This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

År 2011 startade SDC, skogsnäringens IT-företag, arbetet med att övergå från en funktionsorganisation till en processorganisation. Detta har medfört förändringar i ledarskapet då tidigare avdelningschefer har ersatts med process- och resursägare. Syftet med denna undersökning har varit att identifiera förbättringsförslag för samarbetet mellan process- och resursägare vid SDC. Studien har en kvalitativ ansats då samarbetet mellan process- och resursägare har studerats. En kvalitativ ansats har valts då målet är att uppfatta informanternas upplevelser kring samarbetet mellan process- och resursägare så nära verkligheten som möjligt.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

Denna studie behandlar begreppen process och produkt. Syftet är att genom ett hermeneutiskt perspektiv undersöka några bildlärares syn på begreppen process och produkt i bildundervisningen på högstadiet. Tidigare har fokus legat på elevers färdiga produkt men idag är bedömningen i bildämnet mer fokuserad på elevers process (Skolverket, 2012:3). Undersökningen genomfördes genom  kavlitativa intervjuer. Intervjufrågorna är förankrade i Lindströms (2002:4-5) process- och produktkriterier.

The purpose of this thesis is to make a comparative literary study of ten laboratory experiments with different kind of sources for query expansion terms. The experiments are grouped according to categories of term sources, which are: search results, collection dependent knowledge structures, collection independent knowledge structures and one that combines the two last mentioned sources into one. To enable a comparison all other variables were held as constant as possible. There is the improvement measured in mean average precision, which is used to measure the various sources potential. The result from the study shows a strong connection between the kind of source for the expansion term and improvement of the result.

The purpose of this thesis is to describe how principals apprehend the school library. In order to respond to this I formulated three questions: How was the improvement of the school libraries carried out in one municipality? Is the school library experienced as a part of the schools organization? How is the use of the school´s library experienced? To be able to answer these questions, for the purpose of this thesis, I have studied relevant literature on school libraries, the school organization and literature on qualitative methods. I have made six qualitative interviews. The objects of the interviews were three librarians and three principals.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.

In a global context the traditional democratic process is facing new challenges. Scholars are talking about a transition from government to governance, where local and regional networks as well as international collaboration are an important part in how regional policy is produced and implemented. In this paper the processes in regional projects funded by the European Union are considered, and related to the traditional democratic process. The study has been fulfilled through informant interviews with representatives from four EU-projects. The interviews are supplemented by a qualitative text analysis of current statutes.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

On the first of January 2012, a new public authority was formed in Värmland, due to a new legislation on public transport. The first task for the new public authority was to produce a plan for the development of public transport. In order to do so, it had to execute an extensive consultation process about the long-term goals of public transport. The purpose of the thesis is to investigate how a public authority can use a consultation process as a means to clarify accountability and produce unified goals. To answer that, I have done a case study about how the new regional public authority in Värmland for public transport has acted in the process of writing a plan for the development of public transport.

Through a thorough analysis of the current situation, we have highlighted differences inworking methods for the various workshops and drew up proposals for improvements incombination with a practical work description that can be implemented in the company..

It is important that companies knows how to handle a complaint when they receive one from a customer. This information could the company take care of and use when they develop new services. Furthermore a good complain handling leads to satisfied and loyal customers which increases the revenue for the company. We have examined how SAS handle their internal information process and if this process affects the information and in that case how. The study is performed with a qualitative method, based on deep interviews.

This thesis has aimed to study steering process and institutionalization in the context of educational policy work. This has been conducted by using empirical material from the political decision-making process that preceded the implementation of a new national program on how principals should be educated and certified. By using an aggregated theoretical point of view containing new institutionalism and traditional Swedish curriculum theory, the process was analyzed from different perspectives. The results depict a process that contained several actors who tried to shape the principal education program differently. From the theoretical perspectives, the decision-making process could be understood as an act of both self-interest as well as trust in their own beliefs and cultural values.