As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Does a person´s self esteem contribute in the process of creating false memories? Previous studies show that mood is related to false memories as well as to self esteem. This led to the focus of this study, to examine the relationship between false memory and self esteem. The question is examined by comparing the amount of false memories produced in the Deese-Roediger-McDermott (DRM) procedure with people´s scores on Rosenberg´s self-esteem scale. 59 people participated in a test with three different elements, a self esteem test and a memory test with both recollection and free recall.

Detta examensarbete har utförts på initiativ av Scania CV AB. Scania är en världsledande tillverkare av tunga lastbilar, bussar och industri- och marinmotorer. Konstruktionsgruppen inom Scania som detta examensarbete utfördes vid är benämnd NMKA och är en del av avdelningen NM ? Engine development som bedriver forskning & utveckling av Scania motorer.Denna avhandling inom produktutveckling tjänar syftet som slutgiltigt examinationsmoment för civilingenjörsprogrammet Innovation och produktdesign på Mälardalens högskola. Arbetet har utgått ifrån en metod för produktutveckling som lärs ut i samband med utbildningen.Uppdraget har baserats på frågeställningen att utveckla ett robust klamningskoncept för kablage på motor, som uppfyller de ergonomiska och konstruktionsmässiga krav som Scania ställer på sina artiklar.

Transfer pricing including internal loans have increased in recent years, making it easier for companies to minimize their taxable income. After the Swedish court case Diligentia, there have been discussions regarding the influence of a parent company's transparency and control of the subsidiary with regards to the interest rates on internal loans. In court cases that followed Diligentia, the Swedish Tax Agency argued that a parent company always could be assumed to have sufficient transparency and control of the operations in the subsidiary, and therefore reduce the risk on their debt obligations. This thesis seeks to analyze the effects of the transparency and control a parent company has with regards to interest rates on internal loans. The analysis is conducted by analyzing court cases similar to Diligentia.

AbstractThe purpose of this essay is to investigate the views Swedish elementary school teachers produce on the subject of ethics. The teachers? thoughts on selection among ethical notions is described and also how these notions are assessed. The essay proceeds from the central content and the knowledge requirement in the syllabus of religious knowledge.The empirical survey is based on qualitative scientific interviews with four teachers employed in grades 4-6 at different schools.The teachers find ethics in its current state of the syllabus hard to define and they find encounters with parents and pupils difficult in their tasks. The selection of ethics is decided by previously planned basic values education or from conflicts erupting during schools hours.

In today´s forestry, assessments of needs for thinning are based on basal area measurements. This is an indirect measurement. The approach and the developed assessment tables are based on an assumed production forest, which implies that management proposals in stands that deviate from the basic model may be misleading. Since Walter Bitterlich in 1948 launched the idea of the relascope, several modifications have been developed for different purposes. In common is that all are based on a certain angle measurement principle.

Background: Multiple myeloma is a malignant incurable cancer disease associated with severe chronic pain. The nurse has several important roles in the management of patients with multiple myeloma. This study focuses on nurse´s roles including the caring of pain relief.Aim: The aim of this study was to elucidate the nurse?s role in giving care to patients with multiple myeloma and associated chronic pain.Method: This literature study was based on scientific articles.Results: The nurse is in a key position to facilitate ongoing adequate pain and psychosocial assessment of patients with multiple myeloma. The study presents ways of relieving pain and suffering via different ways of caring management.

Syftet med denna studie var att undersöka förekomsten av självskadebeteende hos tonåringar, om detta skiljer sig åt mellan könen och om samband kan uppvisas med självkänsla och mindfulness.128 elever i årskurs nio från tre skolor besvarade frågeformulären Deliberate Self-Harm Inventory, Rosenberg Self-Esteem Scale samt Mindful Attention Awareness Scale.Resultaten visade att 65,9 procent av deltagarna skadat sig själva vid åtminstone ett tillfälle, och 41,4 procent vid flera tillfällen. Det förekommer ingen signifikant skillnad mellan könen. Hos flickorna korrelerar självskadebeteende med låg självkänsla och låg grad av mindfulness. Pojkar som skadat sig själva många gånger uppvisar lägre grad av mindfulness än övriga pojkar. Resultaten indikerar att det troligtvis finns flera olika anledningar till att ungdomar skadar sig själva..

SummaryAimThe study examines a theoretical model developed to capture cyclist´s perceptions of the route environment. The survey focuses on if level two and three in the theoretical model captures what it´s intended to do. More specific we ask ourselves how the three appraisals (unsafe/safe by traffic reasons, stimulating/inhibiting route environment, unsafe/safe by other reasons) in the model´s second level relates among themselves and if these three appraisals can capture the degree of environmental well-being/unwell-being in the model´s third level. The questions were: Do the three appraisals differ among themselves? What is the difference/-s in such cases? And, is there a correlation between any of the three appraisals and environmental unwell-being/well-being? What is the correlation in such case? MethodThe gathering of data was done through questionnaires.

HiGtech är en projektgrupp på Högskolan i Gävle vilka konstruerar och bygger energisnåla tävlingsfordon. Ett av fordonen tävlar i Shell Eco Marathons prototypklass för bensindrivna förbränningsmotorer och drivs av en på högskolan konstruerad motor. Motorns effekt överförs till en kedjetransmission via en inköpt och modifierad centrifugalkoppling. Den nuvarande centrifugalkopplingen väger cirka 1,5 kg. Då en stor faktor för tävlingsresultatet är fordonets rullmotstånd, vilken beror av fordonets vikt, har målet med detta arbete varit att konstruera en specialanpassad centrifugalkoppling, vars vikt endast är hälften så stor som motorns nuvarande koppling.

Examensarbetet utfördes vid produktionsenheten för Hägglunds Drives AB i Mellansel, Ångermanland. Syftet har varit att föreslå förändringar inom produktionssystemet för att den totala ledtiden för hydraulmotor Compact CA skall reduceras. Arbetet har baserats på en analys över hur produktionsstyrning och orderhantering skall fungera för att en ledtidsreducering från fyra veckor till nio dagar skall vara möjlig. Ledtiden har i arbetet definierats som den tid som åtgår från att en order läggs fram till att en motor är leveransklar till kund. Vidare har arbetet fokuserats på de sex huvuddetaljer som ingår i varje motor och som tillverkas från råämne till slutdetalj.

 Aim. To describe patients who have got a recommendation by a telenurse to visit the emergency department and how many of these patients could have received care in the primary health care instead. Further on, the aim was to describe if there are patients not following the recommendations.Methods. Quantitative, descriptive study, with an examination of medical records of the patients, which the telenurses recommended to visit the emergency department, during one week. Assessments whether the patient could seek medical care at the primary health care was made, firstly based on the telenurses documentation and secondly on both the telenurses and the emergency department´s documentation.Results.