Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

Bergsbruket har under lång tid haft stor betydelse för Sverige både ekonomiskt och politiskt. Det har också haft en inverkan på naturmiljön bland annat genom huggningar för bränsle och utsläpp av tungmetaller. Ett av de områden i Sverige som är mest känt för sin metallhantering är Bergslagen. Idag är många gruvor nedlagda. En som fortfarande är i drift är gruvan i Garpenberg i Dalarna.

Detta arbete diskuterar och belyser hur utvecklingen av mineralogiskanalysmetodik har sett ut genom att tillämpa samtbeskriva ett urval av både klassisk och modern metodik. Grundentill arbetet är en stensamling som byggts upp av HolgerJensen och beskrivits av hans son Rolf Jensen på 1940-talet.Den nya förteckningen som sammanställts jämförs med dengamla som Rolf gjorde. Den enda metoden som inte tillämpas ärgoniometri, vilken dock beskrivs på grund av dess historiskabetydelse i utvecklingen av kristallmorfologin. Klassisk metodikoch egenskaper som beskrivs och har tillämpats är exempelvisblåsrörsanalys, hårdhetstestning, streckfärg, spaltning ochbrott. Bland modern metodik valdes malmmikroskopi, röntgendiffraktion,elektronmikrosondanalys och Ramanspektroskopi.Tidigt under arbetets gång noterades att erfarenhet krävs oberoendemetodik för att få korrekt resultat och att det kommer dröjalänge innan de klassiska metoderna blir förlegade.

Berggrunden på norra Utö har karterats i fält som en del av projektet Metamorphic map of Sweden. Vidare har stuffer analyserats i tunnslip och mikrosond, för att med datorprogrammen THERMOCALC, AX samt Anovitz & Essenses kalcit-dolomit-geotermometer (1987) för kunna fastställa vilken grad av metamorfos området utsatts för. Berggrunden visade sig utgöras främst av pelagiska metasediment som karbonatbergarter och gråvackor, med avbrott i form av felsiska vulkaniter som följer lagringen. I fält såväl som mikroskop indikerade resultaten en relativt låg grad av metamorfos. De geotermobarymetriska uträkningarna som utförs i rapporten stöder detta resultat och bestämmer temperaturen till mellan 430 och 697°C samt trycket 4.5±2.3Kbar, vilket placerar metamorfosen inom ?Amphibolite facies?.

Dagens förskolebarn är den första riktigt digitala generationen. De har vuxit upp med datorer och Internet sedan de kom till världen. Följaktligen är barns värld idag både analog och digital och barnen rör sig ledigt mellan dessa två världar. Digitala spel har gjort att barn förstår sig på den nya tekniken på ett sätt som vuxna inte gör. Digitala spel vädjar till barns fantasi och ger ett alternativ till verkligheten AFK (Away From Keyboard).

Norberg ingår i Bergslagen som länge stod för den övervägande delen av Sveriges exportinkomster tack vare den omfattande produktionen och exporten av främst järn men också koppar och silver. Norberg tillhör järnbergslagen och här började malmbrytningen tidigt. Bergsbrukets påverkan på naturmiljön har inte studerats så ingående men historiska källor ger vissa glimtar om läget. Dessa källor är dock av olika orsaker inte alltid helt tillförlitliga och de sträcker sig oftast inte längre tillbaka än till 1600-talet, varför de behöver kompletteras med material från andra typer av källor för att skapa en bättre helhetsbild. I denna studie har en pollen- och kolpartikelanalys av sjön Kalvens sediment, i Norberg Västmanland, utförts för att studera vegetationsutvecklingen i området kring sjön där både gruvor, hyttor och hammare har legat. Sedimentet i sjön är varvigt vilket har gjort att man med stor precision kunnat datera olika förändringar.

High levels of Hg in fish in Swedish lakes have been a problem along time in Sweden. The major concern is production and accumulation of the most toxic form of mercury; methyl mercury (MeHg). Consequently, in about half of our 83 000 lakes fish contain concentrations above the recommended limit for human consumption of 0,5 mg mercury per kg fresh weight (most of it in the form of MeHg). Consumption of fish containing too high levels of MeHg may cause problems for both humans and animals. Three major sources of MeHg in surface waters are: 1) runoff from terrestrial areas, 2) deposition from the atmosphere, and 3) internal production of MeHg in lakes and streams. The aim of this study was to investigate the effect of clear-cutting on the concentration of Hg and MeHg into draining streams.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

There are several objects of age whose provenance and history has disappeared with time. The purpose of this thesis is to find out which analyzing methods that gives results and how the different methods can be combined and /or established in each other. The investigations centers around an embroidery, belonging to Tämta church, with unknown origin, use and age. The embroidery is long and narrow with applications in the form of dragons and eagles on a ground of velvet cloth. The dragons and eagles are covered with metal threads.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The aim of this study is to provide a comprehensive overview of C?ronis beeswax varnish by Lefranc & Bourgeois; its contents, aging properties, solubility, and possible removal methods, with G?teborgs Konstmuseum?s ?Gothenburg Museum of Art? collection as the stud??s material? The purpose of the study is to provide a basis for decision-making regarding the treatment of works treated with C?ronis wax varnish. The study is based on contemporary conservation theory and interpretation-based decision-making and utilizes FTIR, microscopy, and solubility tests to examine the properties of the varnish. The study shows that C?ronis does not appear to be harmful to the treated works and has retained its solubility properties and transparency over time.