Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital. It was also the returns of the companies own capital there the main difference existed between the big and the small companies.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Background: Investors have several options to choose from when the goal is to achieve the highest yield at the lowest cost and risk. Stocks are a common investment options, but is also associated with risks. Portfolios are usually constructed with several different assets to reduce the unsystematic risk of investment. Funds are similar to composite stock portfolios, the big difference is that they dealt with in their entirety and investors may not affect the fund's content. The problem remains that whether you choose stocks or mutual funds there is still uncertainty as to how the future will unfold.

Background Atelectasis is a commun respiratory complication related to general anesthesia and may contribute to pneumonia and acute respiratory failure. Atelectasis apear within 10 minutes after anesthetization and occur in 90% or more anesthezied patients regardless of age and gender. The aim of this study was to indentify if there are any evidence for which methods are ultimate or are most efficacious to reduce and prevent the formation of atelectasis.                                                                                                          Methods This study is a descriptive litterature study where 28 scientific studies have been indentified for review and analysis.                                                                                                               ResultsThe use of 100% oxygen during the induction of anesthesia favors the developement of atelectasis. This can be prevented by preoxygenation with oxygen content of 100% combined with a PEEP of 6-10 cmH2O. When free airway is secured, oxygenation with 100% was found to be unnecessary.

The aim of this littrature review has been to describe how you can satisfy the need of nourishment for older people who suffer from dementia. Data has been retrieved by searches in Academic Search Elite, Sience Direct, Blackwell, PubMed and in the Journal Vård i Norden. The studies show that most of the people with dementia have a hard time to satisfy the nourishment. The results show that through different preventive measurement you can improve the nourishment for these people, to set the table, play calm music and to have a table companion. By taking the food oneself created a good meal environment and the individually need was provided for.

Bakgrund: På intensivvårdsavdelningar finns olika rutiner kring huruvida endotrakealtubens position hos intuberade skall skiftas eller bibehållas i samma mungipa, då sidbyten kan leda till allvarliga komplikationer. Rutinen vid CIVA har varit att byta endotrakealtubens position på alla intuberade patienter en gång per dygn. Varken rutinen med skifte samt bibehållen position har utvärderats. Syftet med studien är att undersöka oralt intuberade patienters munhälsa vid bibehållen position av endotrakealtub under vårdtiden. Metod: Studien är en kvantitativ deskriptiv tvärsnittsstudie.

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

When exposed to them, isocyanates can induce serious injuries in the respiratory tract and irritation on the skin and in the eyes. They are therefore interesting from the point of view of occupational health. The purpose of this thesis was to collect isocyanates in air with impinger-filter samplers and solvent free samplers. Furthermore the isocyanates were to be analyzed with liquid chromatography-mass spectrometry. The solvent free sampler consists of a polypropylene tube and filter holder fitted with glass fiber filters impregnated with derivatization reagent, coupled with a pump.

Background: Evaluation of lameness in horses is traditionally performed by a veterinarian who subjectively evaluates the movements of the horse. Accordingly, lameness diagnosis varies with the veterinarian and circumstances for which the horse is examined. Research within the area has long tried to establish an objective and standardized method for lamenessevaluation in horses. Several methods have been shown to be reliable and are used regularly within research, for example measurement of forces between the hoof and ground, and measurement of movements with high speed cameras or accelerometers. However these methods require considerable preparation, standardization, and expensive equipment as well as produce large amounts of data that are incomprehensible for the clinician.

The Swedish bank Handelsbanken has, according to their own way of measuring, been more successful than a weighted average of their competitors during the last 38 years. They have also handled the recent financial crisis, as well as the one in the 1990´s, better than most other banks. This paper studies their management control system at branch level in order to identify the controls which have been enforced to ensure that a low risk level is retained in the lending. The controls that have been identified are; (1) A decentralized organization with the offices as profit centers where the manager has restrictions regarding risk level and the results are measured as K/I (cost/revenue). (2) The absence of bonuses and individual follow-up regarding performance measurement.

The purpose of this paper is to investigate the possibility of replacing data from highspeed filming (Qualisys motion capture) with data from Inertial Measurement Units (X-io technologies), when used to run a model of torso and pelvis in OpenSim. Qualisys motion capture data is used as the golden standard to validate the result visually and with Bland-Altman plots.In order to obtain comparable data experiments are conducted where both methods of collecting data are used simultaneously. Data from the IMU's then need to be processed in Matlab before it can be used to run the OpenSim modell. Several Matlab programs rotate the IMU data to a static reference frame, filter and integrate it, then create viritual markers that correspond to Qualisys' optical markers.The conclusion is that using IMU as a method for collecting data can replace Qualisys in some applications, but not in ones that require high precision. However, this paper only begins the examination of IMU's and there are most likely improvements to be made..

VIDA Vislanda har ett behov av att veta hur effektiv produktionen är på deras nya hyvleri. Därför är arbetets syfte att undersöka stopptidslängder samt bakomliggande orsaker till stoppen på företaget. Det ingår även i arbetet att lämna förslag på åtgärder som kan leda till förbättringar i verksamhetsgrad samt reduktion av stopptid.VIDA Vislanda vill veta vilken verkningsgrad, verklig löpmeter ut och verkligt stycketal ut för varje enskild dimension och längd. Resultatet presenteras efter detta önskemål men den totala verkningsgraden för hela mätperioden har också beräknats, till 52 %. Om VIDA åtgärdar de största återkommande stopporsakrna enligt våra förbättringsförslag kommer stopporsakerna att minska och således verkningsgraden att öka..

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.