Gunnebo House and Gardens was designed during the late 18th century by architect Carl Wilhelm Carlberg as a summer residence for the wealthy merchant John Hall Sr. and his family. The garden consists of formal garden, kitchen garden and English park. For the first two parts several original drawings have been preserved and here a lot of restoration work has been carried out. This paper aims to examine how the English park might have been implemented during John Hall Sr.?s time and to create a plant scheme for the area called ?Engelska kullen? (The English hill).

This report is about the experiments with mixing of the separated water and the vacuum pump seal water at Hellisheiði power plant. This is done to prevent silica scaling and clogging in pipes and reinjection wells as well as eliminating vacuum pump seal water from the plant. The experiments were done in four stages: the first stage comprised of tests with different flows of separated water at 70°C, the second stage was carried out by mixing the separated water at 70°C and the seal water with different amounts of the seal water, the third and the fourth stages were like the first and second but with the separated water at 120°C. The results show that this method is good if the mixture is around 50/50 separated water and seal water, to control the silica scaling in the separated water and to be able to reinject the seal water with the separated water. This does not eliminate the silica scaling in all of the separated water because the amount of separated water is much more than the amount of seal water that comes from the plant. .

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

In Sweden there are 354 000 private individuals owning forest. Of these forest owners there are at least two thirds that are self-employed, which means that about 215 000 forest owners conduct some kind of work in their own forest. Those numbers do not refer to firewood production, but every year 7.3 million piled cubic meters of firewood are used for heating Swedish households. This implies that many households are also producing firewood. The objective of this study was to assess and analyse the small-scale firewood production in the Umeå-region in terms of persons engaged in the work, equipment used, produced volumes and share of forest-owning households involved in these activities. According to results from a questionnaire, the average firewood producing person is a man between 40-60 years old.

Meat and fish was the most important food for the Sami people in northern Scandinavia until the beginning of the 20th century. It is not so well known that the Sami people also used a lot of wild plants as food and medicine although that kind of food was relatively common among them until the end of the 19th century. The purpose of this master thesis has been to describe which plants the Sami people used in general and also which plants were the most commonly used, and when and how these plants were harvested. I also wanted to measure the quantities of Angelica archangelica and Rumex acestosa within traditional harvest sites. Furthermore I wanted to find out if the plant use differed among Sami groups geographically.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..