The purpose of this study is to further develop the understanding of Nextopia, the belief that the next product will always be better, and the effects it has on Word of mouth, both oral (WOM) and electronic (eWOM), and investigate possible causes of this effect. This has been made through an experimental study of responses to two mineral water ads, with a manipulated time frame. First, this thesis supports the fact that there is a general Nextopia-effect on customers being exposed to a future product, which makes them evaluating the product higher in terms of feelings, attitude and intention. Further this study shows that there is also a Nextopia-effect on WOM and eWOM, by customers being more likely to recommend a future product rather than a current one. This propensity to recommend the product also has a relationship with responsibility, which correlates much stronger with WOM than eWOM.

Systems development methods mirror different organizational perspectives, and not all methods are formalised, but what they have in common is the purpose of structuring and supporting systems development processes. Which method would be the most suitable may be determined by the systems development context at hand, because every systems development context is unique. Information is a valuable asset in today?s organizations, and it needs to be protected against both internal and external security threats. In our essay we aspired to find and present suggestions as to how systems developers can include security in the very design based on formalised systems development methods to create systems that are better prepared to meet the security challenges of today.

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

The aim of this report is to give the reader insight into the development of theweb-based accounting application SuperBooky. Accounting is a complex task thatmany beginner entrepreneurs struggle with. The development of this application wastherefore focused on making accounting as convenient and as easy as possible. Theend product targets small enterprises and its functionality was designed with this inmind.To make sure that the application was designed in a user-friendly way, polls werecarried out among individuals with basic accounting knowledge. These polls werethen used as a basis when the application was under development, to ensure that itwas well-suited to the target audience.This project was carried out as a bachelor?s thesis for Chalmers University of Technologyand University of Gothenburg during Spring 2015.

Title:                          Leadership development of individuals in management positions Authors:                    Carl Renér and Peter Simonsson  Institution:                Linneaus University, School of Business and Economics Program:                   Human Resource Management Course:                      Business administration ? Organization including thesis, 15 credits Supervisor:               Olle Duhlin (Linneaus University, School of Business and Economics) Examiner:                 Mikael Lundgren (Linneaus University, School of Business and Economics) It is widely known that the role of managers may result in stress and a heavy workload. As a result of this negative effects organisations have to counteract and find new solutions and systems to facilitate and assist leaders in their work. A popular method for leadership development has come to show both in research and in practice, especially in recent years, this popular method is known as mentoring. This form of leadership development is often applied in so called mentoring programs.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

ABSTRACT The potato has had an important role in the Swedish dietary customs for quite some time. However, during the last forty years, consumption has decreased from 87 kg/year and person to 46 kg/year and person. Other products such as pasta, rice and bulgur are competing with the potato. Many of the competitors have been developed and refined while the potato has not changed much. The potato is still a bulk product while competing products have been differentiated. Stakeholders within the potato market has realized that something has to be done and today there are a number of organizations and networks that all actively work to preserve the Swedish agriculture and specifically the potato as a product. The purpose with this essay is to examine how store managers in the Swedish grocery stores view the handling of the potato in the store, the quality and packaging, marketing and future consumption.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

This thesis focuses on the mass media cover of ?Smart textiles?. The Swedish?smart? textiles are developed in Borås and are a mix of ordinary textile and new technology.  I analyse the article with a text analysis method, looking at themes and the language?s propositions in focus. Context and the actors in the articles are also important in the analysis.Many women occur as developers of the new smart technical product, a field often knowed as a typical male subject.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

Changes in the climate and the environment are largely consequences of human influences. Resources are given to teach adults about the environment. However, there are problems in focusing on adults because it is difficult to influence people when they already have created a lifestyle. We have instead chosen to focus on teaching children about changes in the climate and the consequences of this.Many of the toys available on the market today encourage children to consume. Luxury cars and dolls with hundreds of accessories are often made of materials that has have a negative effect on the environment.Another problem we often encountered during the year is the declining interest in technology and science.

Författarna har haft ett samarbete med Panduro Hobby i samband med deras årliga miljökampanj. Syftet med examensarbetet har varit att med hjälp av befintliga produktutvecklingsprocesser och livscykelanalyser (LCA) ta fram en hållbar textil produkt med växtfärgning. Tanken var att konsumenter sedan själva skall kunna ta fram och växtfärga denna hållbara textilprodukt. Miljömedvetenhet och hållbarhet inom textilindustrin är ett aktuellt ämne. Trots det saknar dagens konsumenter förståelse för textilindustrins påverkan på miljön och har bristande kunskap om textila material för att kunna göra miljövänliga val ute i handeln.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

Honey is a product that may contain pesticide residues due to contamination from bees pollinating various plants as well as elimination of vermin inside the hive. Different methods are needed for analysis of pesticides, since the term includes a wide range of different substances. National Food Administration lacks a validated method for determination and quantification of pesticides in honey using liquid chromatography tandem mass spectrometry, LC-MS/MS. The technique is especially important in analysis of polar and non-volatile pesticides, where gas chromatography is not functioning optimally. After investigating what pesticides could be found in honey produced in Sweden, a number of four pesticides suitable for analysis with LC-MS/MS was compiled; boscalid, impidacloprid, tau-fluvalinate and thiacloprid.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.