Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.

Följande rapport är resultatet av det examensarbete som utförts våren 2011 inom innovativ produktion/logistik vid Mälardalens Högskola. Examensarbete behandlar ämnet Green Production med fokus på skillnader mellan ett produktionssystem som bygger på Lean Production och ett som bygger på Green Production. Områden som berörs i rapporten är de verktyg som används i de olika produktionssystemen, hur arbetet med miljöförbättrande åtgärder kan se ut i praktiken samt vilka svårigheter som finns vid arbete med miljöförbättrande åtgärder i ett företag. Examensarbetet består av en litteraturstudie där aktuell litteratur studerats inom området samt en intervjustudie som genomförts med insatta inom miljöfrågor kopplat till produktion samt operatörer.Bakgrunden till examensarbetet grundar sig i att världen står inför en framtid där många utav de råmaterial som används idag vid produktion inte kommer att kunna nyttjas i framtiden. Detta i kombination med de miljöproblem som människan åsamkat, har bidragit till att många företag insett att miljöaspekter måste vara i åtanke genom hela produktionsprocessen.Den uppfattning som erhållits genom intervjustudierna är att det är viktigt för ett företag att visa att de arbetar med miljöförbättrande åtgärder.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This thesis on the sustainable urban development has the intent to discuss the conservator?s position in alteration of the built environment. An essential component of the thesis consists of a case study in the form of an entry in an open architectural competition for the development of Furuset, an urban residential area in Norway. The thesis? discussion is based on two approaches to change and socio-economic transformations, considered being dominant within the heritage theory and practice: the production of ideas and great narratives and conservation as an instrumental tool.

I Rosersberg har Trafikverket byggt en ny trafikplats under 2011-2013. Projektet stötte på komplikationer som ledde till att arbetet försenades främst på grund av förekomsten av arsenik i jord, berg samt grundvattnet. Dessa förseningar ledde till att projektet försenades med ca nio och en halv månad till en merkostnad på över 30 miljoner kronor till följd av över 200 (ÄTA).Detta projekt behandlar grundämnet arsenik i byggfasen och hur en hantering av ämnet bör gå till. Genom instudering av arbetsmaterial från projektet samt intervjuer med personer som varit inblandade har undersökningar gjorts och en sammanställning av dessa återfinns i rapporten. I rapporten har jag arbetat med att sammanfatta metoderna som Trafikverket arbetat med och hur projektet fortlöpt. Jag har även arbetat med att ta fram alternativa metoder för hantering och sanering av arsenik för grundvatten, jord- och bergmassor.Problemlösning som jag sökt svar på är:? Hur man stabiliserar arsenik och sedan hindrar det från att sprida sig från en nivå till en annan.? Hur man kan sanera och hantera arsenik när det förekommer i produktionsskedet, med en rimlig lösning.? Hur man återanvänder sanerade massorna.? Hur utförandet av sanering kan göras på kortare tid och med mindre kostnader.Dag- och grundvatten samlades i dammar som därefter pumpades ut till vägdiken för att därefter luftas genom självfall till Verkaån.

The purpose of my study is to determine students? attitudes to the Natural Science subject. I want to contribute to scientific discourse about different learning styles that can respond to childrens? requirements in teaching as well as to determine the student?s experience of learning styles. The studies were carried out at an upper secondary school in Stockholm (spring term 2011) for three different classes.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

During the winter 2011 Isaksson and Andersson did a time budget study on Nordens Ark?s Przewalskis horses during daytime when there were visitors and caretakers in the park. This time budget study was made during daytime and when there were no visitors or caretakers in the park. The horses where observed in the morning (5.30-6.30 am) and in the evening (5.45-6.45 pm) during four days. In addition to a time budget, the horses? positions in the enclosure were registered.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

Hidden away in the pristine landscape on the northeast shore of the Dominican Republic, the remote village of Miches is on the verge of shifting its economic resource base from traditional fishing into what could become an international model for sustainable tourism. The aim of this thesis was to produce a vision of a waterfront park near the center of the village; demonstrating concept-based landscape design that reflects the goals of sustainable development originating from the local incentive structure. A composite landscape analysis and design concept both served to inform and guide the design work, which was executed through model building, hand drawings, and production of a visual presentation in the format of an architectural competition entry. The design concept, All invited, signifies the distinction between the development that is about to take place in Miches and the otherwise common all-inclusive resorts, where tourists are set apart from the local community and spend most of their time within the fenced-off premises of the hotel. All invited also captures the typical Dominican hospitality, and mirrors the aspirations of turning Miches into a safe and welcoming place for visitors. The result is a public park design that is equally inviting local residents as it is to tourists, and where the unique qualities of the site are emphasized without being exploited.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.