Today it is common to spray against most weeds by using very expensive weed-killers. The goal for every farmer is to have as low costs as possible for their use of machines and weed-killers. Therefore it is in everyones interest to find other methods to fight the weeds. Finding a way to reduce the rise and growth of weeds already at the preparation of the soil would lower the number of laps over the field and also decrease the amount of weed-killing dose. Tests show that by harrow in the dark it is possible to reduce the population of weeds with up to 60%, but the normal reduction would be about 20-30%. To verify the results above we made tests by using two different methods of preparing the soil. We tested ploughing and harrowing in daylight and during night. Later we checked the number of different weeds in areas prepared in daylight and during night. By studying the results from the different methods used we found a considerable reduction of some kinds of weeds in areas prepared during night..

Usability is a way to study how good a website is which is what our research builds upon. On a mission from Liseberg our purpose is to find out if their website liseberg.se is good from a user?s perspective. Our way of carrying this out where grounded upon a qualitative study through observations and following interviews with a number of participants. By compositing tools of method we have started with the theories descriptions of usability tests and we have also used the theories to be able to reflect around and to understand the results from the tests.

Clustered Columnstore Indexes (CCI) and In-Memory Online Transaction Processing (OLTP) are two new techniques that were introduced with Microsoft?s new database management system SQL Server 2014.The thesis analyzes these two techniques, describes the theory behind them and also the background information that needs to be known to understand more of the new techniques. Performance tests of the new techniques have been performed to see how much faster response time we can get and less storage we need to use where the result is represented by performance diagrams and a compression diagram. This thesis is a cooperative work with a company called Trimma and the result is used as support to decide if these new techniques could be of advantage for the company.The test consists of five test queries with different purposes. The result is illustrated by diagrams that show the result and another diagram that shows how much the data gets compressed with the different techniques.

The communication with government and municipality through Internet has in-creased during the last couple of years. Therefore we have chosen to focus our bachelor thesis in this particularly area and the needs for usable web services for the citizens. In this bachelor thesis we are studying a increasing group users, namely elderly citizens. During the study we have analysed E-governments ser-vices usability through usability tests. The combination of conversations and meetings with individuals, observations of interactions and literature studies give us the opportunity to explore the users needs.

There are two species of potato cyst nematode (PCN), the yellow, Globodera rostochiensis, and the white, Globodera pallida. Each of them can appear in different pathotypes. These are separated by testing the nematode ability to multiply on a number of potato cultivars with different resistance properties. The aim of this project was to examine the virulence of Swedish and foreign PCN populations and to compare two test methods. Biotests are today the only available tests used to study virulence.

Idre Fjäll currently has not full control of how visitors experience their site or if it has good usability. I have helped the company to do a usability test on their website to see how and where any improvements can be made on the page before the winter season 2010. I have also done a survey to investigate how users perceive Idre Fjälls website. Ten people of various ages participated in the survey. All test subjects was recorded with both audio and screen activity during the tests.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

The idea with this study is to examine if there are a connection between how optimistic people are in relation to how stressed they feel. The result from the survey is based on materials from a questionnaire has been sent to fifty persons of varying age and sexes. The questionnaire has also been sent to students from Karlstad University but also to friends and acquaintances. The data is measured with SE- and LOT-tests. The issues concerned in which scope respondents experiences themselves stressed and optimistic and how the connection is between experienced stress and optimism in relation to results on the figure tests.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

Övergången från CATIA V4 till CATIA V5 innebär nya möjligheter för konstruktörerna på Scania att arbeta med Knowledge Based Engineering, KBE, för att effektivisera och kvalitets-säkra sitt arbete. Då CATIA V5 är en ny plattform som innehåller verktyg med samlingsnamnet knowledgware, för att bygga in kunskap i modeller ville Scania undersöka potentialen i att arbeta med KBE, och hur detta skulle kunna ske på Scania. Vid traditionell produktutveckling tas en helt ny artikel fram vid behov och ofta innebär detta att arbete som tidigare utförts, görs om igen. Syftet med arbetet är därför att undersöka huruvida KBE i CATIA V5 kan erbjuda möjligheter att återanvända kunskap från tidigare arbete och samtidigt kvalitetssäkra denna, samt utreda vilka knowledgewarelicenser som i så fall kan vara lämpliga för Scania.För att göra detta har en litteraturstudie genomförts för att undersöka vad som har gjorts inom området, och även en intervjustudie har utförts inom R&D på Scania. Vidare har sakkunniga på Linköpings Universitet och Tekniska Högskolan i Jönköping intervjuats.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

We set out to compare two different categories of workers: the, so called, white- and blue collar workers. The studies aim was to measure if there were any observable differences between the two in means of optimism and sense of coherence. There are two tools created for measuring optimism and sense of coherence, the Life Orientation Test ? Revised (LOT-R) measures an individual?s level of optimism and Aaron Antonovsky devised a test for measuring an individual?s level of sense of coherence (SOC). Optimism is best explained like a way to measure anticipation, how an individual expect future events to fall out.