Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Through wing pattern, posture and movement, a harmless moth of the family Brenthia imitates an eight-eyed jumping spider. When an octopus of the species Thaumoctopus mimicus sense danger it can alter its appearance to that of a venomous sea snake. They are both drawing attention to themselves. Nevertheless, and because of this, they are protected. The mechanism is called mimicry.

The aim of this essay is to investigate the murals in the church of Arbrå, what they portrait and how they can be linked to medieval typology as described in Biblia Pauperum (BP), the Poor Man?s Bible. The aim is also to find out what the purpose was to paint medieval churches and what the function of the paintings was. Arbrå Church was painted around 1520-1530, and almost all of the motifs from the Old Testament can be directly traced back to BP as can one motif from the New Testament. Together these paintings represent most of the important events which make out the foundation of the Christian Cult.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Ever since the remains of the ancient city of Pompei was rediscovered in the 18th century it became an important destination for artists and architects. The unique settings made it possible to study the greek and roman art and life which was considered important having knowledge about. As a complement to the architectural education at the Royal Academy of Fine Arts in Stockholm the students could gain funds to make a Grand Tour and visit Pompei.The aim in this study is to explain the study tours the architects made to Pompei by studying their experiences at the site. Fredrik Wilhelm Scholander and Isak Gustaf Clason serves as examples of two swedish architects visiting Pompei on such a tour. In the study I describe why and how these tours were made and why Pompei was an important destination.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

Oilseed rape constitutes a good break crop within a cereal dominated cropping system. The normal sowing time for winter rape in Sweden is August. It's a time in the cropping year characterized by a heavy work load, such as harvest and soil management. In addition, it is often a period with large precipitation. Thus, it is sometimes problematic for the farmer to do the sowing of winter rape at the optimal time.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

This paper is intended to provide a picture of which associations water can wake in the human mind from the perspectives of garden history as well as from that of environmental psychology. I hope to paint a fairly broad picture of our perception of water that can serve as a basis for discussion and as a starting point for different forms of design work in landscape architecture. The historical perspective emphasizes the importance of water as a condition for the emergence of gardens and in a wider perspective the importance of water in early cultures. Also, I describe a picture of how water has been used throughout the history of gardens from early Egypt to the baroque era. The garden history analyzed from an art historical perspective gives a picture of human associations to water, and the history behind these associations is presented. As a compliment to the art history approach, I have chosen to highlight our associations with water from the perspectives of environmental psychology and evolutionary science.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

?Are the headwaters streams at the right position in the map? is a study that has been performed on behalf of Holmen Forest, region Örnsköldsvik. This study will be the basis for deciding if the Hydrology Layer Property map or Holmen Forest map will be used for planning nitrogen fertilization in forestry. The background to this study is that nitrogen fertilization near water will increase the risk of nitrogen leaching out into the water systems, which has a negative impact on the environment. The headstreams positions have been recorded in the field with a GPS and the data analyzed in the geographic information system ArcMap.

This paper is intended to provide a picture of which associations water can wake in the human mind from the perspectives of garden history as well as from that of environmental psychology. I hope to paint a fairly broad picture of our perception of water that can serve as a basis for discussion and as a starting point for different forms of design work in landscape architecture. The historical perspective emphasizes the importance of water as a condition for the emergence of gardens and in a wider perspective the importance of water in early cultures. Also, I describe a picture of how water has been used throughout the history of gardens from early Egypt to the baroque era. The garden history analyzed from an art historical perspective gives a picture of human associations to water, and the history behind these associations is presented. As a compliment to the art history approach, I have chosen to highlight our associations with water from the perspectives of environmental psychology and evolutionary science.

This thesis presents the results from a osteological analysis and a GIS-study aimed to examinedifferences in the located animal bones in different areas of the excavation site of Ajvde.The osteological material came from five excavated square meters on the site and was comparedwith osteological results from other researchers from different areas to create overview and try tosee differences between the areas.The GIS-study took data from all animal bone material excavated on the site, a total of about 2300kilos, and presented them in maps of spatial distribution for each layer (pictures 4, 5, 6 & appendixpicture 1) to see if there were any clusters of activity and changes between the layers. The dating ofthe culture layer and the burial field (pictures 7 & 8) were presented in maps to see if they could becorrelated with what was seen with the animal bones. Pictures of different shorelines were alsopresented (picture 9) to compare with the results that were seen in the changes of animal bones fromdifferent layers.The results of the GIS-study have shown that the activity on the site have moved over time alongthe hight differences of the land. The earlier layers show activity only on the higher elevation butlater moves down, and in the upper layers activity have been all over the excavated area. Clusters ofanimal bones were seen in the so called ?black areas? of the sites (shown in picture 2) but also otherareas contained a lot of animal bones.The results of the osteological analysis have shown that there are differences in what species arefound in different areas.