Predicting corporate failure is an increasingly important topic in the world of economics today. This paper, with the help of the credit ranking company Syna AB, aims to investigate a few different statistic strategies to do just that. This task is accomplished by using a data material of 250 000 Swedish companies divided into two subsamples. The first sample is used to develop the model and the second as a validation sample. The model developing sample holds 160 000 companies divided into five different subgroups based on size and age.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

Background: Since1994, the EU NickelDirective is limiting the release of nickel from objects that are in prolongedcontact with skin. Despite this, nickel is still the most common cause of contactallergy in industrialized countries. This could implicate that other productswith short contact to the skin, which are not restricted by EU´s legislation inREACH (Registration, Evaluation, Authorisation and Restriction of Chemicalsubstances), could be a source of nickel or cobalt exposure. There is no limitfor cobalt release within REACH. To determine if there is cobalt or nickelpresent on the surface of a material and if metal can be released in contactwith the skin, there are quantitative and qualitative methods, such as the DMG(dimethylglyoxime)-test, the cobalt spot-test and a method for releasedetermination according to EN1811.Objectives: Laptops are not included in the REACH legislation.

Reading difficulties is the most common learning difficulty in the western world and it is common that people with reading disabilities also exhibit arithmetic difficulties. Different theories about the cause of the relationship exists, one theory describes the importance of good phonological ability in reading as well as in arithmetic, while another theory describes the importance of a reliable number system and that only a subgroup of students with reading disabilities also have difficulties with arithmetic. The purpose of this study is to investigate how students with reading difficulties (RD), without any known mathematical difficulties, perform on mathematical tasks relative to a control group. The study was theoretically grounded on the Triple code model (Dehaene, 1992), which is a model for numerical information processing that describes how various numerical and arithmetic tasks are processed through three distinct representation systems in the brain, a verbal and a visual representation system and a quantity system. Reading skills, phonological skills, arithmetic skills and number processing skills were examined in 61 students through a variety of tests.

SUMMARYThe first and most basic skill a rider needs to learn is how to sit correctly in the saddle. This decides whether or not the rider will be able to follow the horse?s movements and use her riding aids in an efficient way. This correct seat is based on a straight line between the axis of the hip and heel. The seat must rest against the saddle with equal weight on both buttocks and the inside of the thighs.

The purpose of the study was to investigate whether or not Icelandic horses are less severely affected in clinical symptoms of cough or decreased performance than other breeds of horses. A breed variation in chronic respiratory disease severity was suspected based on clinical experience at the Institution for surgery & medicine, large animal, SLU Uppsala. A retrospective journal study of 17 Icelandic horses and 17 Swedish Standardbred horses with chronic problems with cough and/or decreased performance compared several measurements of disease severity. The clinical signs, physical examination and laboratory testing results compared were respiratory rate, abdominal breathing, lung auscultation, endoscopy results, broncho-alveolar lavage (BAL) results and the blood gases pO2 and pCO2. All parameters were available for all 34 individuals except for the blood gases, which were analysed, in only four Icelandic horses and four Swedish Standardbred horses. The only parameters that appeared different between the two groups were respiratory rate and pO2. The four Icelandic horses, which had blood gases analysed, had more severe hypoxemia.

International reading comprehension studies, like PIRLS and PISA, state that the reading comprehension of Swedish students has decreased significantly since 2000. As a consequence, the National Agency of Education has made reading comprehension teaching a prioritised field in terms of further education for teachers. There has also been a change in Lgr 11, the national curriculum for compulsory school, where it is stated that teaching in reading strategies shall be a part of the central content throughout compulsory school. When the pupils reach upper secondary school level, reading comprehension education is no longer a part of the curriculum. Today, students at upper secondary school for individuals with learning disabilities currently share the same curriculum as the ordinary upper secondary school.

I detta arbete har studerats hur flödet i en flerstegs- bearbetningsprocess påverkas av stokastiska fluktuationer och störningar i de enskilda processtegen. Mera bestämt har analys utförts av hur de stokastiska variationerna i operationstiderna kan och bör modelleras vid simuleringsstudier. Även hur påverkan av valet av sådana stokastiska modeller kan tänkas ha på processen i sin helhet, till exempel avseende total genomloppstid.Examensarbetet syftar till att undersöka hur val av fördelning på parametern operationstid, påverkar resultatfaktorn genomloppstid vid flödessimuleringar. För att finna svar på denna påverkan har en fallstudie utförts, med utgångspunkt av indata från en produkt som tillverkas på Volvo Aero. Denna produkt genomgår en tillverkningssekvens innehållande 18 stycken bearbetningsoperationer innefattande tre olika processtyper (automatisk, halvautomatisk och manuell).

The largest project at the AICG lab at Linköping University, Cognitive models for virtual characters, focuses on creating an agent architecture for intelligent, virtual characters. The goal is to create an agent that acts naturally and gives a realistic user experience. The purpose of this thesis is to develop and implement an appropriate learning model that fits the existing agent architecture using an agile project methodology. The model developed can be seen as an online unsupervised reinforcement learning model that enhances experiences through reward. The model is based on Maes model where new effects are created depending on whether the agent is fulfilling its goals or not.The model we have developed is based on constant monitoring of the system.