Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

Problem discussion: How should information be handled to facilitate and benefit from modularity? How should Clarkson Inc. adapt their information handling to modularity and what benefits can be reaped by doing this? Purpose: The purpose of this master thesis is to help Clarkson Inc. adapt their information handling to modularity and to extract theories, methods and tools to guide companies in similar situations.

As the cities are becoming more crowded, the urban distribution has become a major logistical challenge. Some commonproblems in the inner cities arelimited accessibility and idling. Many of Sweden's municipalities are above the limit values for PM10limit set by the EU.Sundsvall is one of these municipalities and has the vision to create a sustainable city and region. Sundsvall LogistikparkAB is part of an EU project, SMARTSET, which is collaborationbetween several cities in Europe. SMARTSETSundsvall is about to develop a market-based sustainable model for city logistics.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

Introduction:A good work environment and good resources among district nurses? and general nurses? are important in the provision of good nursing care. For patient security it is also very important that resources and time are used in an appropriate way. A lot of time is spent on non-core activity, for example administration takes more and more time, which can result in feelings of stress.Aim:The aim was to describe how district nurses? and nurses? in primary care perceived their work environment, how their worktime content was distributed and if there was some connection between perceived work environment and the distribution of work time.Methods:A mapping of the content of the work was made in two parts.

Under senare år har allt fler organisationer och företag insett hur viktigt det är att identifiera och förstå sina processer, och för att kunna styra och utveckla dem, är det bra att veta vilka de är. Därför vill Reumatologi kliniken veta vad som händer med patienter som har psoriasis artrit, när dem är nyinsjuknade eller ska börja behandlas på deras klinik, samt hur hanteras smärtproblematiken, när de återkommer till kliniken, detta har vi gjort genom att kartlägga processer och sammanställa på vilka olika sätt dessa patienter hanteras på kliniken idag, vart remitteras de? Hur ofta förekommer detta? Vad gör att vissa remitteras och andra inte? Förslag på hur kliniken kan använda denna kartläggning i framtiden.Detta examensarbete genomfördes på uppdrag av:Centrum för Teknik i medicin och hälsa, CTMH, i samarbete med Karolinska Sjukhuset. Arbetet omfattar 15 högskolepoäng.Vid detta arbete har vi använt oss av djupgående intervjuer för att få en djupare insyn i den reumatologiska klinikens handläggningsprocesser. En konstruktionsmodell har utvecklats för att identifiera vilka intervjufrågor som är relevanta för detta projekt.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

The ISO 9000-series is a set of quality standards created by the International Organization for Standardization. The series is intended to provide guidance to companies in the process of deploying an effective quality management system. The series includes the requirements standard ISO 9001. This standard contains requirements on how a quality management system should be designed and how companies generally must work with quality issues. When a quality management system is introduced, if wanted, a quality certification can be implemented.

AimThe aim with this essay has been to investigate how preschools profiling in motor activity training, work to stimulate motor development of children. In order to study this, the main focus for the research has been on the following queries:What characterize motor activity training at the preschools studied?What is the purpose with the motor activity training of preschools which were studied?How do the preschools describe the affect that motor activity training has on children?How do the preschools look at the need for motor activity training?MethodFour in-depth interviews were conducted with representatives of the chosen preschools profiling in motor activity. My selection was based on a strategic sample and this was made by an internet mapping of preschool activities in the districts of Stockholm, and information from the service guide of the town of Stockholm. Then e-mail was sent to ten contact persons at preschool units, and ten preschools were contacted directly by phone.

With new energy directives in place, the Swedish Social Service (SSS) stands beforethe challenge how to reduce the energy demand in its locales. It is a complex matter,as the locales are rented from various property owners and it becomes a question ofhow to reduce the operational electricity and influence the property owners to workmore with energy efficiency. This thesis takes a balanced research approach in threeparts. Firstly a qualitative part in form of interviews with personnel at the SSS and itsproperty owners, secondly a quantitative part of descriptive nature in form of energystatistics and thirdly a literature review of Energy Management (EM) Supply ChainManagement(SCM), Green Supply Chain Management(GSCM) and EnviromentalPerformance Indicators (EPI). This in order to be able to give normativerecommendations of how the SSS should act to reduce its energy consumption in itslocales and provide new insights on how EM, SCM, GSCM and EPI can be applied ineffect.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.