The environmental requirements and laws on combustion engine emissions are very tough today andthey will become even more stringent in the future. To achieve these requirements there are highdemands on the control systems for these engines. An improved precision in the measurement of anengine's speed and position gives the electronic control system an even better timing when it comes tofuel injection and ignition. This makes the engine more fuel efficient, reducing the emissions. This thesisis part of a collaborative project between Hoerbiger Control Systems and subsidiaries.

Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

The Swedish ostrich production started about thirteen years ago and still there are no Swedish recommendations regarding ostriches? space requirements. The European Council give recommendations and the Swedish Board of Agriculture (SJV) has a proposal, but so far the producers follow Danish regulations regarding space requirements. The Swedish Animal Welfare Agency are about to set standards for the ostriches? space requirements, and therefore the Swedish ostrich producers, together with The Federation of Swedish Farmers (LRF) ask for a scientific background to these decisions. This thesis is a preliminary study at the prospect of a future experiment on which factors important for ostriches? space requirements and welfare will be examined more thouroughly.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.

The purpose of this paper is to investigate analysts' and investors' possibility to compare different companies' information in accounting for goodwill under IFRS in their annual and semi-annual reports. The study was based on IAS 34 on interim reporting, IAS 36 impairment of goodwill and the comparability requirement of the financial statements. Therefore, the comparability requirements? of the IASB Framework, previous studies on the comparability after the implementation of IFRS and also the relevance of goodwill was studied. We used a qualitative textual analysis to examine whether the recognition of goodwill is considered to be comparable between our sample of companies' annual and semi-annual reports from 2008 and 2009 data.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

Health and convenience trends dominate the food industry and retailing business of today. The health consciousness is spreading while appealing product attributes concerning taste and packaging also are increasingly important. At the same time, the competition is growing fierce in the Swedish market with hard discount formats and niche concepts who also are trying to provide the market with perishables. Therefore, the pressure to lower prices is increasing making economies of scale and rationalization progressively more important. In 2004, ICA launched private label meat packaged in a modified atmosphere. Consequently, many stores went from in-store cutting-up and packaging to selling centrally packaged and distributed meat. ICA is now developing a concept with fresh fish in modified atmosphere packages and needs to increase the knowledge about the market and the consumer.

This thesis examines the problems related to IT in the Swedish healthcare system, specifically the drug searching part of the electronic healthcare systems used in Sweden. The question formulation is divided into two questions: What parameters and functions are of greatest importance when performing a search on drugs, and how should these be presented in a graphical user interface? Thus the purpose is to answer these questions through developing a design concept, in the form of a prototype, which describes how a drug search can be carried out.The entry point is a central quality checked drug database that is managed and owned by Swedish county councils and regions. The problem is attacked through user-centered methods where interviews of physicians and developers, in conjunction with observations, are used to give an overview of the problem area as well as to specify a requirements specification for the prototype that this thesis aims to develop. The thesis result is a requirements specification in combination with a prototype that exemplifies how drug searching can be performed, the prototype is based the requirements gathered from the interviews with the user group of physicians..

This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

Stora Enso Packaging är ett av Sveriges ledande företag inom wellpapptillverkning. Företaget tillverkar specialdesignade förpackningslådor och har fabriker i Vikingstad, Jönköping och Skene. Då alla företag i branschen har samma råvara, papper, har Stora Enso Packaging identifierat service mot kund som ett sätt att skapa konkurrensfördelar. Leveransledtiden mot kund är ett serviceelement som detta examensarbete avser att titta närmare på.Examensarbetets syfte är att utreda möjligheten att gå från en ledtid på femton dagar till tio dagar för nyorderprocessen på Stora Enso Packaging  i Vikingstad, kartlägga denna process samt föreslå rutiner och systemstöd för minskningen av ledtiderna.För att lösa uppgiften har kartläggning av Stora Enso Packagings nyorderprocess genomförts. Kartläggningen har tagits fram via intervjuer av anställda som är inblandade i nyorderprocessen samt av material på Stora Enso Packagings intranät.Då nyorderprocessen analyserats har en rad olika teorier fungerat som stöd.

The European Union is struggling to maintain democracy and tries to increase the participation among the citizens in Europe. The European Citizens? Initiative, ECI, is a platform established by the European Commission to allow citizens to propose new legislation. ?Water and sanitation are a human right! Water is a public good, not a commodity!? is the first ECI that has met the requirements.

 Conclusion:Medical treatment may have a role in platelet count after transfusion. Since the TACSI platelets passed the quality requirements, and the vast majority of patients platelet count increased after TACSI platelet transfusion, the TACSI platelets will replace the old method to produce platelets at the Uppsala University hospital.  Methods: A new approach that pools 8 buffy coats (TACSI platelets) that were separated into 2 units instead of 4-6 buffy coats pooled to 1 unit was investigated in this study. After the platelets were extracted from the buffy coats their quality was controlled and subsequently the platelet product was evaluated in 96 patients. Results: The results showed that 80 % of the platelet units passed the European quality requirements. Further, the platelet count was increased in most patients that received TACSI platelets. Conclusion: Medical treatment may have a role in platelet count after transfusion.

This is a project with the main purpose to create a visual identity and platform for the release of the new started record label Human vs Environment, by finding a form and logotype for the homepage and packaging of the first vinyl ep record by the artist Mr Kaizen. This has also been an exploratory work with the target to get a broader competence in the field of visual communication and increase my understanding of the designs communicative aspects of running a design project with an external partner from concept to finished product..