This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

Abstract (in English)The work that lead to a CE- marking and the creation of a total drawing foundation on an existing machine carried out on the company Polytec Composites Sweden AB in Ljungby. The company have design an machine that exist in six example that runs in the production. To be able to use the machine the company have to work out a CE-marking. The process that summed up all the document that needs for the machine to make a CE-marking. The documentation includes a total drawing over the machine and a risk analysis performed by a group employers on the company.

Denna processbeskrivning undersöker hur en plantering i parkmiljö i Gävle skulle kunna planeras baserat på systemet matrix planting. Begreppet matrix planting beskrivs, samt grunderna för hur ett växtsamhälle byggs upp med passande växter. Fortsättningsvis redovisas inventeringen av den aktuella platsen, med beskrivning av de ekologiska förutsättningarna och förvaltarens önskemål. Ett förslag presenteras, där tankarna bakom formgivningen förklaras. En förteckning på lämpliga växter och deras egenskaper ingår.

Resignations are common in all business sectors and can also be found among forest machine operators in the forest business. As the industry today faces a lack of forest machine operators it is justified to determine why machine operators choose to quit their jobs. The aim of this study was to a) find out the number of machine operators that have resigned b) identify and analyse the cause for these resignations c) identify the reasons why the machine operators started to work in the forest and d) give suggestions on different measures that will limit resignations amongst forest machine operators. A questionnaire was sent to machine operators who have quit working as employees, contractors or as employees for contractors with Holmen Skog during 2003-2007. 32 machine operators responded to the questionnaire. Interviews were made with 10 machine operators who had answered the questionnaire to gather more qualitative data. The results of the study indicate that fewer forest machine operators change profession than employees in other occupations in Sweden.

Digital depth-to-water maps can be produced from a digital elevation model (DEM). Then GIS- based algorithms are used to calculate water flows and the depth-to-water index classes dry, fresh, moist and wet. The purpose of this study was to investigate the possibility to use depth- to-water maps for site adapted planting.The results showed that use of depth-to-water maps for site adapted planting, roughly halved the proportion of improperly planted surfaces from an average of 9 % to 4 %. The variation in the values of proper surface decreased and the result became more even.. In addition, more pine than spruce was incorrectly planted.

Regeneration with scarification and planting is a well known method, but the plants have a tuff period in the beginning. Decease of plants comes from pine weevils, dry weather, browsers, wrong method of scarification and wrong time for the planting. These are some courses why not every planting gets successful. The purpose with this study is to investigate witch time of planting gives the best result, spring or autumn planting and to give a answer of witch factors are the main course of deceases. The goal is to have the study to decide witch time to plant after final felling. The choices of plantings were maid from a period of three years. Spring plantings were from year 2005, 2006 and 2007 and autumn plantings were from 2004, 2005, and 2006.The purpose was to compare differences in deceases at the same spring weather.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

In order to evaluate different afforestation methods for exposed heath lands a field experiment was established in Mosfell on southern Iceland in 1989. The trial comprised six different site preparation methods (control, herbicide application, tree shelters, patch scarification, TTS trenching and mounding). In total 960 container seedlings (1+0) and 960 Nisula roll transplants (2+1) of lodgepole pine were planted. Various planting positions (furrow, hinge, no site preparation (control) and on top of mounds) were tested within the site preparation treatments. This study involves renewed measurements and analyses of the trial.After 19 years the overall survival was 51,7 %.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

The number of silvicultural contractors has significantly increased in the last decades, and among its main clients are the forest companies. The purpose with this study was to describe the contractors that worked with planting in Norrbotten and Västerbotten in 2009 for Holmen Skog, Norra Skogsägarna, SCA Skog and Sveaskog and also examine if there was any correlation between the contractors? competence and the quality in the planting they achieved. A survey was made among 47 contractors with a questionnaire who performed planting for the forestry companies in 2009. 27 contractors answered the questionnaire and 4 representatives of these contracting companies took part in an extensive interview.

This study has been performed with the help of forest machine operators in order to improve the forestry planning at Holmen Skog Örnsköldsvik-region. For Holmen Skog forestry planning is basic for a successful forestry. In a survey I have investigated what can be improved in some areas that are planned for harvesting. The result of the investigation will be used to support the machine operators as much as possible. The study has generated 49.5 % of responses and because of this low response rate, no clear conclusions to anyone else except the responding machine operators can be drawn. It has been proved that there are some details in the forestry planning system that are inadequate, such as marked routs for trails, tractor paths and buffer zones against streams. The quality of forestry planning varies greatly between different locations, as much as 50 % of the responding machine operators thought so. Over 40 % of the responding machine operators claim that the information from Holmen is insufficient. One thing that would improve the forestry planning within Holmen would be to educate all forestry planners and then do continuous follow-ups..

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

Denna processbeskrivning undersöker hur en plantering i parkmiljö i Gävle skulle kunna planeras baserat på systemet matrix planting. Begreppet matrix planting beskrivs, samt grunderna för hur ett växtsamhälle byggs upp med passande växter. Fortsättningsvis redovisas inventeringen av den aktuella platsen, med beskrivning av de ekologiska förutsättningarna och förvaltarens önskemål. Ett förslag presenteras, där tankarna bakom formgivningen förklaras. En förteckning på lämpliga växter och deras egenskaper ingår.