The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

The first part of the thesis consists of a brief introduction to the general principles of target detection and the sensor-systems used. In the following part there is a theoretical description of the algorithms this thesis focuses on. The detection algorithms described in this paper are called Cell Average, Ordered Statistics, 2parameter and Gammadetector. Two different discriminators called Extended Fractal Features and Quadratic Gamma Discriminator are also described. The algorithms are tested on three different types of data, simulated SAR-pictures, authentic SAR-targets and IR-pictures.

Syftet med detta examensarbete är att undersöka lärares uppfattningar om det nationella provet i engelska, samt hur dessa lärare arbetar med provet för att kunna hjälpa eleverna att nå sina kursmål. Undersökningsmetoden är kvalitativ då vi intervjuat fyra lärare i engelska på en högstadieskola. Intervjufrågorna har innefattat allt från hur lärare arbetar med det nationella provet och hur de ser på provet, till hur målen med det nationella provet uppfylls. Resultatet av undersökningen är att det nationella provet underlättar lärarnas arbete. Lärarna anser även att provet fungerar som ett bra stöd då de ska betygsätta eleverna.

Purpose: The purposes of the current study were to investigate whether there were any differences in the perceptual ability between professional and non-professional ice-hockey players and whether professional players are better at distinguishing, paying attention to and concentrating on what is important during intense physical activity. Method: Twenty male ice-hockey players (10 from both the Swedish first and third divisions) participated in the study. Wingate test were used for physiological measurements while three psychological tests were presented in front of the participants. Stroop, Flanker and Fast counting tests were used to measure perceptual and coping abilities during intense physical activity and the differences between the two groups. Results: Fast counting and Flanker word 2 tests showed a significant difference between the two groups, whereby the professional groups was faster and more accurate than the non-professional group in answering.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This study investigated relationships between high level language functions and phonological working memory in adults by correlating results oftests in a test battery used for investigating subtle language disorders and digit span task results. Results of two digit span tasks were analyzed in relation to demographic factors. 103 subjects without neurological disease, 20 ? 79 years old, participated. Significant correlations were found between the digit span tasks and most of the tests.

This report is about the development of a prototype of a mobile application and a web application that will help diabetes patients in their own treatment and ease diabetes nurses work with their diabetes patients. The mobile application is a digital version of a diabetes diary used by the Örebro County Council primary care to ease in diabetes treatments. The report also covers tests with users which were conducted on potential users to get some sort of feedback from groups other than customer and colleagues. Tests with users showed that there was an interest in a mobile application and it was a highly appreciated project. The web application ease diabetes nurses in their work with their diabetes patients in the way that the web application can display graphs of the patient's blood glucose level. .

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

Lately the popularity to keep different species of dwarf hamsters has increased in Sweden. The requirements of the Swedish legislation to keep hamsters as pets are low which could be a reason for the increasing popularity. Hamsters are in nature generally nocturnal and can travel far distances to find food sources during their active part of the day. Their eyesight is poor, but is compensated by their well-developed hearing and olfaction. ?Run about balls? are made of plastic and the hamster is placed inside it where after the ball is placed on the floor and the hamster can then run protected outside the cage.

In this paper we take a look at digital applications to help the user with public transportation. The main goal was to evaluate the problem a user can face when aiming to use the public transportation system, and to create a application for Apple Iphone that can enhance and help the user, no matter if he is familiar with the local public transportation system, or if he is less familiar with it. The aim was that the user wouldnt need any previous knowledge to be able to use our application. We combined Location-Based Services with Realtime-travelinformation and trip planning to examine if this combination could make both of the two different user-groups satisfied. To understand the problematics a user faces when approaching the public transportation-scene, Scenario-Based Design is evaluated as a method to grasp this problem.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The idea with this study is to examine if there are a connection between how optimistic people are in relation to how stressed they feel. The result from the survey is based on materials from a questionnaire has been sent to fifty persons of varying age and sexes. The questionnaire has also been sent to students from Karlstad University but also to friends and acquaintances. The data is measured with SE- and LOT-tests. The issues concerned in which scope respondents experiences themselves stressed and optimistic and how the connection is between experienced stress and optimism in relation to results on the figure tests.

Small scale internal consumer tests provide a company with a cheap way to get valuable information regarding their products advantages and flaws. Therefore the demand for possibilities to do this kind of test has increased. This report is part of a new sensory project at Unilever. It presents a method for sensory comparison of the company?s own products with the corresponding competitor products.