The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

!is began as a product design challenge, which stipulated broadlythat the designer be ?inspired by a subject?, whose ideas would leaddown a path of product idea evolution. From there, the goals forthe end-product would undergo rigorous revisions, re-de#nitionand re#nement. !e end-product itself would be the result of anentire thinking process.!e subject I have chosen is: Time. I want to challenge and evenalter our conventional sense of time, using principles ofdesign.

In Sweden, large scale planting of Lodgepole pine (Pinus contorta var. latifolia) started in the beginning of the 1970?s. At first, the aim was production of pulpwood, but later, also production of timber became considered realistic. Today, Sweden has more than 520 000 ha of Lodgepole pine.

The aim with this thesis was to investigate what characterises an English Arts and Crafts garden how they could be modernised in Sweden. My research was limited to 20 weeks of full-time writing and worth 30 ECTS. Through literature studies, interviews and site visits I could analyse my findings which resulted in a concrete garden design project. The Arts and Crafts was a movement that started in England during the 1880?s and evolved as a reaction towards the industrialisation. The influence came from the writings and practices of John Ruskin (1819-1900) and William Morris (1834-1896) who advocated the importance of craftsmanship. The Arts and Crafts movement also became a ?recipe for life? and was associated with a healthy and morally pure way of living.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

Research suggests that society's vulnerability to natural disasters along coasts could increase as a result of climate change, which is likely to lead to elevated sea levels and possibly an increase in the occurance of meteorological phenomena such as storms and tropical cyclones. Following the Indian Ocean tsunami disaster in 2004 and Hurricane Katrina in 2005, both of which received considerable media attention, empirical data has indicated that coastal vegetation might be able to protect and reduce damages to coastal communities during tsunami events and tropical cyclones.The aim of the essay has been to study the function of coastal ecosystems as protection against tsunami waves and storms from a risk management perspective, meaning that I have, through an overview of scientific articles, compiled current research on how coastal ecosystems can attenuate storm surges and tsunami waves, and analysed how this knowledge can be put into practice in coastal communities from a risk management perspective, i.e. if coastal ecosystems are a viable risk reduction measure, are practically applicable, and if so, how they could be applied.There is empirical evidence suggesting that coastal ecosystems, particularly mangroves, can reduce the strength of a tsunami wave, but full scientific consensus on this issue has not yet been reached. With regard to protection against storm surges, there is extensive scientific evidence that coastal vegetation can mitigate damages and reduce the height of a storm surge, although the wave has to traverse several kilometres inland through thick vegetation for the protection to be effective. A synthesis in the form of a figure regarding the many physical factors that influence wave development through coastal ecosystems has been created in an attempt to simplify and explain the phenomenon.The conservation and restoration of coastal ecosystems can be justified from a risk management perspective, but planting new forest belts for the purpose of disaster mitigation is quite unrealistic and can rarely be sustainable, since, for protection to be effective, the forest belt must extend several kilometres inland from the coast, and would thus likely prove difficult to implement along coastal societies..

It has been observed by both onion producers and a plant protection advisor on Öland (an island off the east coast of Sweden) that basal rot is the largest contributory factor to reduced onion quality and yield. Basal rot is mainly caused by species of Fusarium fungi. The aim of this study was to: a) investigate which species of Fusarium that can be found in onion produced on Öland, b) describe the symptoms caused by the different Fusarium fungi found and c) explore, through interviews with the onion producers on Öland, the mechanisms that may be involved in the observed increase in basal rot.Onion bulbs (Allium cepa) were sampled on two occasions. In total 181 onions from 11 different fields were analysed. In addition, eight onion producers were interviewed.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

The society of today is dependent of secure transports and deliveries of electrical power. Interruptions in different activities because of fallen trees cost a great deal of money in form of reparations and claimed damages for transport companies and electrical suppliers. Fallen trees along some railway sections are a severe problem. For instance, to repair the damages of the storm of week 5 year 2002, costed 2 800 000 SEK for the line region of Hässleholm. Today, the Banverket railroad company has no norms in general for how close to the railway the forest is allowed to grow.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.