Sök:

Sökresultat:

545 Uppsatser om Precision fire - Sida 15 av 37

Maskinsamverkan mellan två halländska gårdar :

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Analys av miljöaspekter för en planerad svensk fabrik i Kina

A Swedish company, company F, will establish a new factory in China. Company F is adivision within Company F. The factory in China will manufacture wire products. Thepurpose of this final thesis is to analyse which legal and practical measures the company hasto undertake during the process of localization to get approval from the Chineseenvironmental legislation.An analysis of the influencing factors on the environment from the production in theconstruction in Sweden was carried through. A material-balance was analysed according tothe flowchart of the production.

Mekaniserad spaning i dag och i framtiden

Den mekaniserade bataljonens främsta sensor att samla in underlag till underrättelsesektionen är spaningsplutonen. Spaningsplutonen på mekbataljon har bytt organisation över åren och gått från att vara ett terrängbils eller bandvagnsburet förband till sin nuvarande form med stridsfordon 90. Men har förbandet använts på rätt sätt sedan det tillfördes stridsfordon? Hur bör framtidens chefer nyttja plutonen för att maximera effekten?Arbetet baseras på de reglementen som finns idag samt intervjuer med personal tillhörande spaningsplutonerna och bataljonsstaber. Utöver det kommer en jämförelse med US Army Armored Cavalry göras..

Plantinventering och plantkontroll med digitala bilder från helikopter :

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

Förbränning av träpellets och pelleterad halm i en 40 kW rosterreaktor

The project focus on combustion of softwood pellets and pellets in a 40 kW grate fire reactor at TEC-Lab. Dept Applied Physics and Electronics at Umeå University. Experiments were performed at four primary airs to fuel ratios (0.7 to 1.3), where aspects such as temperature profile, levels of gases (CO and NO), sintering-/-slagging and unburned fraction of the ashes were studied. Four different fuel loads were used for wood pellets (10, 20 and 30 kW) and one fuel load for straw (10 kW). Combustion of straw proved very difficult to ignite, and also led to other combustion-related technical problem such as slag formation due to the relatively low melting temperature-/-slag temperature of the straw.

Effects of ten year old enrichment plantings in a secondary dipterocarp rainforest : a case study of stem and species distribution in Sabah, Malaysia

Large areas of forests in the tropical region have during the last decades been lost and converted to new land uses while other areas have been degraded into secondary forests. These secondary forests need to be restored and rehabilitation through enrichment planting and liberation may help to speed up the recovery process. The objective of this thesis was to evaluate a rehabilitation method that includes enrichment planting, slashing of weeds and girdling of unwanted trees. The site for the project is situated in Sabah, Borneo in a secondary forest which had been logged and burnt by a wildfire. The project?s goal is to rehabilitate and increase biodiversity through enrichment planting of seedlings mainly belonging to the family Dipterocarpeaceae (dipterocarps).

Nytt blod, gamla bilder : Visuell våldsgestaltning i film och spel

The paper discusses and analyzes differences and similarities in depictions of violence in the two narrative media of films and games. The work is based on existing theories on representation, remediation, narration and immersion ? theories which are further developed and discussed by the author. The movies Man on Fire and Kill Bill, as well as the games Ninja Gaiden and Grand Theft Auto are analyzed and used as examples of how depictions of violence in films and games can or should be studied. Also, the possibilities for development of the theories used in the paper are considered.

BIM vid installationsprojektering

Planet rendering plays an important role in universe visualization and geographic visualization. The recent tools and methods allow better data acquisition, usually with very high resolution. However in computer graphics, there is always the limitation on the resolution of geometry and texture due to numerical imprecision. Not many applications can handle high resolution data effectively.This thesis introduces, Implicit Surface Scene, a level of detail scene management inspired by dynamic coordinate system and SCALEGRAPH? which change over time depending on the current camera position relative to the planet surface.

