An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

 Aim. To describe patients who have got a recommendation by a telenurse to visit the emergency department and how many of these patients could have received care in the primary health care instead. Further on, the aim was to describe if there are patients not following the recommendations.Methods. Quantitative, descriptive study, with an examination of medical records of the patients, which the telenurses recommended to visit the emergency department, during one week. Assessments whether the patient could seek medical care at the primary health care was made, firstly based on the telenurses documentation and secondly on both the telenurses and the emergency department´s documentation.Results.

A growing interest for the climate and the environment has led to an increased interest forenvironmentally friendly and renewable energy sources, such as biogas. Planning new biogasplants requires a decision basis including facts about approximate amounts of biogas possibleto produce at the plant. The purpose of this thesis is to develop a model that calculates theapproximate biogas and digestate production from a planned or existing biogas plant.Developing the model required a literature review and studies of calculations concerningbiogas and digestate production performed by WSP Sweden AB. As a complement to themodel development, facts about substrates for biogas production were compiled through aliterature review. In addition the methane potential from selected materials was determined bybatch experiments.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

This report is focusing upon relining from a client?s point of view. Potential buyers are given a presentation of the different methods available today together with a general briefing describing the process. An important part of this report are the interviews that took place with already established customers. Property owners, managers, pipe cleaners, and project managers whom all been in contact with relining have answered the questions given along with their own thoughts and have also given recommendations of other persons to talk to.

The purpose of this thesis is to contribute to a further understanding of the complexity in green consumer behaviour by examining how and why individuals priorities values, personal norms and identity in green consumer behaviour. The thesis employs a qualitative approach with an abductive strategy. The empirical data was produced through in-depth interviews with green consumers. Based upon the empirical findings and theoretical concepts, a conceptual model was introduced to illustrate how consumers prioritise between several values when assessing green products. The prioritisation is dependent on internalised values as well as the product function and the need that the consumer seeks fulfilled.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

The subject for our bachelor thesis is how sugar is portrayed in Aftonbladet. By analyzing newspapers from 1995 and 2013 we wanted to research if the portrayal of sugar has changed during the years. We have noticed that there is a trend of being healthy and fit today. ?Strong is the new skinny? is a quote we can see in social media and on blogs today.

Phosphorus (P) is an essential nutrient but a surplus could lead to eutrophication. Furthermore, the minerals used to produce the mineral phosphate is a non renewable resource. There are in other words several reasons to reduce the leakage of P and the agriculture is one important area to attend. The aim of this work has been to investigate if carbon-rich arable soils content contain more P than arable soils with low carbon content. Moreover it has been calculated if the carbon-rich soils could pose a risk of P leakage by comparing their delivery of P with the plant uptake. The work has consisted of compiling the results from former gathered and analysed soil samples of 130 Swedish arable soils. The fractions of P considered are water soluble P (Pw), ammonium lactate-extractable P (P-AL), hydrochloric acid-soluble P (P-HCl), organic ammonium lactate-extractable P (Porg-AL) and inorganic ammonium lactate-extractable P (Porg-HCl).

This thesis examines the ongoing European political debate on the links between livestock production and climate change. In the end of 2006 the UN Food and Agriculture Organization (FAO) released their report Livestock?s long shadow, showing that livestock production represents some 18 % of the total global greenhouse gas emissions. The purpose of this paper is to explore the European Commission?s position and response to this question since the release of the report.Using Arne Naess? argumentation analysis, statements made by the Commission will be systematically organized and broken apart.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Starting in January 2007, capital adequacy of internationally active banks will be regulated by the new Basel Capital Accord, International Convergence of Capital Measurement and Capital Standards ? a revised framework, [Basel II]. The framework introduces for the first time minimum capital requirements for operational risk and encourages market discipline of capital adequacy by initiating requirements for public disclosure of quantitative and qualitative information on operational risk exposure. This thesis examines the nature, definition, management and public disclosure of operational risk in Scandinavian banks based on regulations and recommendations presented in Basel II. We find that the models currently available for addition of operational risk to the capital requirement do not reflect actual operational risk exposure of banks.