The comprehensive goal in this study was to examine important factors in an introduction of a new machine team. The aim was to identify what elements should be part of an introduction program for new machine team. The examination was done together with Stora Enso Skog. A new machine team and their supervisors where analyzed during a six month period. The evaluation was done with open interviews of the team members and their supervisors. The main question was what should be included in an introduction program to develop a successful machine team as effective as possible? Interviews of the new team and analyses gave good indications how the procedure should be done.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Denna processbeskrivning undersöker hur en plantering i parkmiljö i Gävle skulle kunna planeras baserat på systemet matrix planting. Begreppet matrix planting beskrivs, samt grunderna för hur ett växtsamhälle byggs upp med passande växter. Fortsättningsvis redovisas inventeringen av den aktuella platsen, med beskrivning av de ekologiska förutsättningarna och förvaltarens önskemål. Ett förslag presenteras, där tankarna bakom formgivningen förklaras. En förteckning på lämpliga växter och deras egenskaper ingår.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Abstract The main aim for this research is to come to an understanding for why young people choose to apply for the machine program when the time comes for the students to make their choice of upper secondary school program. The second aim for this research is to try and come to an understanding on how to make the machine program more interesting for future students to apply to.  The method of this research is quality method with the usage of interviews. With a total of six students in the first grade going on a school in the middle part of the country I tried to get answers to my questions. There are many things that affect students when they are facing what gymnasium program to choose and a very common answer by students in this study is that friends and work after school are some of the reasons for why students choose, for example, the machine program. The study also shows that parents has less influence of the students choice of gymnasium program and in fact, all students in this study made the choice to pick the machine program as their gymnasium program, but not always the machine program as their first choice. With the comparison of similar studies with my study the results are often in line with what other scientist have come up with.

This is a study in the field of Music Information Retrieval (MIR) concerning classification of musicgenre. The study uses a music listening experiment and machine learning methods to determinewhether or not the drum sounds from different songs contain sufficient information to classifygenre.MIR methods are used to extract data from the audio signals. The data is used together with theclassification results of the listening experiment to train different machine learning algorithms toclassify the songs in different genres.The results indicate that using only drum sounds for genre classifications works well, both forlisteners and for machine learning methods..

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

Individual trees can act as carriers of meaning. When a person attributes deep meanings to a specific tree, a relationship between the person and the tree is created. To avoid conflicts between users and planners, increased awareness is required of how important individual trees may be to a person. The objective of this study was to elucidate persons? relationships with individual urban trees.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Insecticides will be removed from Swedish forestry, at present insecticides are used to treat our seedlings to avoid them from being attacked by pine weevils. With the forthcoming ban on insecticides alternative protective measures will have to be tested. Holmen Forest Ltd has aimed to find an alternative and have developed a mechanic pine weevils protection accessory as well as a new concept on planting pipes. Studies have been conducted on the behalf of Holmen Forest Ltd to see how planting with the newly developed mechanical protectors and plant pipe stands up against the conventional methods used today. The study was conducted over a three week period. Three factors were compared regarding planting quality including i) pressure around the plant, ii) the depth the plant ended up in, iii) plant angle. Mechanical plant pipes were used in the study, and where tested like a one-handed and a two-handed pipe. The study concludes that further development is needed for the mechanic plant protector to live up to the speed and quality of conventional methods.

The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.