This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

This paper is an assessment of whether the Nordic countries constitute an optimum currency area (OCA) or not. Hodrick Prescott-­?filtered data of real Gross Domestic Product (GDP) and rate of employment are used to investigate the similarity of business cycles between the target countries through a series of correlation analysis with Sweden as the base reference country and also by using a linear regression model. Additionally there is an evaluation of trade volume and labour mobility between the countries. Our results indicate that Iceland had the least similar business cycles within the Nordic countries and that the area should therefore possibly comprise Denmark, Finland, Norway and Sweden. .

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

The Swedish consumption of lamb a increasing, and today we yearly eat a kilo of lamb per person each year. As a consequence the Swedish degree of self production according to lamb is steadily decreasing, and is today about 39 %.Today Swedish Meats is now cooperating with the Swedish lamb breeders organisation to raise that percentage. At the same time the European Union presents a new agricultural reform, the MTR (Mid Term Review). The shape of this new reform is not yet fully known, but the general policy has been more or less outlined. The new reform is split into three propositions: the farm model, the regional model and the mixed model.

Syftet med vår uppsats var att med hjälp av Model Confidence Set (MCS) finna de bättre presterande modellerna bland de mest ?kända? och undervisade volatilitetsmodellerna. Vidare har vi även rankat dessa modeller inbördes. Eftersom prognoser om volatiliteten är mycket viktigt vid prissättningen på derivat, i detta fall ett räntederivat, är ämnet ständigt intressant. Med Model Confidence Set fann vi ett set av bättre presterande modeller utifrån vårt urval av ursprungliga modeller.

There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

This study is about how a swedish brand within the food industry that experiences a crisis following a product failure. It focuses on three areas following the crisis and these are crisis management, recovery strategies and brand management. This study seeks to explain how these areas interact in relation to massive exposure to mass media and how they interact restore the brand's potential loss of reputation. This study was conducted as a case study with a deductive and qualitative approach. The data gathered to this study was mainly based on newspaper articles and complemented with semi-structured interviews with twelve local retailers of the brand..

ABSTRACT Infertility is a medical condition that affects approximately 16 % of Swedish couples in childbearing age and is a condition found in both men and women. When a couple has been trying to conceive for more than 12 months without success they need to see a health care provider. Infertility can be treated with medicine, insemination or assisted reproductive technology such as in-vitro fertilization (IVF) and intra-cytoplasmic sperm injection (ICSI). The aim of this study was to validate a morphokinetic selection model, KIDScore? D3 Basic, against morphological selection model that is currently in use at the Fertility unit at University hospital in Orebro.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.