Elanvändningen till ventilation har ökat med 40 % sedan 1990 i Sverige. Ventilationen är en miljöbov enligt undersökningar som visar att elanvändningen till ventilationssystemens fläktar kan reduceras. Minskning av elförbrukningen kan t.ex. uppnås genom utbyte av fläktmotor till en EC-motor eller till en fläkt med bakåtböjda skovlar och direktdrift. Effektivieringsåtgärder kan ge en lägre elförbrukning på upptill 50 % i vissa applikationer.Ventilationsfläktarna i Sverige förbrukar 12,3 TWh per år.

This report will outline a proposal for the improvement of the baggage sorting facility at Arlanda airport. Swedavia is a state owned company group that operates, owns and develops airports in Sweden. One of their main roles is to create accessibility needed to facilitate and streamline the work at the airport.Swedavia is constantly working to develop new solutions and enhancements that will help to standardize and automate the work at airports without major impact on climate and above all adapt these solutions to work.The project has been aimed to identify and isolate the problem at the check-in counter, investigate the possibility of setting a speed control on the DC motor driving the luggage conveyer belt at the check-in desk so that the luggage does not lose tracking already there, as well as evaluate the new sorting systems planned to be introduce in the upcoming refurbishment of the sorting area.To determine the parameters that are used to regulate the speed of the baggage conveyor belt, information about the inputs and outputs that participated in the process was gathered. Information was collected both practically and theoretically. Process was followed and monitored by the supervisor of the company, and a theoretical study was done separately on my own.

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

In my opinion, the city is a place fit as much for children as for grown-ups. I have noticed, however, that this is not a view shared by everyone. Does not the urban space belong as much to children as to other people? Yes, of course. Today and in the future most people will live and grow to be adults in cities. I would even take it as far as to say that without children, there will be no real city.

Denna rapport är ett examensarbete utfört av Per Jonsson, student vid Karlstads Universitet. Examensarbetet omfattar 22,5 högskolepoäng och är ett obligatoriskt moment inom högskoleingenjörsprogrammet i ämnet maskinteknik.   Företaget Trollspeed tillverkar högeffektiva racingmotorer för användning av racingteam på elitnivå. Stora turboaggregat samt tillhörande utrustning sätts samman med specialbyggda avgasgrenrör för att uppnå största möjliga effektuttag. Tillsammans bildar dessa sammansatta delar en hög vikt och måste därför stagas upp.   Detta arbete handlar om att ta fram en ny lösning för uppstagningen, då dagens lösning leder till oundviklig spänningspåverkan i grenröret som bidrar till att sprickbildningar uppstår. Projektet är indelat i två delar där första delen omfattar framtagning av ett mätverktyg för analysering av rörelse samt kraftpåverkan hos grenröret. Framtagningen av mätverktyget resulterade i en mätskala med visare för visualisering av rörelser och monterade lastceller för analysering av kraftpåverkan.

The purpose of this study is to investigate how twelve middle school teachers use educational tools and what influences their choice of educational tools in Swedish language writing instruction. To answer this purpose, three research questions were formulated: What does writing instruction look like for middle school students according to the teachers in the study? What influences teachers' choice and use of educational tools in writing instruction? What opportunities and challenges do teachers experience in Swedish language writing instruction when using different educational tools? Twelve teachers from variously sized municipalities and with different experiences participated in the study through purposive sampling and convenience sampling. The chosen method is qualitative semi-structured teacher interviews. To analyse the results, this study employs analytical tools from the sociocultural perspective, using concepts such as mediation, appropriation, the zone of proximal development, and scaffolding. The results show that both analogue and digital tools are used in the teachers' writing instruction. The choice of tools should be based on pedagogical considerations, with an emphasis on social interaction and collaboration during the learning process.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Övertoner orsakade av varvtalsstyrda motordrifter ger problem i industrisystem. Syftet med studien är att identifiera problemen och ge rekommendationer för att undvika dem. Studien utfördes som examensjobb på KTH för konsultföretaget Ramböll. En litteraturstudie i ämnet kombinerades med elkvalitémätningar på drifter hos Sandvik Mining.Elkvalitéproblem orsakade av varvtalsstyrda motordrifter kommer till stor del av att frekvensstyrningen ger olinjärt strömuttag som, om nätet inte är tillräckligt starkt, påverkar spänningskvalitén. Problemen kan vara driftstopp, störd utrustning och ökat slitage på utrustning för att nämna några.Denna studie visar att vid ändringar i system innehållande övertoner kan framtida övertonshalter approximeras för vissa fall.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

In order to facilitate design and maintenance of such a large and complex site as a nuclear power plant, all system functions must be described in a stringent way. In the past, these descriptions consisted of text documents and logical diagrams, but today there are an increasing number of object-oriented programs available on the market which might be used for this purpose. This Master Thesis has made a closer study of one of these programs named Rational Rose. The principal of the program is to facilitate software design and development, not to create models of plants. However, using the program the same way as developing software, specifying actors then gradually extend the model with use cases, use cases diagrams etc, the same methods can be used when modelling plants.

Scanias busschassimontering i So?derta?lje har en vision att kraftigt o?ka kapaciteten pa? produktionslinan fra?n dagens 12 chassier per dag till 38 chassier. Fo?r att möjliggöra kapacitetso?kningen beho?ver takttiden pa? produktionslinan reduceras avseva?rt. Ma?let med examensarbetet var att utveckla ett koncept fo?r det nya kapacitetsma?let med syfte att ge fo?rslag pa? en mer effektiv monteringsprocess, teknik och layout.

Stamning är en komplex motorisk talstörning, vars neurologisk bakgrund fortfarande inte är klarlagd. En växande mängd studier ger dock stöd för att stamning kan vara orsakat av strukturella avvikelser i den vänstra hemisfären. En studie (Sommer et al., 2003) som använde transkraniell magnetstimulering (TMS) för att undersöka kortikal inhibition hos personer som stammar (PsS) fann som ett bi-fynd att den stammande gruppen hade signifikant högre motortrösklar (MT) för vänster hemisfärs handmotorarea, det vill säga att det krävdes starkare stimulering för att väcka en muskelrespons i den kontralaterala handen. Resultat har dock inte uppmärksammats av senare forskning, och behöver verifieras. Den aktuella studien syftade till att undersöka om PsS tenderar att ha förhöjda MT, samt om det finns avvikande hemisfärsskilnader i MT hos PsS.