems covered include compatibility problems caused by todays platform diversity as well as problems with saving, organizing and presenting data.The main goal was to create a phone directory which does not make external information retrievals. The service should contain both company and personal information, with name and phonenumber.

This thesis was conducted at SverigeGrepen in Vänge-Körlinge, Uppsala, Sweden.SverigeGrepen is a family business that develops and manufactures a few different parts of different kinds of products. My task is to come up with a good idea that facilitates the coupling of trailers, i.e. from an idea to a fully functioning prototype. The product is intended for use by all customers for all kinds of trailers. The actual goal of the work is to develop a full prototype that you can install and use in the easiest way possible, a prototype that follows the specifications.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .