This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

Title:Product abandonment ? A comparative study of five ABB-units Level:Master thesis in Business administration, spring 2011.Purpose:The purpose of this paper is to through a comparative analysis examine how different companies, within the same group, works with product abandonment and what factors influence the process.Problem:How important is situational and product specific factors in a product abandonment process in which the organizational factors are constant?Method:This study is based on primary as well as secondary data where interviews represent the primary data. Interviews, following the same interview guide, were made with five companies within the same group.Result:The results from the empirical studies presented in the text below recurring themes derived from the framework.Conclusions:Our conclusions are that the importance of product specific factors is of significant matters in a product abandonment process, even when organizational factors are constant. We base that on that although the companies are within the same group, under the same strategic direction and constructed according to the same organizational structure the product abandonment process is different for the respective companies.Keywords:Product abandonment, product deletion, product elimination, weak products, ABB .

Due to a growing interest in communication in today?s society the demand for equipment that is used in communication networks increases while the competition between companies that produce this equipment grows. To meet the increasing demand and at the same time having a competitive product development many companies use some effective product design, such as the modular product design. When a modular product design is used it?s good to compare different module configurations for a certain product and to simplify these comparisons some tool can be used.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The Product Development Process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

How projects are managed can have a big impact on the project`s result. There are different types of frameworks on the market whose purpose is to help project leaders to pursue a successful project. Those frameworks focus on larger product development projects and both the literature and companies have addressed that the frameworks are too comprehensive for smaller product development projects. They have therefore asked for a framework that is more suitable for those smaller projects. To complete a project on time and to the planned cost is important in both larger and smaller product development projects.

Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a Product Development Process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

Product development is essential for all companies that want to survive in competitive markets regardless of the characteristics of the product that the company sells. Companies that sell products within product categories which can be seen as bad, also need to develop their products in order to remain competitive. If these bad products add a positive attribute, for example that they get organic, a contradiction within the product arises and they get incongruent. This thesis investigates which effects that follow a launch of an incongruent product. The thesis also examines if these effects are affected by the strength of the brand under which the product is launched.A total of 240 respondents participated in an experimental study where product incongruity was manipulated for two different product categories, where one well known brand and one unknown brand were examined in each category.

The pace of product development is increasing. It is important to keep high quality in theproducts even though the time for product development decreases. Those companies whichcan utilize previous experiences are positioned with a significant competitive advantage. ToABB Robotics it has become evident that the knowledge transfer process within the productdevelopment department is inadequate. This study was a result and an attempt to address thisunsatisfactory insight.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the Product Development Process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

The purpose with this project was to invent a product that secures buildings sewersystems against rats. The problem was presented to us by a local building maintainer inHalmstad, who had experienced big problems with rats in his real estate. The project hasbeen carried out by Per Johansson, Robert Lidén and Niclas Nilsson under our ownauspices. We are primarily sponsored by AMLI Business Partner but also byInnvationsgruppen, Halmstad Fastighets AB and Anticimex.To be able to secure a whole building with only one product we came to the conclusionthat the product must be placed in the horizontal sewer pipe that connects with themunicipal sewer system. Our goal was to invent a product that prevent rats from passingand at the same time not affect the water flow.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.