This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

It is popular to keep reptiles as pets in Swedish households. The number of households reporting reptile ownership is more than 15 000 (SCB, 2006). This means that a veterinary practice should consider how to take care of reptiles as patients. The aim of this study was to examine literature and studies concerning safe handling and restraint of reptiles as well as the effects of acute and long term stress response and to suggest a simplified plan for handling reptiles in a veterinary practice. The result of literary studies is that common recommendations for safe handling and restraint of reptiles is based on old techniques and experiences from safe handling of wild animals. The main concern is safety for the veterinary nurse and for the reptile. Stress studies indicate that acute stress response is not harmful for the animal i long term. On the other hand studies of the effect of prolonged stress are not conclusive.

The Swedish boat industry is considered quite conservative and subject to only limited development. The purpose of the study is to explain the structure of the boat industry, to analyze and evaluate ways of competing and provide recommendations for developing a competitive strategy. The aim of this thesis is to explain how to be competitive in the Swedish boat industry. To be able to do so three areas are used to deepen as well as broaden the understanding. The three areas within competitiveness we have chosen to highlight are differentiation, individualization and distribution.

Sweden experienced a decline in exports of 16 percent in the period after the financial crisis. The decline has created a lot of question marks regarding the traditional exports which has started a process with the aim of finding Sweden?s next cash cow in export.Sweden adopted stringent environmental laws early which positioned them as a strong nation in environmental awareness. The stringent environmental legislation meant that the Swedish companies were required to minimize the environmental impact, which created a demand for eco-efficient products. Despite the early demand for eco-efficient products, the international success of the Swedish cleantech companies has been modest.The government can increase firms international competitiveness by encouraging, supporting and promoting activities on the domestic market.

The Swedish National Heritage Board (RAÄ) is the agency of the Swedish government responsible for heritage and historic environment issues. During the last couple of years the agency has implemented a new management control system, the balanced scorecard, originally developed for profit driven organizations. Organizations within the public sector have other objectives than profit seeking organizations, and there have been difficulties in applying the balanced scorecard model in the public sector. Therefore we find it interesting to examine the reasons behind these difficulties and believe that some answers can be found in the identification process of the balanced scorecard. Therefore we aim to perform a case study of RAÄ and explain how the identification process of the components of their balanced scorecard can affect further usage of the model as a management control tool.

Background:Breast milk has many good qualities and recommendations declare that breast milk alone is the most favorable choice for newborn babies up to six months of age. When the mother can´t provide her own breast milk for her baby, donor milk is a valuable source. Unfortunately the demand is often higher than the supply and thereby milk banks suffer from shortages. Aim: Highlighting women's experiences of being milk donors. Method: The study has been conducted as a literature review in which existing research has been used.

Tussilago farfara, coltsfoot, is a troublesome perennial weed with deep lying rhizome, which can vegetatively generate new plants. The mechanical control of coltsfoot that is used today, "starvation", which consists of several cultivations of the soil, which fragmentises the rhizome. This results in production of new shoots, which leads to depletion of nutrient resources; as long the new plant is not allowed to establish. However, very little research has been done to investigate how the starving technique affects the regenerative ability of coltsfoot. The purpose of this experiment with coltsfoot was to investigate how fragmentation and burial depths affect the time of emergence, number of emerged shoots per rhizome fragment, number of shoots per node, and if the germination ability within nodes changes during the experiment.

Electrical stunning is the method that has been used in Sweden to stun broilers prior to slaughter. However, for reasons of animal welfare and meat quality, research has been made in the EU to develop new stunning methods. Gas stunning is now regarded as the best alternative. In this study literature has been reviewed with focus on different gas stunning systems and observations have been made at two different slaughterhouses regarding animal welfare before, during and directly after stunning. At one slaughter plant carbondioxide was used in a two-stage system where the birds were standing on a conveyer belt during the stunning procedure.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

The Yara N-Tester is a handheld chlorophyll meter which can be used in several different crops as an aid to determine if there is a need of complementary fertilization with nitrogen (N) or not. If the crop requires more N the N-Tester will recommend an amount in kg per ha. The possibility to assess the need of N depends on the strong relation that exists between chlorophyll- and N-concentration in the leaves of plants. In the multiannual trial series ?Nitrogen to winter wheat at different soil conditions? measurements with the N-Tester was carried out at flag leaf emergence (GS 37). In this work the result of measurements, the NTesters ability to estimate the need of N in winter wheat, will be presented for the years 2008-2011.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

AbstractBackground: To have type 2 diabetes affects life situation and thus the experiences oflifestyle changes. Treatment of type 2 diabetes consists of adapting to new lifestyles and theirown involvement. Orem (2001) theory of self-care has been used as a kind of scientificfoundation. Aim: The purpose of this study is to describe the experiences of lifestyle changesin people with type 2 diabetes. Method: Systematic literature review of descriptive andinductive synthesis approach has been used.

The purpose of this study was to examine and evaluate an assembly station at Kalmar Industries in respect to ergonomics. The study was to result in an improved assembly station with lower risk of work- related injuries. It was the study group?s expectation that the measures taken at the assembly station can function as guidance and an inspiration for other ergonomic improvements at the company. Several goals related to the purpose were established as guidance for the study.The mechanic?s work situation was mapped through a series of methods.