In this thesis we have examined why the establishment process of travel destination is essential for the tour operators and how the process can be influenced by different conditions. The thesis is written from the perspective of the tour operators and with the tour operator Ving as our case study, we have been able to create a picture of how the establishment process of travel destination may look like.We have chosen to deal with some different areas in this thesis that all are important for the creation of a holistic picture of the process. The overall segments listed in this thesis are the process itself, the tourist, marketing, the product creation and demand. By connecting our theoretical framework to the collected empirical data from our case study, we have analyzed the establishment process and drawn our conclusions..

An information audit identifies, among other things, organizations information resources, the information flow and the needs of the information users. The purpose of this masters thesis was to describe the management of information within a local unit of Borås municipality by putting an information audit-method in practice. The focus was on three issues: What information needs could be seen in the organization? How does the information flow through the organization? How does Sugan Henczels seven-stage model serve as a tool to map the management of information within the local unit? The study only described the situation at a certain time at the chosen organization. The seven-stage information audit model was revised and adjusted to the studied organization by only carrying out four of the seven steps: Planning, Data collection, Data analysis and Data evaluation.

Syftet med denna studie var att undersöka unga idrottares upplevelser i en topprestation.Studiens frågeställningar var:·        Vilka upplevelser har unga idrottare i en topprestation?·        Upplever unga idrottare flow i en topprestation?·        Vilka faktorer ligger bakom en topprestation hos unga idrottare? Utifrån syfte och frågeställningar valdes mätinstrumentet Flow State Scale-2 (FSS-2). FSS-2 består av ett påståendeformulär som mäter den totala upplevelsen av flow samt var och en av de nio dimensionerna av flow.Kontakt togs via telefon och mail med ansvariga tränare vid idrottsgymnasier för att finna unga idrottare med ett tydligt minne av en topprestation. Undersökningsgruppen blev 51 stycken unga idrottare, män och kvinnor i åldrarna16-20 år som utövat fotboll, ishockey eller orientering på elitnivå.Litteratursökning gjordes i bibliotekskatalogen tillhörande Umeå Universitet. Den funna relevanta litteraturen och artiklarna har legat till grund för denna studies bakgrundsdel. Påståendeformuläret FSS-2 visar att undersökningspersonerna, i sin topprestation, hade en stark upplevelse av inre tillfredsställelse, tydliga mål, koncentration på uppgiften, känsla av kontroll och balans mellan skicklighet och utmaning.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

In the digitized world many organizations experience a large flow of information. To sort and manage all the information can be difficult. Individuals may experience a phenomenon called ?Information Overload?, due to the fact that the information flow is too extensive. There are various reasons why individuals are affected by this phenomenon.

This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

KSL Trading Inc is a trading company in the Jönkoping area that distributesmaterial for the furniture and interior design industry.The purpose of this report is to analyze the existing material flow andwarehouse layout as well as to identify the issues there are today at KSL?swarehouse for board material. When we identified what kind of problems thatexisted we were able to design a new plan for the material flow and storagepossibilities. The problems we found where:? There is no well-organised warehouse layout? There are no routines to keep the warehouse clean and in order? There is no formed plan how to handle materialTo solve these problems we have used different methods like interviews,observations, calculations and literature studies.

Concrete is a very common construction material. It´s characteristics are strength, durability and formablility. Superplasticizer is a common admixture, which changes the properties of concrete. Today (spring 2007) there are no certian mathematical methods to calculate the required percentage of this admixture needed to give the necessary set slump flow in the overall concrete recipe. Concrete batching companies must therefor experiment with different amount of superplasticizer in order to meet the specified slump and strength. The purpose og this report is to investigate if any mathematical relation can be established between the amount of superplasticizer used and the slump flow achieved. After carrying out some practical experiments using four different superplasticizers a direct relationship can be establish between the percentage of admixture used and the slump/flowability achieved. Unfortunatly at present due to the numerous variables, the calculation of mathematical formula can not be achieved..

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.