Stress and burnout are two words that are commonly occurring in many contexts today. More and more people experience that they are stressed and that they does not feel well. The long term sick -leave increases as a consequence of people being burned out. These phenomena prolong over all ages, sexes, classes and professional categories, which probably means that the construction industry would not be spared.  In the construction industry, stress and bad health are no new phenomenon, already during the 1970s and big parts of the 1990 s, the construction sector were exposed to the phenomena.A sector that has a large turnover annually cannot presumably be faultless.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This paper is a qualitative study on the influence of the residents in a special communitydwelling within the care system for elderly. The purpose of the study is to describe and analyse with a user perspective how particularly staff members but also a group of retired people living in this dwelling interpret and articulate the concept of resident influence. How the retirees can influence the design and the content of the activities and the organization. How today the residents influence is carried out with the ideas and visions of the future.My methods include qualitative structured, semi-structured and non-structured interviews within a general frame of a resident questionnaire. The staff members present the current situation and reflect on the reasons for obstacles for resident influence.The group of retired people who lives in structures originating in the Swedish long-term care system and homes for the elderly tends to adjust to given routines and express a low-voiced wish for increased influence.

The thesis aims to describe the current sales climate in the context of complex sales in business-to-business. The purpose is to increase the clients knowledge of sales and test the clients hypothesis that the sales climate is changing from Solution Selling to Insight Selling, further the thesis aims to contribute to the scientific debate of sales. Solution Selling is characterized, as the name suggest, by selling of solution to the customers needs. With Insight Selling the seller has a provocative approach towards the customer and the seller is searching for customers in the need of change. This is a qualitative study conducted with eight interviews and one focus group.

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

To find competencies on a workplace with flex office structure.Companies today, 2012 are facing new opportunities and challenges. Information technology develops, competition is bigger today than ever, increased environmental requirements will be added and new patterns of life and values are occurring. This means that people who work in offices feel strong pressure of conversion, which is something that people experience differently. Therefore it is essential how the working environment is designed in an office. Working in an office means a lot of information processing and we can see large changes taking place.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Occupational Health Service (OHS) has an important role in society. It is designed to prevent illness and strengthen the health of workers. OHS operations and development are currently being studied at the School of Technology and Health at the Royal Institute of Technology in Sweden. One of the industries studied is the home maker service. During the 2010s were such employees one of the most ill groups in Sweden.This master's thesis in occupational environment development and change management focus on examining the special knowledge an OHS and its clients in one home maker service need to strengthen the workers of the industry and find out how the interaction between OHS and home maker service works and how it could be evolved.A qualitative study was conducted in a Swedish city on the basis of an organizational perspective.

The anatomy and physiology of reptiles and mammals are in many ways different, and will therefore possibly complicate anesthetic administration. Lizards are ectothermic and one should keep in mind that a decrease in the lizard?s environmental temperature may result in reductions in anesthetic metabolism. Respiratory depression is a profound problem because lizards lack a diaphragm, making inhalation and expiration completely active processes. This, in combination with cardiac shunting and breath holding makes the effects of anesthesia unpredictable.

Att svenska medier hotas blir allt vanligare. Denna undersökning syftar till att diskutera omfattningen av hot mot journalister och beskriva hotens karaktär genom att lyssna till journalisternas egna erfarenheter. Undersökningen är kvalitativ och bygger på semistrukturerade intervjuer med sex verksamma journalister, varav tre har redaktionellt ansvar. Vi har besökt ett antal redaktioner som har erfarenhet av hot och vänt oss till vissa nyckelpersoner. Utifrån syftet har vi formulerat följande frågeställningar:Vilka uttryck tar sig hoten mot lokaltidningsredaktioner och enskilda medarbetare?Finns det en handlingsplan på redaktionerna när medarbetare hotas? Hur ser den i så fall ut?Vad anser de enskilda journalisterna att hot får för konsekvenser för det journalistiska arbetssättet och ? i förlängningen ? även demokratin?Vår forskningsfråga blir således: om, och i så fall varför, journalister på lokaltidningar uppfattar att olika typ av direkta hot mot dem ökat och vilka konsekvenser journalisterna anser att detta kan ha för deras yrkesutövning.Resultatet av studien visar att alla respondenter har fått hot och trakasserier riktade mot sig och/eller redaktionen.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

Bakgrund: Fysioterapeuter arbetar traditionellt med redan inträffade skador i syfte att återfå funktion och minska smärta. Inom idrottslag arbetar dock fysioterapeuter ofta skadeförebyggande. Marklyft är en tävlingsgren inom styrkelyft men används även ofta inom andra idrotter för såväl prestationsökande och skadeförebyggande syfte. Marklyft utförs ofta med stora belastningar som är påfrestande för greppet och för att klara av de stora belastningarna använder sig många av ett mixat grepp. Det är idag okänt hur ett mixat grepp påverkar symmetrin vid utförandet av ett marklyft.Syfte: Syftet var att undersöka om det uppstod skillnader vad gäller asymmetriska rörelser i form av förskjutning av center of pressure (CoP) vid ett mixat grepp jämfört med pronerat under ett marklyft.Metod: Åtta erfarna manliga styrkelyftare deltog i denna studie.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.