The purpose of our study is to interpret and understand the collaborative process around a regional model that is based on state developed guidelines for people with dementia. We have chosen to focus on the importance of interaction and have therefore interviewed participants in the project's steering committee. This group participates in efforts to develop a model for dementia care in Halland.The project work in Halland, to develop a joint model for people with dementia and their families was initiated in the spring of 2011 and is due to finish at the end of 2012. The Halland model has been named ?Annas led? and is about Anna and her husband Lars and living with dementia.

In recent years the liberal representative democracy has been subject of a substantial critique because of its inability to accommodate difference and createa genuinely democratic political process. One such critique comes from the theory of deliberative democracy. Supporters of deliberative democracy try to promote a model of democracy that take its vantage point in free and equal deliberationbetween all relevant actors in a political community. This model has with some success opposed the aggregative model of democracy, and in important ways turned the attention to the potential of deliberative processes.However, the deliberative model is still somewhat underdeveloped when it comes to issues of diversity and difference. This essay deals with such deficiencies by analysing deliberative democracy in the light of the critiquelaunched by difference- and radical democrats.

This thesis explores the position of book blogs in the literary system through Robert Escarpit's socio-literary model of the book market. Simultaneously the thesis serves as a test for Escarpit's theory: by actively applying his theory and model to a very new and contemporary actor on the book market I hoped to reach or confirm new insights into the usefulness and validity of Escarpit's work for contemporary socio-literary studies.Three book blogs were selected for the analysis and interviews were carried out with the authors. The interview questions were formulated specifically for the purpose of extracting the kind of information necessary for an analysis using Escarpit?s theory. As a complement to the interviews, statistics on the type of books reviewed on the blogs were also compiled.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

The purpose of this essay is to try to understand the relationship between the structures of modern working life and the development of burnout. By using the method of qualitative interviews we wanted to see if the Effort-Reward Imbalance Model could be applied to the data we had collected. Two questions have been highlighted in our research:        ? Is it possible to establish a relationship between the structures of modern working life and the development of burnout among the subjects interviewed?  ? Is it possible to explain the development of burnout among our interviewed subjects through the Effort-Reward Imbalance Model?    Our theoretical frames are the general theories of the modern society and the modern working life as developed by Anthony Giddens, Ulrich Beck and Zygmunt Bauman. We have also used Johannes Siegrist?s medical-sociological Effort-Reward Imbalance Model (ERI-Model).

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.

Purpose: The aim of this thesis is to examine how word of mouth and buzz marketing affects Uppsala´s businessstudents attitudes towards Red Bull. To solve this purpose we intend to answer some underlying questions.Theory: We have used relevant theories within word of mouth, buzz marketing and consumer behaviour. Our thesis will bring up the essential parts within these three different theories that we believe are relevant to our purpose.Method: In this thesis we have used both quantitative and qualitative methods such as interviews and questionnaires. The questionnaires will be handed out at Economicum at Uppsala University.Empirical study: This part is based on our questionnaires handed out to business students at Economicum, but also on our interviews made with employees working for Red Bull.Conclusion: Our empirical study has given us a clear picture of how Red Bull works and use marketing tools to promote their product. Through our questionnaires we have also found out what attitudes consumers has against the brand and the product.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The purpose of this report is to create and develop a model that streamlines and helps the innovationprocess of an idea owner and also in the development of ideas.This model should be able to apply for workshops and in innovation advice or business devlopment. I used the qualitative method in my essay just to get a maximum clear data collection, where the seven respondents were included in the interviews. However, much of the information retrieved from the theory books and research/science articles, in order to answer the research/Sceince question in the best possible way.

ABORT ?n GO is a design project within the crossing boundaries of Critical Design and IndustrialDesign.The contemporary discourse on abortion is problematic, and infected by double norms. Thesenorms may cause feelings of guilt and shame in women who have an abortion. The abortion rightis built upon conflicting standpoints; one is that women have right to have an abortion, withoutbeing questioned. Second is the notion that abortion is something that should be avoided, implyingthat you?ve done something wrong if you have had an abortion.With this project and physical product I want to explore and discuss the contemporary discourseon abortion in Sweden.

With this master thesis we wanted to find out in which way the concept of public service is connected to different perspectives, ideals, visions of the future and forms of organizations. The purpose with our thesis was to do an analysis of different concepts regarding to public service. To the analysis of concepts we used Swedish newspapers and analysed the issue of public service that had been discussed in articles written during the last five years. From this material and other papers about public service we developed a model of public service ideals. We wanted to find out what the different perspectives thought about the Swedish television and their commission.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.