Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

Several studies have analysed the relationship between Normalised DifferenceVegetation Index (NDVI) and radiative surface temperature. A main goal for moststudies have been to find the best method for carrying out land cover classificationsand to study land cover changes, based on a combination between the twoparameters. Since atmospheric components have a significant influence on bothparameters, most applications were based on multi-temporal data. The quality of theindividual values in such a combination is improved, but the biophysical justificationis uncertain. This study presents a different method, based on only the combination ofvalues that have been registered the same day and about the same time of the day.125 daily images of NDVI and 250 images of radiometric temperature were used inorder to analyse the relationship between (1) NDVI and radiative temperature and (2)NDVI and relative temperature difference between early morning and mid-day.Results between NDVI and radiative temperature show a significant negativecorrelation on areas where a distinct growing season develops, and a strong positivcorrelation where vegetation is abscent throghout the season.

Pigs in Swedish organic production systems have been shown to have more findings of arthritis at slaughter, compared to pigs in conventional pig production. With this in mind a study was performed, to primary, investigate variation in exterior, gait and weight gain between sire breeds and, secondly, to investigate variation between herds, season, gender, age and assessment occasion on these recordings. Swedish commercial hybrids, crosses between Norwegian Landrace and Swedish Yorkshire were inseminated with either Hampshire or Duroc as terminal sire. All the pigs had known pedigree as each semen dose contained sperms from one individual boar. All piglets were individually tagged closely after birth, and exterior and gait assessment were performed at two separate occasions, early and late during the fattening period.

When cows in Sweden are inseminated the heat strength is reported to the Swedish milk-recording scheme and AI scheme. Cows that show strong signs of estrus are desirable and the trait is included in the Swedish breeding goal. A strong heat makes it easier to inseminate at the right time and to avoid long and expensive days open. Since ten years the heat strength is scored from one to five by the farmer and reported to the milk-recording scheme and AI scheme. Earlier the score was from one to three and the decision was made by the AI technician.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Syftet med studien ?r att ta reda p? hur sju specialpedagoger verksamma i skolans l?gre ?ldrar beskriver deras organisatoriska f?ruts?ttningar f?r att bedriva h?lsofr?mjande och f?rebyggande elevh?lsoarbete. Vi vill ta reda p? vilka organisatoriska faktorer och arbetsuppgifter som hindrar eller m?jligg?r det h?lsofr?mjande och f?rebyggande arbetet. F?r att besvara syftet har vi tagit avstamp i en kvalitativ metodansats med semistrukturerade intervjuer som metod.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Syfte: Denna uppsats riktar ljus p? anv?ndningen av AI i Sveriges kommuner. Uppsatsen ?mnar att unders?ka hur kommuner tolkar anv?ndningen av AI och dess etiska aspekter. Till f?ljd syftar uppsatsen att belysa hur kommuner hanterar AI och dess etiska aspekter f?r att synligg?ra utmaningar och m?jligheter som kommuner upplever vid inf?randet. Teori: Studien ?r f?rankrad i ?vers?ttningsteorin med hj?lp av studiens analysverktyg som avser id?modellen.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Working horses in developing countries are mostly used for transportation. They are often owned by people with limited economical resources and lack of knowledge about how to take care of the horses and due to this the horses often suffer from problems such as dehydration, poor body condition, lesions and parasitic infections. The aim of this master thesis was to investigate if free veterinary care improved the health and hydration status of working horses in Nicaragua and it was performed as a part of a project called ?Free veterinary assistance for working horses and training of their owners as veterinary promoters in the Pacific coast of Nicaragua?. Five parameters were used to investigate whether free care improved the health of working horses in six towns along the Pacific Coast of Nicaragua.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.