This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

AbstractTitle: Brand exposure in television. A comparison between SVT and TV4 2003 and 2006.Number of pages: 57 including appendixAuthor: Axel VictorinPeriod: Spring 2008Course: Media and Communication studies CUniversity: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: The aim of this study is to evaluate the prevalance of brand exposure in Swedish public service television, SVT and TV4. The Swedish public service TV broadcasting company, Sveriges Television (SVT) advertises itself as purveyor of free television, without commercial or political interference. A B-level essay, written some years ago, showed that the SVT policies were not always observed throughout the entire organisation. The aim of this essay is, by using quantitative research, to study whether SVT is letting commercial interests have their say in the programmes by exposing brand names and logotypes.Material/method: The study is performed through examining 40 hours of television from SVT and 40 hours from TV4, as reference.

Denna uppsats behandlar första fasen i produktutvecklingsprocessen, det vill säga Fuzzy Front End (FFE). FFE är perioden från att det finns en möjlig idé och företaget anser att den är värd att utforska ytterligare, till dess att idén är godkänd och företaget är redo för att börja utveckla samt investera i projektet. I litteraturen anses denna fas som kritisk därför att den är problematisk samt avgörande för företagets fortsatta aktiviteter inom FFE. Forskningen har visat att det finns ett samband, att om företaget effektiviserar FFE bidrar det till framgång för den nya produkten. Det finns liten förståelse vad som verkligen försiggår i FFE fasen och i denna Litteratur Review har 12 stycken teman identifieras för att redogöra för FFE.

Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

This study is based on the development of a new software, which is used as a recommendationtool for selecting the best product. As part of the software development has an external partnerbeen asked to assist. The report will process the expectations that different people have on anew project but also how information is communicated to an external partner.The results from this study show that a software's function is closely linked to its usability.Therefore shall usability been taken into account when a new resource is created. The study alsoshows the importance of being able to share information, on how the program will beconstituted, to someone outside the organization..

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

During 2009-2010 Sweden participated in an international military operation whose intention, according to the Swedish news media, was to fight Somali pirates. The purpose of this thesis is to study various decisions and documents behind the Swedish efforts, both military and foreign aid, regarding the matter of Somali pirates during the years 2009-2010 and analyze the results using an interpretation of the security-development-nexus-theory. The method used is text analysis based on the hermeneutic idea of understanding and interpretation.The thesis studies the international resolutions and national decisions that lead to the military operations in the Gulf of Aden and also the international strategies and national approaches regarding Sweden's assistance in the development of Somalia. The theoretical section contains an interpretation of the vast security-development-nexus-theory. The concepts of security and development are first presented separately and then collectively in terms of military security, societal security, economic security, regime security and human security.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

ABORT ?n GO is a design project within the crossing boundaries of Critical Design and IndustrialDesign.The contemporary discourse on abortion is problematic, and infected by double norms. Thesenorms may cause feelings of guilt and shame in women who have an abortion. The abortion rightis built upon conflicting standpoints; one is that women have right to have an abortion, withoutbeing questioned. Second is the notion that abortion is something that should be avoided, implyingthat you?ve done something wrong if you have had an abortion.With this project and physical product I want to explore and discuss the contemporary discourseon abortion in Sweden.

AbstractThe aim of this study is to investigate the implementation process and the implementation steering of the social development aspects, gender equality and integration, in the program for regional development of the region Kronoberg in the period of 2004-2007.The study asks three questions: 1) How have the social development aspects, gender equality and integration, been implemented in the program for regional development of the region Kronoberg? 2) What has facilitated or hindered the implementation of the two social development aspects? 3) What possibilities to steer the implementation process of the two social development aspects exist at the governmental and at the regional level?In order to answer these questions a qualitative method has been used. To be able to analyse the empirical material, which consists of documents and interviews, the theoretical framework comprehends the policy process and implementation steering. The conclusion is that the incorporation of the social development aspects in the regional development program does not fully correspond with the central intentions, and that is due to circumstances at the regional level..

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.