Dragbrotschning av invändiga profiler

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Smartphones som ny marknadsföringskanal : Nya möjligheter inom precision, segmentering och relationer

Syfte: Syftet med den här uppsatsen är att öka förståelsen för hur samhällets och teknikens senaste utveckling har bidragit med nya marknadsföringskanaler och vad detta innebär för företags marknadsföringsstrategier. Med detta syfte som utgångspunkt har tre forskningsfrågor formulerats för att avgränsa forskningen än mer:Hur kan smartphones som marknadsföringskanal hjälpa företag att precisera sin marknadsföring till kunden?På vilket sätt har den nya mobila tekniken, i form av smartphones, påverkat företags segmenteringsmöjligheter?Hur kan ett företag använda sig av smartphones, som ett verktyg för att hantera kundrelationer?Metod: Uppsatsen är resultatet av en kvalitativ studie med en huvudsaklig induktiv inriktning. Primärdatainsamlingen har skett genom kvalitativa semistrukturerade intervjuer.Slutsats: Efter att ha undersökt detta ämne har vi dragit slutsatsen att valet av smartphones som kanal kan hjälpa företag att precisera sin marknadsföring genom att telefonen är tillgänglig och personlig för kunden. Därför menar vi att kunders integritet och acceptans kommer att vara avgörande faktorer och viktiga att beakta.

Släckvattenpartiklars spridning i mark och grundvatten : En studie av brandgenererade partiklars egenskaper och påverkan på föroreningsspridning

Vid brand kan stora mängder med förorenande ämnen och partiklar bildas. Dessa kan, vid släckning av brand med vatten, ge upphov till kontaminerat släckvatten. För att förstå och kunna förutsäga föroreningsspridningen från släckvatten i mark och grundvatten krävs det att släckvattenpartiklars inverkan på föroreningsspridning utreds. Syftet med detta arbete var att öka kunskapen om de kemiska och fysiska egenskaper partiklar i släckvatten uppvisar samt hur partikelegenskaperna påverkar föroreningstransport i vattenmättad mark och grundvatten. Studien har genomförts i form av en fallstudie där släckvattenpartiklar från en enskild brand har undersökts.Utifrån partikelegenskaper finns två mekanismer som kan räknas som styrande för partikeltransport i mark och grundvatten: fysiokemiska partikel- och ytinteraktioner samt silning.

Pneumatiska artificiella muskler : med hjälp av en robotarm

According to the study [1] several firefighters are killed in action each year. This happens naturally in various ways. One of the major factors is that firefighters often do not know how the environment looks like, for example that a building in an industrial area contains hazardous gas cylinders. Without a solution, fire-fighters will continue to die in duty. It is therefore important to solve this problem so that we can minimize the risks and save lives.The goal of this project was a control system for pneumatic artificial muscles.

När autenticiteten utmanas : En föremålsundersökning och dess tänkbara konsekvenser för museiobjektet

This paper deals with an object donated by a group of members of the public to the Royal Armoury in Stockholm, Sweden. The donators claimed to own a horse bit that had been used by King Gustav II Adolf's mount in the battle of Lützen, where the King was killed. The bit was a gift to the donators' ancestor, the farmer and politician Petter Jönsson, from the King of Sweden, Oscar I, in the 1850's. In this paper, the donated bit is examined and found unlikely to be the bit used at Lützen. The examination also revealed that the bit now worn by the horse in its display is a prop, included in the group of objects in the 19th century, and that the original bit probably was lost in a fire in 1648.

-BLB- M/S Calmare Nyckel : Ballast-, Läns- & Brandsystemet på M/S Calmare Nyckel

Rapporten är skriven för att dokumentera den befintliga installationen av ballast-, läns- och brandsystem ombord på fartyget M/S Calmare Nyckel. I enlighet med uppdragets specifika-tioner kommer även förslag på förbättringar att presenteras. Förslagen bygger till största del på fakta från en leverantör av ventilkomponenter och av klassen ställda krav på installationen. Förbättringarna beaktar i huvudsak minskade risker och ökad säkerhet. De största skillnaderna med de nya förslagen är att länsvattensystemet skiljs från de övriga systemen, de viktigaste funktionerna fjärrstyrs med hjälp av pneumatik och systemets komponenter märks enligt branchstandard..

Osäkerheter vid brandteknisk dimensionering av ventilationssystem

This masters thesis deals with smoke spread via ventilation systems. One aim of the thesis is to investigate and explain the differences in efforts to prevent smoke spread via ventilation systems in different countries. A second aim of this thesis is to investigate how frequently occurring smoke spread via ventilation systems in Swedish buildings are. A third aim is to investigate how uncertainties in input variables to smoke spread calculations will affect the result of calculation. To be able to do this the most important input variables are identified and analysed.

<- Föregående sida 15 Nästa sida ->